Canyon Router CNP-WF514N1 User Manual

91 
 
 
There are many applications listed here. Please check the box of the special support 
for applications you need, and then click ‘Apply’ button and the following message 
will be displayed on your web browser: 
 
Please click ‘Continue’ to back to previous setup menu; to continue on other setup 
procedures, or click ‘Apply’ to reboot the router so the settings will take effect 
(Please wait for about 30 seconds while router is rebooting). 
 
If you want to reset all settings in this page back to...

92 
3-3 Firewall 
 
Excepting NAT, this router also provides firewall function to block malicious intruders 
from accessing your computers on local network. These functions include inbound 
attack prevention, and block outbound traffics, like block URLs which have 
pre-defined keywords. 
 
Please follow the following instructions to enable or disable firewall function: 
 
Please click ‘Firewall’ menu on the left of web management interface, and the 
following message will be displayed on your web...

93 
3-3-1 Access Control 
 
This function allows or denies computers with specific MAC address from connecting 
to the network; it can also allow or deny computers with specific IP address, 
protocol, or port. 
 
Please click ‘Firewall’ menu on the left of web management interface, then click 
‘Access Control’, and the following message will be displayed on your web browser: 
 
 
 
Here are descriptions of every setup items: 
 
 
Enable MAC        Check this box to enable MAC address based filtering,...

94 
Computer  Name  (3):  Pull down the menu and all the computers connected to the 
router will be listed here. You can easily to select the 
computer name without checking the IP address of the 
computer. 
 
Comment (4):    You can input any text here as the comment of this MAC 
address, like ‘ROOM 2A Computer’ or anything. You can 
input up to 16 alphanumerical characters here. This is 
optional and you can leave it blank, however, it’s 
recommended to use this field to write a comment for every 
MAC...

95 
 
IP  Filtering        All existing IP addresses in filtering table will be listed here. 
Table (12):         
 
Add  PC  (13):    Click this button to add a new IP address to IP filtering table, 
up to 20 IP addresses can be added. 
  Please refer to section 3-3-1-1 ‘Add PC’ below.   
 
Delete (14):        If you want to delete a specific IP address entry, check the 
    ‘select’ box of the IP address you want to delete, then click 
‘Delete Selected’ button. (You can select more than one IP...

96 
 
 
Here are descriptions of every setup items: 
 
Client PC        Please input any text to describe this IP 
Description (a):    address, up to 16 alphanumerical characters. 
 
Client PC IP      Please input the starting IP address in the left 
address  (b):    field, and input the end IP address in the right field to define 
a range of IP addresses, or just input the IP address in the 
left field to define a single IP address. 
 
a 
b 
c 
d 
e 
f  

97 
Client PC        Please check all services you want to allow or 
Service (c):    deny this IP address to use, you can check multiple 
services. 
 
Protocol (d):    If the service you need is not listed above, you can create a 
new service on your own. Please select TCP or UDP, if 
you’re not sure, please select ‘Both’. 
 
Port  Range  (e):    Please input the port range of new service here. If you want 
to specify port 80 to 90, please input ’80-90’; if you want to 
apply this rule on a single port,...

98 
 
 
Here are descriptions of every setup items: 
 
Enable URL        Check this box to enforce URL Blocking, 
Blocking (1):       uncheck it to disable URL Blocking. 
 
URL/Keyword (2):    Input the URL (host name or IP address of website, like 
http://www.blocked-site.com
 or http://11.22.33.44), or 
the keyword which is contained in URL (like pornography, 
cartoon, stock, or anything). 
 
Add (3):    Click ‘Add’ button to add the URL / keyword to the URL / 
Keyword filtering table. 
 
Reset (4):...

99 
Reset (8):    You can also click ‘Reset’ button to unselect all 
URL/Keywords. 
 
After you finish with all settings, please click ‘Apply’ (9) button, and the following 
message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on other setup 
procedures, or click ‘Apply’ to reboot the router so the settings will take effect 
(Please wait for about 30 seconds while router is rebooting). 
 
If you want to reset all settings in this page...

100 
 
Here are descriptions of every setup items: 
Ping of Death (1):    Ping of Death is a special packet, and it will cause certain 
computer to stop responding. Check this box and the router 
will filter this kind of packet out. 
 
Discard Ping        Ping is a common and useful tool to know the connection   
From WAN (2):    status of a specified remote network device, but some 
malicious intruder will try to fill your network bandwidth 
with a lot of PING request data packet, to make your 
internet...