Home > Canon > Printer > Canon printer PIXMA MG2920 User Manual

Canon printer PIXMA MG2920 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG2920 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 735
    							About PictBridge (Wireless LAN) Print SettingsSettings on a PictBridge (Wireless LAN) Compliant DeviceThis section describes the PictBridge (Wireless LAN) function of the machine. For the print settings on a
    PictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instruction
    manual.
    Note
    •
    In the following description, names of setting items are given according to those used in Canon-brand PictBridge (Wireless LAN) compliant devices. Setting item names may be different depending on the
    brand or model of your device.
    •
    Some setting items explained below may not be available on some devices. When you cannot change print settings on a device, the printer prints images as follows:
    Paper size: 4" x 6"/ 10 x 15 cm
    Paper type: Photo
    Layout: 1-up, Bordered
    Date/File No. Print: Not printed
    The following settings can be used when printing from a PictBridge (Wireless LAN) compliant device.
    Paper size4" x 6"/ 10 x 15 cm, 5" x 7"*, A4, 8.5" x 11"(Letter) * Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices.(May not be selected depending on the device.)Paper type•Default: Photo Paper Plus Glossy II PP-201•
    Photo:
    Photo Paper Plus Glossy II PP-201
    •
    Plain:
    A4/Letter sized plain paper
    LayoutDefault (Bordered), Index, Bordered*
    * With a Canon brand PictBridge (Wireless LAN) compliant device, selecting items with "i" mark allows you to print shooting info (Exif Data) on the margins of the specified data (1-up). (May not
    be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.)Print date & file
    no.Default (Off: No printing), Date, File No., Both, OffTrimmingDefault (Off: No trimming), On (follow the camera's setting), Off
    401 
    						
    							Copying
    Making Copies Basic
     
    Switching the Page Size between A4 andLetter
    402 
    						
    							Making CopiesLoad the original on the platen glass to copy.1.
    Make sure that the machine is turned on.
    2.
    Load A4 or Letter-sized plain paper.
    3.
    Load the original on the platen glass.
    Note
    •
    You can switch the size of paper loaded in the rear tray between A4 and Letter.
    Switching the Page Size between A4 and Letter
    4.
    Press the  Color button for color copying, or the  Black button for black & white copying.
    The machine starts copying. Remove the original on the platen glass after copying is complete.
    To make multiple copies Press the  Color button or the  Black button repeatedly according to the number of copies you want.
    Press the same button ( Color button or  Black button) as the one which you previously pressed.
    Important
    •
    Do not open the document cover or remove the original from the platen glass until scanning is
    completed.
    While the machine is scanning the original, the  ON lamp keeps flashing.
    •
    If the original covers the whole page, area (B) in the figure below cannot be printed.
    (A) The direction in which the paper is ejected
    (B) Unprintable area
    For details on the printable area: For A4 sized paper:
    Other Sizes than Letter, Legal, Envelopes
    For Letter-sized paper:
    Letter, Legal
    403 
    						
    							Note•
    To cancel copying, press the Stop button.
    •
    To set the print quality to "Draft" (speed priority)
    You can set the print quality to "Draft" (speed priority) following the procedure below.
    1.
    Press and hold down the  Color or Black  button for 2 or more seconds in step 4.
    The  ON lamp flashes once.
    2.
    Release the button.
    The machine starts copying.
    When the print quality is set to "Draft", print speed is given priority over quality. To give priority to
    quality, press the  Color or Black  button for less than 2 seconds to copy in the print quality "Standard".
    404 
    						
    							Switching the Page Size between A4 and LetterThis setting is useful if you usually load Letter-sized paper in the rear tray.1.
    Make sure that the machine is turned on.
    2.
    Press and hold the  Stop button until the  Alarm lamp flashes 10 times.
    3.
    Release the  Stop button.
    The  ON lamp starts flashing instead of remaining lit.
    4.
    Press the  Black button to select A4, or the  Color button to select Letter.
    The  ON lamp stops flashing and remains lit, then the paper size is changed.
    Note
    •
    When you switch the page size to A4 or Letter, load paper of the selected size.
    When the page size is set to A4, load A4 plain paper.
    When the page size is set to Letter, load Letter-sized plain paper.
    •
    This setting is retained even if the machine is turned off.
    405 
    						
    							Scanning
    Scanning from a Computer
    406 
    						
    							Scanning from a Computer
    Scanning with IJ Scan Utility
    Scanning with Application Software that You are Using (ScanGear)
    Useful Information on Scanning
    IJ Network Scanner Selector EX Menu and Setting Screen
    Other Scanning Methods
    Placing Items (When Scanning from a Computer)
    Network Scan Settings
    407 
    						
    							Scanning with IJ Scan Utility
    What Is IJ Scan Utility (Scanner Software)?
    Starting IJ Scan Utility
    Easy Scanning with Auto Scan Basic
    Scanning Documents
    Scanning Photos
    Scanning with Favorite Settings
    Scanning Items Larger than the Platen (Image Stitch)
    Scanning Multiple Items at One Time
    Saving after Checking Scan Results
    Sending Scanned Images via E-mail
    Extracting Text from Scanned Images (OCR)
    IJ Scan Utility Screens
    408 
    						
    							What Is IJ Scan Utility (Scanner Software)?IJ Scan Utility is an application that allows you to easily scan documents, photos, etc.
    You can complete from scanning to saving at one time by simply clicking the corresponding icon in the IJ
    Scan Utility main screen.
    What You Can Do with IJ Scan Utility
    Scan Easily according to Purposes
    You can scan by simply clicking an icon such as  Auto to scan easily,  Document to sharpen text in a
    document or magazine for better readability, or  Photo to scan with settings suitable for photos,
    according to the item type or your purpose.
    Note
    •
    Refer to "IJ Scan Utility Main Screen " for details on the IJ Scan Utility main screen.
    Save Scanned Images Automatically Scanned images are automatically saved in a preset folder. You can change the folder as required.
    Note
    •
    The default save folders are as follows.
    •
    Windows 8.1:  Documents folder
    •
    Windows 8:  My Documents  folder
    •
    Windows 7: My Documents  folder
    •
    Windows Vista:  Documents folder
    •
    Windows XP:  My Documents  folder
    •
    Refer to "Settings Dialog Box " for how to specify a folder.
    Integrate with Applications You can utilize scanned images through integration with other applications; display scanned images in
    your favorite application, attach them to e-mails, extract text from images, and more.
    409 
    						
    							Important
    •
    Some functions are available only when My Image Garden is installed.
    Note
    •
    Refer to "Settings Dialog Box" for how to set the applications to integrate with.
    410 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG2920 User Manual