Canon scanner imageFORMULA DRX10C User Manual

3-11
Chapter 3   Basic Operation
Preparing the Document Eject Tray
The Eject Tray includes two Document Eject Guides, the 
Eject Tray Extension and Eject Paper Stopper, to be adjusted 
to match the length of your documents.
■Document Guides
Slide the document eject guides to match the width of your 
documents.
Hint
 The position of the document eject guides can be shifted to the 
left or right by holding one guide in place while moving the 
other.
 To reset the guides so that they are equidistant from...

3-12
Chapter 3   Basic Operation
4.Document Feeding Methods
Two document feeding methods are available: Continuous Feeding, which feeds documents automatically from the document tray 
by the pickup roller; and Manual Feeding, which requires one document at a time to be positioned manually for transport by the 
feed roller, while the pickup roller is disabled.
Selecting the Document Feeding Method
Continuous Feeding is the default feeding method, but 
Manual Feeding can be enabled by selecting Manual...

3-13
Chapter 3   Basic Operation
Continuous Manual Feeding Mode
Enable the Continuous Manual Feeding Mode from the 
User Mode when document pages do not separate well 
using Continuous Feeding.
IMPORTANT
When the Continuous Manual Feeding Mode is set to ON from 
the User Mode, make sure to disable it (set to OFF) when 
finished scanning. Otherwise, normal continuous feeding will be 
disabled the next time someone uses the scanner. 
Hint
For Manual Feeding, you must feed document one page at a 
time. For...

3-14
Chapter 3   Basic Operation
5.Scanning
Scanning operations can be controlled by a scanning application program such as the CapturePerfect 3.0 software included with the 
scanner, or directly from the control panel of the DR-X10C, using the Job Function.
This section describes the Job Function and provides an overview of CapturePerfect 3.0.
About the Job Function
The Job Function enables you to use the Job Registration Tool 
to register different jobs which can then be selected for 
scanning by...

3-15
Chapter 3   Basic Operation
CapturePerfect 3.0
CapturePerfect 3.0 is an ISIS-compatible application 
developed for Canon document scanners.
CapturePerfect 3.0 includes the following modes. Select the 
desired scan mode from the Scan menu to perform scanning. 
For more information on CapturePerfect 3.0, refer to the 
CapturePerfect 3.0 Operation Guide.
■Scanning with CapturePerfect
The following three scanning methods are available from 
the CapturePerfect Scan menu.Scan Batch to File
Documents are...

3-16
Chapter 3   Basic Operation
Scan To Presentation
This mode is convenient when a compact scanner is used 
in an environment such as a conference hall, where it is 
connected to a large display or projector. By setting 
CapturePerfect for full-screen display before scanning, 
scanned images are displayed at full size on the screen.
Hint
This is not usually practical for large scanners such as the DR-
X10C.
■Using CapturePerfect 3.0
This section describes how to start CapturePerfect 3.0 and 
scan...

3-17
Chapter 3   Basic Operation
4.Set the [Default Page Size].
IMPORTANT
If you select [Default] in the ISIS driver properties dialog box, 
that setting is applied here. 
5.Click [OK] to finish scanner selection.
6.From the [Scan] menu, select [Scanner Setting].
The Properties dialog box for the ISIS driver opens.
7.Set the scan settings.
Hint
For more information on specifying the scan settings, see “ISIS/
TWAIN Driver Settings Dialog Box” on p. 8-4.
8.From the [Scan] menu, select [Scan Batch to File]....

3-18
Chapter 3   Basic Operation
10.Place your document and click [Save] to start 
scanning.
IMPORTANT
You must load your documents as described below, depending 
on the specified Feed Option setting.
 If the [Standard Feeding] Feed Option is enabled, load your 
documents before scanning. When all of the documents have 
been scanned, the Continue Scanning dialog box appears.
 If the [Manual Feeding] Feed Option is enabled, the Bypass 
Mode key is lit and the Document Feed Tray is raised. You 
must insert...

3-19
Chapter 3   Basic Operation
6.Using Patchcode Sheets (Option)
When the optional patchcode decoder is installed, the DR-X10C supports Automatic File Separation by detecting patchcode sheets 
inserted within a document, and performs batch separation.
About Patchcode Sheets
Patchcode patterns are printed on the patchcode sheets used to 
automatically separate files. Patchcode pattern icons are 
registered in the following location when the ISIS/TWAIN 
driver is installed.
IMPORTANT
 Patchcode sheets...

3-20
Chapter 3   Basic Operation
How to Use Patchcode Sheets
This section describes how to use patchcode sheets with 
CapturePerfect 3.0.
1.Print the patchcode sheets on a printer.
IMPORTANT
 Print (at original size) PATCH T (A4) and PATCH II (A4) 
sheets on A4 paper, or PATCH T (LTR) and PATCH II (LTR) 
on LTR paper.
 The scanner may not recognize the patchcodes if they are 
enlarged or reduced.
2.Insert the patchcode sheet in front of the document 
that you want to save as a separate file before...