Christie Projector J Series 2.0, 2.4, And 3.0kW User Manual

Section 3: Operation
J Series 2.0, 2.4, and 3.0kW User Manual3-15020-100707-01  Rev. 1  (10-2011)
Table 3.1 - Abbreviations for Signal Type
The first 5 items in this table are analog RGB with various sync combinations indicating Sync Source when 
editing the channel: 
TO COPY A CHANNEL, highlight the desired channel in the Channel Setup menu, then press E
NTER to go 
to the Select Channel Operation submenu. Select “Copy” and press E
NTER—a new channel will be created. It 
is identical to original, which...

3-16J Series 2.0, 2.4, and 3.0kW User Manual020-100707-01  Rev. 1   (10-2011)
Section 3: Operation
TO DELETE A CHANNEL, highlight the desired channel in the Channel Setup menu, then press ENTER to 
activate the Select Channel Operation submenu. Select Delete and press E
NTER—a window will appear to 
confirm the deletion of this channel.
TO DELETE MULTIPLE CHANNELS highlight any channel in the Channel Setup menu and press E
NTER 
to go to the Select Channel Operation submenu. Select Delete Unlocked Only...

Section 3: Operation
J Series 2.0, 2.4, and 3.0kW User Manual3-17020-100707-01  Rev. 1  (10-2011)
If desired, review and/or edit the following channel setups in the Channel Edit menu:
•NAME 
An alphanumeric label can be defined and/or changed here. Channel names can be up to 12 characters in 
length. The default name is the horizontal and vertical sync frequencies.
• CHANNEL
 A two-digit channel number can be changed here. 
NOTES: 1) If you enter a channel number that already 
exists, a dialog message...

3-18J Series 2.0, 2.4, and 3.0kW User Manual020-100707-01  Rev. 1   (10-2011)
Section 3: Operation
From your presentation, you can access any of the individual options in these menus by pressing MENU 
followed by the appropriate two-digit number representing their location in the menu system. For example, 
press M
ENU 24 to quickly access the “Color Space” option in the Image Settings menu.
NOTES: 1) For certain options, preference may be to use a “direct key” from presentation level to go directly 
to a...

Section 3: Operation
J Series 2.0, 2.4, and 3.0kW User Manual3-19020-100707-01  Rev. 1  (10-2011)
RESIZE PRESETS
NOTE: The same resize presets are available to all HD and SXGA+ screen models. However, the graphics 
used to describe each preset in this section are of the SXGA+ models only. 
Resize Presets will display an image in its native 
resolution (no resizing) or will resize the image 
by maximizing either the height, width or both 
height and width, or will resize to the maximum 
size possible...

3-20J Series 2.0, 2.4, and 3.0kW User Manual020-100707-01  Rev. 1   (10-2011)
Section 3: Operation
 FULL SIZE - uses all pixels for displaying the image, 
regardless of source or original aspect ratio. Incoming 
source material having a different aspect ratio than the 
projector will be stretched for display. 
FULL WIDTH - fills the projector display from left-to-right 
without changing the original aspect ratio of the image. 
Depending on the source, data at the top and bottom may be 
discarded...

Section 3: Operation
J Series 2.0, 2.4, and 3.0kW User Manual3-21020-100707-01  Rev. 1  (10-2011)
ANAMORPHIC - displays an anamorphic image in its native 16:9 aspect ratio. 
The image will fill the screen from side-to-side and be centered between black 
bars at top and bottom. 
SIZE
Controls both the image width and height in tandem, maintaining the current 
aspect ratio of the displayed signal data. 
VERTICAL STRETCH
Adjusts the height of the image while keeping the width constant. Use “Vertical...

3-22J Series 2.0, 2.4, and 3.0kW User Manual020-100707-01  Rev. 1   (10-2011)
Section 3: Operation
KEEP ASPECT ON AUTO SETUP
Ensures that auto setup for any source will maintain the input aspect ratio when the default size is calculated. 
NTSC and PAL formats always keep aspect ratio during auto setup regardless of the Keep Aspect on Auto 
Setup control.
BLANKING - Submenu
This submenu consists of the following options:
•ACTIVE INPUT WINDOW 
This read-only value indicates the current size of your...

Section 3: Operation
J Series 2.0, 2.4, and 3.0kW User Manual3-23020-100707-01  Rev. 1  (10-2011)
3.7 Image Settings Menu
Use the Image Settings menu to alter your main 
image without affecting its size or position. 
Changes made are applied immediately and are 
saved when you exit the menu (press E
XIT or 
M
ENU). Options not available for the projector 
model or source are disabled and appear dim 
(grey).
CONTRAST
“Contrast” increases or decreases the perceived difference between light and dark areas...

3-24J Series 2.0, 2.4, and 3.0kW User Manual020-100707-01  Rev. 1   (10-2011)
Section 3: Operation
• VIDEO STANDARD 
The projector automatically detects the incoming horizontal and vertical frequencies and sets the projector 
processing of this signal to the corresponding standard. The current video standard name appears in the Video 
Options submenu, and includes an “A” if it is auto-detected. Press E
NTER to view or select a different video 
standard from those available to the projector—any that are...