Canyon Router CNP-WF514N1 User Manual

1 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CNP-WF514N1 
Wireless Broadband Router 
User Manual 
 
 
  

2 
Table of Contents 
 
CHAPTER I: INTRODUCTION 5 
1-1 SAFETY PRECAUTIONS 5 
1-2 PACKAGE CONTENTS 6 
1-3 HARDWARE OVERVIEW 7 
CHAPTER II: SYSTEM AND NETWORK SETUP 8 
2-1 BUILD NETWORK CONNECTION 8 
2-2 CONNECTING TO WIRELESS BROADBAND ROUTER BY WEB BROWSER 10 
2-2-1 WINDOWS 95/98/ME IP ADDRESS SETUP: 10 
2-2-2 WINDOWS 2000 IP ADDRESS SETUP: 11 
2-2-3 WINDOWS XP IP ADDRESS SETUP: 12 
2-2-4 WINDOWS VISTA IP ADDRESS SETUP: 13 
2-3 USING ‘QUICK SETUP’ 17 
2-3-1 SETUP PROCEDURE FOR ‘CABLE MODEM’: 20 
2-3-2...

3  2-6
 WIRED LAN CONFIGURATION 47 
2-6-1 LAN IP SECTION 48 
2-6-2 DHCP SERVER 49 
2-6-3 STATIC DHCP LEASES TABLE 50 
2-7 WIRELESS LAN CONFIGURATION 52 
2-7-1 BASIC WIRELESS SETTINGS 53 
2-7-2 ADVANCED WIRELESS SETTINGS 62 
2-7-3 WIRELESS SECURITY 65 
2-7-4 WIRELESS ACCESS CONTROL 70 
2-7-5 WI-FI PROTECTED SETUP (WPS) 73 
2-7-6 SECURITY TIPS FOR WIRELESS NETWORK 76 
CHAPTER III: ADVANCED FUNCTIONS 77 
3-1 QUALITY OF SERVICE (QOS) 77 
3-1-1 BASIC QOS SETTINGS 77 
3-1-2 ADD A NEW QOS RULE 79 
3-2 NETWORK...

4  3-6
 FIRMWARE UPGRADE 11 0 
3-7 SYSTEM RESET 111 
CHAPTER IV: APPENDIX 11 3 
4-1 HARDWARE SPECIFICATION 11 3 
4-2 TROUBLESHOOTING 11 4 
4-3 GLOSSARY 11 7  

5 
Thank you for purchasing CANYON CNP-WF514N1. We sincerely wish you to 
enjoy the wireless broadband router. It provides user an easy and stable high speed 
internet connection. It is also equipped with built-in NAT technology that acts as a 
firewall to protect the network from outside intrusions. Ultimately, the device is 
implemented with an IEEE 802.11b/g access point which is capable of wireless LAN 
network. To fully utilize the functions and features of CANYON CNP-WF514N1, 
please read through...

6 
1-2 Package Contents 
 
Product Image  Item Name 
 
CNP-WF514N1 Main Unit 
 Standing Base 
 
Power Adapter 
 
Warranty Card 
 
Quick Guide 
 
Documentation CD  

7 
1-3 Hardware Overview 
 
 
 
 
 
 
POWER ON Device is powered and switched on. 
WLAN 
ON 
OFF 
Flashing 
Wireless WPS function is enabled. 
Wireless network is disabled. 
Wireless LAN traffic is busy. 
WAN 
ON 
OFF 
Flashing 
WAN port is connected. 
WAN port is disconnected. 
WAN traffic is busy. 
1/2/3/4 ON 
OFF 
Flashing 
LAN port is connected. 
LAN port is disconnected. 
LAN traffic is busy. 
 
Antenna 3dBi dipole antenna transmits signals. 
Radio ON/OFF Activate/deactivate wireless functions....

8 
Chapter II: System and Network Setup 
 
2-1 Build network connection 
 
Please follow the following instruction to build the network connection between your 
new WIRELESS router and your computers, network devices: 
 
1. Connect your xDSL / cable modem to the WAN port of router by Ethernet cable.   
 
 
2. Connect all your computers, network devices (network-enabled consumer 
devices other than computers, like game console, or switch / hub) to the LAN 
port of the router. 
 
 
3. Connect the A/C power...

9 
 
 
4. Please check all LEDs on the front panel. ‘PWR’ LED should be steadily on, WAN 
and LAN LEDs should be on if the computer / network device connected to the 
respective port of the router is powered on and correctly connected. If PWD LED 
is not on, or any LED you expected is not on, please recheck the cabling, or jump 
to ‘4-2 Troubleshooting’ for possible reasons and solution.  

10 
2-2 Connecting to wireless broadband router by web browser 
 
  After the network connection is built, the next step you should do is setup the 
router with proper network parameters, so it can work properly in your network 
environment. 
  Before you can connect to the router and start configuration procedures, your 
computer must be able to get an IP address automatically (use dynamic IP address). 
If it’s set to use static IP address, or you’re unsure, please follow the following 
instructions to...