Canyon Router CNP-WF514N1 User Manual

51 
 
 
If you want to delete a specific item, please check the ‘Select’ box of a MAC 
address and IP address mapping (1), then click ‘Delete Selected’ button (2); if 
you want to delete all mappings, click ‘Delete All’ (3). If you want to deselect all 
mappings, click ‘Reset (4). 
 
After you finish all LAN settings, please click ‘Apply’ button on the bottom of this 
page. After you click ‘Apply’, the following message will be displayed on your web 
browser: 
 
 
 
Please click ‘Continue’ to back to...

52 
2-7 Wireless LAN Configuration 
 
If your computer, PDA, game console, or other network devices which is equipped 
with wireless network interface, you can use the wireless function of this router to 
let them connect to Internet and share resources with other computers with 
wired-LAN connection. You can also use the built-in security functions to protect 
your network from being intruded by malicious intruders. 
 
Please follow the following instructions to set wireless parameters: 
 
Please click...

53 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on other setup 
procedures, or click ‘Apply’ to reboot the router so the settings will take effect 
(Please wait for about 30 seconds while router is rebooting). 
 
2-7-1 Basic Wireless Settings 
 
Please click ‘Wireless’ menu on the left of web management interface, then click 
‘Basic Settings’, and the following message will be displayed on your web browser: 
 
 
 
This wireless router can be work in 6 modes:   
 
a. Access...

54 
d. AP Bridge-Point to Multi-Point: Connect this router with up to four other wireless 
routers, to expand the scope of network. 
 
e. AP Bridge-WDS: Connect this router with up to four WDS-capable wireless 
routers, to expand the scope of network. 
 
f. Universal Repeater: The router can act as Station and AP at the same time. It can 
use Station function to connect to a Root AP and use AP function to service all 
wireless stations within its coverage. 
 
 
 
 
 
 
 
 
 
 
Please select a proper...

55 
 
 
Here are descriptions of every setup items: 
 
Band (2):    Please select the radio band from one of following options: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1
2 
3
4 
2.4 GHz (B)  2.4GHz band, only allows 802.11b wireless network 
client to connect this router (maximum transfer rate 
11Mbps). 
 
2.4 GHz (N)  2.4GHz band, only allows 802.11n wireless network 
client to connect this router (maximum transfer rate 
150Mbps). 
 
2.4 GHz (B+G)    2.4GHz band, only allows 802.11b and...

56 
 
 
 
 
 
 
 
SSID (3):    This is the name of wireless router. You can type any 
alphanumerical characters here, maximum 32 characters. 
SSID is used to identify your own wireless router from 
others when there are other wireless routers in the same 
area. Default SSID is ‘default’, it’s recommended to change 
default SSID value to the one which is meaningful to you, 
like myhome, office_room1, etc. 
 
Channel Number (4): Please select a channel from the dropdown list of ‘Channel 
Number’, available...

57 
2-7-1-2 Setup procedure for ‘Station-Infrastructure’ 
 
In this mode, you can connect the router to Ethernet device such us TV, Game player, 
HDD&DVD to enable the Ethernet device be a wireless station and join to a wireless 
network through an access point or AP router. 
 
 
 
Here are descriptions of every setup items: 
Band (2):  Select the band you want to use. 
 
SSID  (3):  This is the name of wireless network. You can type the SSID 
of the network you would like to connect here. 
 
Site Survey...

58 
2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’ 
 
In this mode, you can connect your wireless router with another, to combine two 
access points and expand the scope of wireless network, and all clients (wired only – 
AP will not accept wireless clients in this mode) of two wireless routers will think 
they’re on the same physical network. This function is very convenient when you 
need to connect two networks between two buildings. Here are instructions about 
how to connect two wireless...

59 
2-7-1-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’ 
 
In this mode, you can connect your wireless router with at least four wireless routers 
to expand the scope of wireless network, and all clients (wired only – AP will not 
accept wireless clients in this mode) of the wireless routers will think they’re on the 
same physical network. 
 
 
 
Here are descriptions of every setup items: 
 
Band (2):  Select the band you want to use, all the wireless routers 
must use the same setting....

60 
 
 
 
 
 
 
Here are descriptions of every setup items: 
Band (2):  Select the band you want to use, all the wireless routers 
must use the same setting. 
 
SSID (3):  Input the SSID of your wireless router, the setting should 
be the same with other wireless routers for the convenience 
of roaming. 
 
Channel  Select the channel you want to use, all the wireless 
Number (4):  routers must use the same setting. 
 
Associated Clients (5):  Click ‘Show Active Clients’ button, then an “Active Wireless...