Canon scanner imageFORMULA DRX10C User Manual
Here you can view all the pages of manual Canon scanner imageFORMULA DRX10C User Manual. The Canon manuals for Scanner are available online for free. You can easily download all the documents as PDF.
Page 11
1-2 Chapter 1 Before You Start Using the Scanner 1.Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements. ●Provide adequate space around the scanner for operation, maintenance, and ventilation....
Page 12
1-3 Chapter 1 Before You Start Using the Scanner ●Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and remove it from the outlet. ●Keep the area around the power plug clear of objects so that the power cord can be disconnected easily in an emergency. ●If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. Moving the Scanner ●The scanner weights about 86 lbs (39...
Page 13
1-4 Chapter 1 Before You Start Using the Scanner ■Some parts can only be cleaned when the power is turned ON. In these cases, be careful to avoid electric shock. ■Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances. ■If the scanner makes strange noises, or gives off smoke, heat, or strange odors, or the scanner does not function or other abnormalities occur when you use the scanner,...
Page 14
1-5 Chapter 1 Before You Start Using the Scanner ■Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it. This may result in personal injury. Be extra careful of neckties and long hair. If anything becomes caught in the scanner, immediately disconnect the power cord to stop the scanner. ■Be careful when placing paper in the scanner and when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper. Disposal ●When disposing of...
Page 15
1-6 Chapter 1 Before You Start Using the Scanner 2.Features The main features of the DR-X10C are described below. Scanner Features ●Fast Document Feeding The scanner can scan up to 100 document sheets per minute of LTR/A4-size paper in black and white, grayscale, and color scanning modes. *Scanning conditions: LTR/A4 portrait, duplex, 200 dpi ●Variety of Scanning Modes The scanner is equipped with six scanning modes: Black and White, Error Diffusion, Advanced Text Enhancement, Advanced Text...
Page 16
1-7 Chapter 1 Before You Start Using the Scanner Detection Functions ●Auto Image Type Detection The scanner automatically detects whether documents are in black and white or color. ●Auto Paper Size Detection The document page size is detected before scanning. ●Skew Detection Function The scanner stops feeding when a skewed document is detected as it touches the edge of the feeder inlet. (See “Skew Detection Function” on p. 4-6.) ●Staple Detection The scanner stops feeding when it detects the...
Page 17
1-8 Chapter 1 Before You Start Using the Scanner ●Dropout and Color Enhancement Functions The scanner is equipped with drop-out and enhancement functions that enable you to specify one color (red, blue, or green) to be omitted (dropped out) or enhanced when scanning, respectively. ●Remove Binder Holes Erases the shadows that appear on scanned images form binding holes on the original document. ●Skip Blank Page The scanner scans both sides of a document and skips saving the image of any side it...
Page 18
1-9 Chapter 1 Before You Start Using the Scanner Other Functions ●Rapid Recovery System When this function is activated and a sensor detects a misfeed due to a paper jam or double feed, which causes feeding to stop, scanning pauses to allow you to correct the cause of the misfeed, after which scanning continues from the document page on which the abnormality was detected. (See “Clearing a Paper Jam or Double Feed Error” on p. 3-21.) *The Rapid Recovery System is effective when feeding stops as a...
Page 19
1-10 Chapter 1 Before You Start Using the Scanner 3.Names and Functions of Parts The names and functions of the DR-X10C parts are shown below. Front View, Feeder Inlet, and Eject Outlet aDocument Eject Tray Scanned documents are output here. (See p. 3-11.) bDocument Feed Tray Load documents to be scanned. (See p. 3-7.) cPower Switch Turns the scanner ON and OFF. (See p. 3-2.) dControl Panel (See p. 1-11.) eDocument Guides Adjust to match the width of documents, so that ejected documents stack neatly....
Page 20
1-11 Chapter 1 Before You Start Using the Scanner Rear View aUSB Connector (Type B) Connect the supplied USB cable here. (See p. 2-6.) bSCSI Connector (50-pin half-pitch D-sub receptacle) Connect the SCSI cable here. (See p. 2-7.) cDIP Switch (SCSI ID) Selects the scanner’s SCSI ID. (See p. 2-8.) dPower Connector Connect the supplied power cord here. (See p. 2-7.) eVentilation Holes (Exhaust Fan) Exhausts heat from inside the scanner. CAUTION Do not block the ventilation holes. Doing so could cause the...