Canon scanner imageFORMULA DRG1130 User Manual

1-2
Chapter 1   Before You Start Using the Scanner
1.
Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.Installation LocationThe performance of this scanner is affected by the 
environment in which it is installed. Make sure that the 
location where the scanner is installed meets the following 
environmental requirements.
●Provide adequate space around the scanner for 
operation, maintenance, and ventilation....

1-3
Chapter 1   Before You Start Using the Scanner
●Do not use the power cord while it is coiled.
●Do not pull directly on the power cord. When 
disconnecting the power cord, grasp the plug and 
remove it from the outlet.
●Keep the area around the power plug clear of 
objects so that the power cord can be 
disconnected easily in an emergency.
●If you have any questions regarding the power 
supply, contact your local authorized Canon dealer 
or service representative for further information.
Moving the...

1-4
Chapter 1   Before You Start Using the Scanner
■Never try to take the scanner apart or modify it in 
any way, as this is dangerous and may lead to a 
fire or electric shock.
■Do not use flammable aerosol sprays products 
near the scanner.
■When cleaning the scanner, turn the power switch 
OFF and disconnect the power plug from the 
power supply.
■Clean the scanner using a slightly dampened cloth 
which has been well wrung out. Never use alcohol, 
benzene, paint thinner, or any other flammable...

1-5
Chapter 1   Before You Start Using the Scanner
■Do not wear loose clothing or jewelry that may get 
caught in the scanner while you are using it. This 
may result in personal injury. Be extra careful of 
neckties and long hair. If anything becomes caught 
in the scanner, immediately disconnect the power 
cord to stop the scanner.
■Be careful when placing paper in the scanner and 
when removing jammed paper. It is possible to cut 
your hand on the edge of a sheet of paper.
■The part where the seal is...

1-6
Chapter 1   Before You Start Using the Scanner
2.
Features
The main features of the DR-G1130/G1100 are described below.
Scanner Features
●Variety of Scanning Modes
The scanner is equipped with six scanning modes: 
Black and White, Error Diffusion, Advanced Text 
Enhancement, Advanced Text Enhancement II, 256-
level Gray, and 24-bit Color.*Advanced Text Enhancement can clarify scanned text by 
processing background or foreground colors.●Fast Document Feeding
The scanner can scan up to 100 document...

1-7
Chapter 1   Before You Start Using the Scanner
Detection Functions
●Color Document Auto Detection
The scanner automatically detects whether documents 
are in color, grayscale, or black and white.
●Auto Paper Size Detection
The document page size is detected before scanning.
●Skew Detection
The scanner stops feeding when a skewed document is 
detected as it touches the edge of the feeder inlet.
●Staple Detection
The scanner stops feeding when it detects the presence 
of stapled documents. (See “Staple...

1-8
Chapter 1   Before You Start Using the Scanner
●Deskew
The scanner straightens an image when it recognizes 
from the image that the document page was fed askew.
●Dropout and Color Enhancement
The scanner is equipped with color drop-out and 
enhancement functions that enable you to specify one 
color (red, blue, or green) to be omitted (dropped out) or 
enhanced when scanning, respectively.
●Remove Binder Holes
Erases the shadows that appear on scanned images form 
binding holes on the original...

1-9
Chapter 1   Before You Start Using the Scanner
●Making text or lines bold
If any text or lines are unclear, this scanner has a 
function for scanning and making them bolder.
●Background smoothing
This processes the background in a scanned image to 
make it look smoother. It can be used when [Detect 
automatically], [256-level Gray], or [24-bit Color] is 
selected in [Color Mode] on the [Basic] tab sheet.
Other Functions●Rapid Recovery System
When this function is activated and a sensor detects a...

1-10
Chapter 1   Before You Start Using the Scanner
3.
Names and Functions of Parts
The names and functions of the DR-G1130/G1100 parts are shown below.Front View, Feeder Inlet, and Eject Outlet
(1) Upper Unit
Open when cleaning the rollers or paper jams. (See p. 3-22.)
(2) Imprinter Cover
Open when replacing the ink cartridge in the optional 
imprinter or when cleaning the imprinter. (See p. 5-16.)
(3) Document Eject Tray
Scanned documents are output here. (See p. 3-9.)
(4) Control Panel (See p. 1-12.)...

1-11
Chapter 1   Before You Start Using the Scanner
Rear View
(1) Ventilation Holes (Exhaust Fan)
Exhausts heat from inside the scanner.
(2) Power Connector
Connect the supplied power cord here. (See p. 2-6.)
(3) USB Connector (Type B)
Connect the supplied USB cable here. (See p. 2-7.)
CAUTION
Do not block the ventilation holes. Doing so could cause the 
scanner to overheat, creating a fire hazard.
(1) (2)(3)