Canyon Router CNP-WF514N1 User Manual

71 
 
All allowed MAC addresses will be displayed in ‘MAC Address Filtering Table’ (1). 
Here are descriptions of every setup items: 
 
Delete Selected (2):    If you want to delete a specific MAC address entry, check 
the ‘select’ box of the MAC address you want to delete, then 
click ‘Delete Selected’ button. (You can select more than 
one MAC addresses). 
 
Delete All (3):    If you want to delete all MAC addresses listed here, please 
click ‘Delete All’ button. 
 
Enable    To enforce MAC address...

72 
Add (7):    Click ‘Add’ button to add the MAC address and associated 
comment to the MAC address filtering table. 
 
Clear (8):    Click ‘Clear’ to remove the value you inputted in MAC 
address and comment field. 
 
After you finish with all settings, please click ‘Apply’ (9) button and the following 
message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on other setup 
procedures, or click ‘Apply’ to reboot the router so the...

73 
2-7-5 Wi-Fi Protected Setup (WPS) 
 
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between 
wireless network clients and this wireless router. You don’t have to select encryption 
mode and input a long encryption passphrase every time when you need to setup a 
wireless client, you only have to press a button on wireless client and this wireless 
router, and the WPS will do the rest for you. 
 
This wireless router supports two types of WPS: Push-Button Configuration (PBC), 
and...

74 
Here are descriptions of every setup items: 
 
Enable WPS (1):  Check this box to enable WPS function, uncheck it to 
disable WPS. 
 
WPS Information (2):  WPS-related system information will be displayed here: 
 
WPS Status: If the wireless security (encryption) function 
of this wireless router is properly set, you’ll see ‘Configured’ 
message here. If wireless security function has not been set, 
you’ll see ‘unConfigured’. 
 
PinCode Self: This is the WPS PIN code of this wireless 
router. This...

75 
requests from wireless clients for 2 minutes. The ‘WLAN’ 
LED on the wireless router will be steady on for 2 minutes 
when this wireless router is waiting for incoming WPS 
request. 
 
Configure      Please input the PIN code of the wireless client you wish 
by client              to connect, and click ‘Start PIN’ button. 
PinCode (5):  The ‘WLAN’ LED on the wireless router will be steady on 
when this wireless router is waiting for incoming WPS 
request. 
 
  

76 
2-7-6 Security Tips for Wireless Network 
 
Here are some quick tips to help you improve the security level of your wireless 
network: 
 
1. Never use simple words (like school, apple and computer) as WEP encryption or 
WPA passphrase. 
 
2. A complicated (the combination of number, alphabet, even symbol, and long 
enough) WEP key and WPA passphrase is much safer than simple and short ones. 
Remember that the wireless client is capable to keep the key or passphrase for 
you, so you only have to input...

77 
Chapter III: Advanced Functions 
 
3-1 Quality of Service (QoS) 
 
Quality of service provides an efficient way for computers on the network to share 
the internet bandwidth with a promised quality of internet service. Without QoS, all 
computers and devices on the network will compete with each other to get internet 
bandwidth, and some applications which require guaranteed bandwidth (like video 
streaming and network telephone) will be affected, therefore an unpleasing result 
will occur, like the...

78 
Total Download    You can set the limit of total download bandwidth in 
Bandwidth (2):    kbits. To disable download bandwidth limitation, input ‘0’ 
here. 
 
Total Upload        You can set the limit of total upload bandwidth in kbits. 
Bandwidth (3):      To disable upload bandwidth limitation, input ‘0’ here. 
 
Current QoS      All existing QoS rules will be displayed here. 
Table (4):   
 
Add (5):  Click ‘add’ button to add a new QoS rule, see section 3-1-2 
‘Add a new QoS rule’ below. 
 
Edit...

79 
 
Please click ‘Continue’ to back to previous setup menu; to continue on other setup 
procedures, or click ‘Apply’ to reboot the router so the settings will take effect 
(Please wait for about 30 seconds while router is rebooting). 
If you want to reset all settings in this page back to previously-saved value, please 
click ‘Cancel’ button. 
 
3-1-2 Add a new QoS rule 
 
After you click ‘Add’ button in QoS menu, the following message will appear: 
 
 
Here are descriptions of every setup items:...

80 
 
Local IP         Specify the local (source) IP address that will be affected 
Address (c):      by this rule. Please input the starting IP address in the left 
field, and input the end IP address in the right field to define 
a range of IP addresses, or just input the IP address in the 
left field to define a single IP address. 
 
Local Port        Please input the range of local (source) port number that 
Range  (d):    will be affected by this rule. If you want to apply this rule on 
port 80 to...