Cisco 3560 Poe8 Manual

 
A-7
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix A      Technical Specifications
Power Requirements
DC input voltage –36 to –72 VDC 
3 to 1.5 A
Power consumption 94 W, 321 BTUs per hour
Physical Dimensions
Weight 9 lb (4.1 kg)
Dimensions (H x W x D) 1.73 x 17.5 x 11.8 in. (4.4 x 44.5 x 30.1 cm)
Table A-13 Specifications for the Catalyst 3560V2-24TS-SD Switch (continued)
Environmental Ranges 

 
A-8
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix A      Technical Specifications 

 
B-1
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
APPENDIXB
Connector and Cable Specifications
This appendix describes the Catalyst 3560 switch ports and the cables and adapters that you use to 
connect the switch to other devices and includes these sections:
“Connector Specifications” section on page B-1
“Cable and Adapter Specifications” section on page B-4
Connector Specifications
10/100 and 10/100/1000 Ports, page B-1
SFP Module Ports, page B-2
Dual-Purpose Ports, page B-3
Console...

 
B-2
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix B      Connector and Cable Specifications
Connector Specifications
Figure B-1 10/100 Port Pinouts
Figure B-2 shows the pinout for a 10/100/1000 port.
Figure B-2 10/100/1000 Port Pinouts
SFP Module Ports
The Catalyst 3560 switch uses SFP modules for fiber-optic and copper uplinks. See the Catalyst 3560 
release notes for a list of supported SFP modules.
Figure B-3 Fiber-Optic SFP Module LC Connector
H5318
23 1 45678Pin Label
1
2
3...

 
B-3
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix B      Connector and Cable Specifications
Connector Specifications
Figure B-4 Copper SFP Module RJ-45 Connector
Dual-Purpose Ports
The Ethernet port on a dual-purpose port uses standard RJ-45 connectors. Figure B-5 shows the pinouts.
Figure B-5 10/100/1000 Port Pinouts
The SFP module slot on a dual-purpose port uses SFP modules for fiber-optic and copper uplink ports. 
See the Catalyst 3560 release notes for a list of supported...

 
B-4
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix B      Connector and Cable Specifications
Cable and Adapter Specifications
Cable and Adapter Specifications
SFP Module Cable Specifications, page B-4
Two Twisted-Pair Cable Pinouts, page B-5
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports, page B-6
Identifying a Crossover Cable, page B-6
Adapter Pinouts, page B-7
SFP Module Cable Specifications
Ta b l e  B - 1 lists the cable specifications for the fiber-optic SFP module...

 
B-5
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix B      Connector and Cable Specifications
Cable and Adapter Specifications
Two Twisted-Pair Cable Pinouts
Figure B-6 and Figure B-7 show the schematics of two twisted-pair cables for connecting to 10BASE-T- 
and 100BASE-TX-compatible devices.
Figure B-6 Two Twisted-Pair Straight-Through Cable Schematic
Figure B-7 Two Twisted-Pair Crossover Cable Schematic
CWDM 1470, 1490, 
1510, 1530, 
1550, 1570, 
1590, 1610 SMF G.6522— 62 miles...

 
B-6
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix B      Connector and Cable Specifications
Cable and Adapter Specifications
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports
Figure B-8 and Figure B-9 show the schematics of four twisted-pair cables for 1000BASE-T SFP 
module ports on Catalyst 3560 switches.
Figure B-8 Four Twisted-Pair Straight-Through Cable Schematic for 1000BASE-T Ports
Figure B-9 Four Twisted-Pair Crossover Cable Schematics for 1000BASE-T Ports
Identifying...

 
B-7
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix B      Connector and Cable Specifications
Cable and Adapter Specifications
Figure B-10 Identifying a Crossover Cable
Adapter Pinouts
Ta b l e  B - 2 lists the pinouts for the console port, the RJ-45-to-DB-9 adapter cable, and the console device.
Ta b l e  B - 3 lists the pinouts for the console port, RJ-45-to-DB-25 female DTE adapter, and the console 
device. 
NoteYou can order an RJ-45-to-DB-25 female DTE adapter, which is not...

 
B-8
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix B      Connector and Cable Specifications
Cable and Adapter Specifications
Table B-3 Console Port Signaling Using a DB-25 Adapter  
Switch 
Console 
Port (DTE)RJ-45-to-DB-25 
Terminal AdapterConsole 
Device
Signal DB-25 Pin Signal
RT S 5 C T S
DTR 6 DSR
TxD 3 RxD
GND 7 GND
GND 7 GND
RxD 2 TxD
DSR 20 DTR
CTS 4 RTS