Canon scanner imageFORMULA DRG1130 User Manual

3-12
Chapter 3   Basic Operation
4.
Press [Enter].
The current setting is indicated by blinking square brackets 
[ ].
5.
Press the [ ] or [ ] key and press [Enter] to accept 
the selection.
6.
Press the Stop key to exit the User Mode.
Enter Key 

3-13
Chapter 3   Basic Operation
4.
Scanning
Scanning operations can be controlled by a scanning application program such as the CapturePerfect 3.1 software included with the 
scanner, or directly from the control panel of the DR-G1130/G1100, using the Job Function.
This section describes the Job Function and provides an overview of CapturePerfect 3.1.About the Job FunctionThe Job Function enables you to use the Job Registration Tool 
to register different jobs which can then be selected for 
scanning by...

3-14
Chapter 3   Basic Operation
CapturePerfect 3.1CapturePerfect 3.1 is an ISIS-compatible application 
developed for Canon document scanners.
CapturePerfect 3.1 includes scan modes described in this 
section. Select the desired scan mode from the Scan menu to 
perform scanning. For more information on CapturePerfect 
3.1, refer to the CapturePerfect 3.1 Operation Guide.
■Scanning with CapturePerfect
The following three scanning methods are available from 
the CapturePerfect 3.1 Scan menu.
Scan Batch to...

3-15
Chapter 3   Basic Operation
Select Job
The scanning conditions and scan mode (Scan Batch to 
File, Scan Batch to Printer, or Scan Batch to Mail) are 
registered in advance as a job. The scan job can then be 
performed in two steps: (1) select the registered job from 
the toolbar ➔ (2) click [Scan Job].
Hint
The following two scan jobs are already registered and up to 99 
additional jobs can be registered.
• Color Document
Scan the document using 24-bit color, simplex, at 300 dpi 
resolution, and...

3-16
Chapter 3   Basic Operation
2.
From the [Scan] menu, select [Select Scanner].
The [Select Scanner] dialog box opens.
3.
Select [CANON DR-XXXX] and click [Settings]. 
(XXXX varies depending on the model you are using)
IMPORTANT
If [CANON DR-XXXX] is not displayed in the list of scanners, 
you must re-install the ISIS/TWAIN driver.
4.
Select the default page size and click [OK].
IMPORTANT
If you select [Default] in the ISIS driver properties dialog box, 
that setting is applied here. 
5.
Click [OK] to...

3-17
Chapter 3   Basic Operation
The [Scan Batch to File] dialog box opens
9.
Specify the file name and the file type for saving the 
image data.
For details on other settings in the [Scan Batch to File] 
dialog box, refer to the CapturePerfect 3.1 Operation 
Guide.
10.
Place your document and click [Save] to start 
scanning.
IMPORTANT
You must load your documents as described below, depending 
on the specified Feed Option setting.
• If the [Standard Feeding] Feed Option is enabled, load your 
documents...

3-18
Chapter 3   Basic Operation
11.
Verify that a document is loaded and click either 
[Continue Scanning] or [Stop Scanning].
12.
When scanning is complete, select [Exit] from the 
[File] menu to quit CapturePerfect 3.1. 

3-19
Chapter 3   Basic Operation
5.
Using Patchcode Sheets (Option)
When the optional patchcode decoder is installed, the DR-G1130/G1100 supports Automatic File Separation by detecting 
patchcode sheets inserted within a document, and performs batch separation.About Patchcode SheetsPatchcode patterns are printed on the patchcode sheets used to 
automatically separate files. Patchcode pattern icons are 
registered in the following location when the ISIS/TWAIN 
driver is installed.
Hint
In Windows 8, the...

3-20
Chapter 3   Basic Operation
■Patchcode Pattern Function
There are two types of patchcodes, and their function 
changes according to their pattern.
PATCH TWhen the scanner recognizes this patchcode printed on a 
patchcode sheet, it creates a separate file for the document 
that comes after the patchcode sheet. The image of this 
sheet is saved or not saved, depending on the application’s 
settings.
PATCH IIWhen the scanner recognizes this patchcode printed on a 
patchcode sheet, it creates a separate...

3-21
Chapter 3   Basic Operation
IMPORTANT
If the patchcode decoder is not installed, the [Patchcode] batch 
separation setting is not displayed.
4.
Perform [Scan Batch to File].
5.
Set the [Type of batch separation] setting to [Scan, 
Continue Scanning] or [Skip, Continue Scanning].
Hint
• If [Scan, Continue Scanning] is selected or if the patchcode is 
PATCH ll type, the patchcode sheet image is also saved and 
scanning continues.
• If [Skip, Continue Scanning] is selected and the PATCH T 
pattern is...