Cisco 3560 Poe8 Manual

 
4-5
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 4      Troubleshooting
Clearing the Switch IP Address and Configuration
These circumstances can result in a mismatch:
A manually set speed or duplex parameter is different from the manually set speed or duplex 
parameter on the connected port.
A port is set to autonegotiate, and the connected port is set to full duplex with no autonegotiation.
To maximize switch performance and to ensure a link, follow one of these guidelines when...

 
4-6
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 4      Troubleshooting
Locating the Switch Serial Number
The switch now behaves like an unconfigured switch. You can configure the switch by using Express 
Setup as described in the switch getting started guide that is included with the switch.
You can also configure the switch by using the CLI setup procedure described in Appendix D, 
“Configuring the Switch with the CLI-Based Setup Program.” 
Locating the Switch Serial Number
If...

 
4-7
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 4      Troubleshooting
Locating the Switch Serial Number
Figure 4-4 Serial Number Location on the Catalyst 3560-48TS-S and 3560V2-48TS Switch
Figure 4-5 Serial Number Location on the Catalyst 3560-48TS, Catalyst 3560G-48PS, Catalyst 
3750G-48TS, and Catalyst 3750G-48PS Switches
Figure 4-6 Serial Number Location on the Catalyst 3560 8-PS and the Catalyst 3560 12-PS-S 
Switches
CONSOLE
126757, 781-00303-01A0SN: XXXNNNNXXXX
CONSOLED...

 
4-8
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 4      Troubleshooting
Locating the Switch Serial Number 

 
A-1
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
APPENDIXA
Technical Specifications
Table A-1 on page A-1, Environmental Ranges for all Catalyst 3560 Switches
Table A-2 on page A-2, Technical Specifications for the Catalyst 3560-24PS Switch
Table A-3 on page A-2, Specifications for the Catalyst 3560-48PS Switch
Table A-4 on page A-3, Specifications for the Catalyst 3560-24TS-S Switch
Table A-5 on page A-3, Specifications for the Catalyst 3560-48TS-S Switch
Table A-6 on page A-3,...

 
A-2
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix A      Technical Specifications
 Table A-2 Technical Specifications for the Catalyst 3560-24PS Switch 
Power Requirements
AC input voltage 100 to 240 VAC (autoranging) 
5.5 A to 2.8 A, 50 to 60 Hz
DC input voltage for RPS 675  + 12 V @7.5 A and –48 V @7.8 A
Maximum power consumption 485 W
Maximum power dissipation 115 W, 393 BTUs per hour
Power rating 0.485 KVA
Power over Ethernet
15.4 W per port maximum, 370 W switch maximum...

 
A-3
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix A      Technical Specifications
Table A-4 Specifications for the Catalyst 3560-24TS-S Switch 
Power Requirements
AC input voltage 100 to 240 VAC (autoranging) 450 to 190 mA, 
50 to 60 Hz
DC input voltages for RPS 675+ 12 V @ 5 A 
Power consumption 45 W
Maximum power consumption 45 W, 154 BTUs per hour
Maximum power dissipation 0.075 KVA
Physical Dimensions
Weight 8.5 lb (3.9 kg) 
Dimensions (H x D x W) 1.73 x 11.81 x 17.5 in....

 
A-4
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix A      Technical Specifications
Table A-7 Specifications for the Catalyst 3560G-24TS Switch 
Power Requirements
AC input voltage 100 to 240 VAC (autoranging) 
1.5 to 3 A, 50 to 60 Hz
DC input voltages for RPS 675  + 12 V @10.5 A 
Maximum power consumption 100 W
Maximum power dissipation 100 W, 314 BTUs per hour
Power rating 0.10 KVA
Physical Dimensions
Weight 12 lb (5.44 kg)
Dimensions (H x D x W) 1.73 x 14.9 x 17.5 in. (4.39 x...

 
A-5
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix A      Technical Specifications
 
Table A-9 Specifications for the Catalyst 3560G-48TS Switch 
Power Requirements
AC input voltage 100 to 240 VAC (autoranging) 
3 to 1.5 A, 50 to 60 Hz
DC input voltages for RPS 675+ 12 V @17.5 A
Maximum power consumption 160 W
Maximum power dissipation 160 W, 500 BTUs per hour
Power rating 0.16 KVA
Physical Dimensions
Weight 14 lb (6.4 kg)
Dimensions (H x D x W) 1.73 x 16.1 x 17.5 in. (4.39 x 40.9...

 
A-6
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix A      Technical Specifications
DC input voltages for 
RPS 2300 and 675+12 V @14 A and –48 V @7.8 A
Power consumption 560 W
Power dissipation 220 W, 690 BTUs per hour
Power rating 0.56 kVA
Power over Ethernet
Range from 4 to 15.4 W per port, up to 370 W switch maximum
Physical Dimensions
Weight 11.3 lb (5.1 kg)
Dimensions (H x W x D) 1.73 x 17.5 x 11.8 in. (4.4 x 44.5 x 30.1 cm)
Table A-12 Specifications for the Catalyst...