Canyon Router CNP-WF514N1 User Manual

21 
2-3-2 Setup procedure for ‘Fixed-IP xDSL’: 
 
 
Here are descriptions of every setup items: 
 
IP address        Please input IP address assigned by your service provider. 
assigned by your       
Service Provider (1):     
 
Subnet Mask (2):    Please input subnet mask assigned by your service provider   
 
DNS address (3):    Please input the IP address of DNS server provided by your 
service provider. 
 
Service Provider      Please input the IP address of DNS server provided by your   
Gateway...

22 
2-3-3 Setup procedure for ‘PPPoE xDSL’: 
 
 
 
Here are descriptions of every setup items: 
 
User Name (1):    Please input user name assigned by your Internet service 
provider here. 
 
Password (2):    Please input the password assigned by your Internet 
service provider here. 
 
Service Name (3):    Please give a name to this Internet service, this is optional 
 
MTU  (4):    Please input the MTU value of your network connection here. 
If you don’t know, you can use default value. 
 
Connection...

23 
 
 
 
 
 
 
 
 
 
 
 
 
 
2-3-4 Setup procedure for ‘PPTP xDSL’: 
 
PPTP xDSL requires two kinds of setting: WAN interface setting (setup IP address) 
and PPTP setting (PPTP user name and password). Here we start from WAN interface 
setting: 
 
 
 
Select the type of how you obtain IP address from your service provider here. You 
can choose ‘Obtain an IP address automatically’ (equal to DHCP, please refer to 
‘Cable Modem’ section above), or ‘Use the following IP address’ (i.e. static IP 
address)....

24 
 
 
Here are descriptions of every setup items: 
User  Name  (1):    Please input user ID (user name) assigned by your Internet 
service provider here. 
 
Password (2):    Please input the password assigned by your Internet 
service provider here. 
 
PPTP    Please input the IP address of PPTP gateway assigned by 
Gateway (3):    your Internet service provider here. 
 
Connection        Please input the connection ID here, this is optional and 
ID (4):          you can leave it blank. 
 
MTU  (5):...

25 
Idle Time        Please input the idle time out of Internet connection 
Out (8):    you wish to use, and refer to last section for detailed 
descriptions. 
 
When you finish with all settings, please click ‘OK (9); if you want to go back to 
previous menu, click ‘Back’. 
 
2-3-5 Setup procedure for ‘L2TP xDSL’: 
 
L2TP is another popular connection method for xDSL and other Internet connection 
types, and all required setting items are the same with PPTP connection. 
 
Like PPTP, there are two kinds...

26 
Now please go to L2TP settings section: 
 
 
 
Here are descriptions of every setup items: 
 
User Name (1):      Please input user ID (user name) assigned by your    
     Internet service provider here. 
 
Password (2):    Please input the password assigned by your Internet 
service provider here. 
 
L2TP Gateway (3):    Please input the IP address of PPTP gateway assigned by 
your Internet service provider here. 
 
MTU  (4):    Please input the MTU value of your network connection here. 
If you...

27 
2-3-6 Setup procedure for ‘Telstra Big Pond’: 
 
 
 
This setting only works when you’re using Telstra big pond’s network service in 
Australia. You need to input: 
User Name (1):      Please input the user name assigned by Telstra. 
 
Password (2):      Please input the password assigned by Telstra. 
 
User decide login       Check this box to choose login server by yourself. 
server manually (3):   
 
Login Server(4):    Please input the IP address of login server here. 
 
When you finish with all...

28 
Please click ‘Apply’ button to prepare to restart the router, and you’ll see this 
message: 
 
 
 
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router 
management interface again, and the router is ready with new settings.  

29 
2-4 Basic Setup 
 
In this chapter, you’ll know how to change the time zone, password, and remote 
management settings. Please start your web browser and log onto router web 
management interface, then click ‘General Setup’ button on the left, or click 
‘General Setup’ link at the upper-right corner of web management interface. 
 
 
 
 
2-4-1 Time zone and time auto-synchronization 
 
Please follow the following instructions to set time zone and time 
auto-synchronization parameters: 
 
Please click...

30 
 
 
Press ‘Continue’ to save the settings made and back to web management interface; 
press ‘Apply’ to save the settings made and restart the router so the settings will 
take effect after it reboots. 
 
 
 
 
2-4-2 Change management password 
 
Default password of this router is 1234, and it’s displayed on the login prompt when 
accessed from web browser. There’s a security risk if you don’t change the default 
password, since everyone can see it. This is very important when you have wireless...