Canon scanner imageFORMULA DRG1130 User Manual

1-12
Chapter 1   Before You Start Using the Scanner
Control Panel
(1) Display Panel
Displays the user mode, job info, messages, and counter.
(2) Count Clear Key
Clears and resets the counter on the display panel.
(3) Enter Key
Selects the user mode, and accepts settings.
(4)   Keys
Selects the user mode and job.
(5) Menu Key
Displays the user mode. (See p. 4-4.)
(6) Job Key
Selects jobs. (See p. 3-13.)
(7) Count Only Key
Feeds and counts the number of document pages. (See 
p. 4-2.)
(8) Separation Off...

Chapter 2   Setup1. Setup Procedures ............................................ 2-2
2. Installation Requirements ................................ 2-3
3. Software Installation ........................................ 2-4
4. Connecting the Scanner to the Computer ....... 2-6Interface Connector Locations ..............................2-6
Connecting the Scanner to the Computer .............2-65. Turning the Power ON ..................................... 2-8Turning Off the Power...

2-2
Chapter 2   Setup
1.
Setup Procedures
Perform the following setup procedures to prepare the scanner for use.
Step 1: Confirm the installation requirements. (See p. 2-3)
Step 2: Install the Software. (See p. 2-4)
Step 3: Connect the scanner to the computer. (See p. 2-6)
Step 4: Turn the power ON (Scanner recognition). (See p. 2-8) 

2-3
Chapter 2   Setup
2.
Installation Requirements
The following system requirements are recommended for optimal use of this scanner.■Computer
 CPU: Intel Core i3 2.13 GHz or faster
 Memory: 4 GB or more
 Hard disk: 3 GB or more available space required for 
installation of all software
 USB interface: Hi-Speed USB 2.0
 Monitor: Resolution of 1024 x 768 (XGA) or better 
recommended.
 Optical drive: Drive capable of reading DVDs.
■Operating system
 Microsoft Windows XP Service Pack 3 or later
 Microsoft...

2-4
Chapter 2   Setup
3.
Software Installation
This section describes how to install the software.
 CapturePerfect 3.1
This is a scanning application that is bundled with the 
scanner and other Canon DR series scanners.
 Scanner Driver
This is the scanner driver for this product.
IMPORTANT
Install the software before connecting the scanner to the computer.
• Log on to Windows as an Administrator.
• Close all other applications before installing the software.1.
Insert the Setup Disc into the disc drive of...

2-5
Chapter 2   Setup
4.
Follow the instructions on the screen to complete 
installation.
Hint
Installation of EMC Cloud Capture FunctionEMC Captiva Cloud Runtime provides a component that 
enables the use of web-based applications. 
Be sure to install the component only when using a 
compatible application that supports the function.
5.
Click [Exit] to finish installing the software.
Hint
For Windows 8
Depending on the system environment, the web browser may 
start in full screen during installation. If...

2-6
Chapter 2   Setup
4.
Connecting the Scanner to the Computer
Use a USB port to connect the device to the PC. Interface Connector LocationsThe USB connector is located on the scanner as shown below.
IMPORTANT
• Use only the supplied power cord.
• The scanner and computer should both be turned OFF when 
making connections. 
Connecting the Scanner to the ComputerTo connect to the computer, follow the procedure for the 
intended connection method.■Using a USB Connection1.
Connect the supplied power cord...

2-7
Chapter 2   Setup
3.
Use the supplied USB cable to connect the scanner 
to the computer.
Connect the square plug (Type B) of the USB cable to the 
scanner. Connect the flat plug (Type A) of the USB cable 
to the computer.
Type A
Type B 

2-8
Chapter 2   Setup
5.
Turning the Power ON
The power of the scanner can be turned ON and OFF with the power button on the front of the scanner.1.
Make sure that the scanner and computer are 
connected properly with the supplied USB cable.
2.
Press the power switch.HintWhen the scanner is turned on for the first time, the balloon 
message shown below appears on the Windows task bar. If you 
wait a while, automatic scanner recognition will end and the 
scanner will become ready to use.
Turning Off the...

Chapter 3   Basic Operation
1. Documents....................................................... 3-2Acceptable Documents .........................................3-2
Long Document Mode Setting...............................3-32. Document Feed and Eject Trays ..................... 3-5Preparing the Document Feed Tray ......................3-5
Adjusting the Document Guides............................3-7
Preparing the Document Eject Tray ......................3-93. Document Feeding...