Canon printer imageCLASS MF247dw User Manual
Have a look at the manual Canon printer imageCLASS MF247dw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Set the Auto Reset time
The screen displayed after the Auto Reset is performed can be selected in .
Function After Auto Reset
Select whether to return the display to the default screen after the Auto Reset is performed. If is selected, the main screen of the function selected in is displayed (
DefaultScreenafterStartup/Restoration(P.486) ). If is selected, the display returns to the main
screen of the function that was selected.
Default Function
Selected Function
Select or
Auto Oxine Time
If a key has not been pressed for a speci4ed period of time after the screen below is displayed (the machine is set
online for scanning), the machine automatically becomes oxine. Specify the time period at which the machine
becomes oxine. You can also set the machine to remain online.
0 (The machine remains online.)
1 to 5
to 60 (min.)
Set the time period
Setting Menu List
493
CommonSettings
1469-090
All the settings about the operation of the paper drawer and the paper feed
method are listed with short descriptions. Default settings are marked with a dagger (
).
Switch Paper Feed Method
Specify this setting when you print a document on paper with logos. To print on paper with logos, you need to change how the paper loaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing.
However, if you change the setting to , you can just load the paper face down for both 1- and 2- sided printing. For more information, see
LoadingPreprintedPaper(P.54) .
Multi-PurposeTray
Speed Priority
Print Side Priority
Drawer1 Speed Priority
Print Side Priority
Select the paper source Select
or
PaperSources
Select the paper source that you want to change the setting for.
When using paper that has been preprinted with a logo, you need to change how it is facing when you perform 1-sided and 2-sided printing.
We recommend selecting if you do not need to consider which side to print on.
Setting Menu List
494
To print on a speci4c side of paper, you do not need to 5ip over paper in the paper source whether 1- or 2- sided printing is selected. If is set for a paper source that is loaded with paper you cannot use for 2-sided printing ( Paper (P.650) ), is applied to the paper source instead. In this case, you need to load the paper in the same way as when is selected ( Loading Preprinted Paper(P.54) ). 1-sided printing speed may be slower when is selected. Setting Menu List 495
CopySettings 1469-091 All the settings about the copy are listed with short descriptions. Default settings are marked with a dagger ( ).Asterisks( * ) Settings marked with " *1 " are only available for the MF249dw / MF247dw. Settings marked with " *2 " are only available for the MF249dw. ChangeDefaultSettings(P.496) CorrectDensity(P.497) InitializeDefaultSettings(P.497) Change Default Settings You can change the factory default settings about copy. The selected settings are used as the default settings of the copy function. ChangingDefaultSettings(P.100) NumberofCopies 1 to 999 Density -4 to 0 to +4 Auto Density OriginalType Text Text/Photo (High Speed) Text/Photo Photo 2-Sided *1 Off 1->2-Sided 2->2-Sided *2 2->1-Sided *2 Original/Finishing Type CopyRatio Custom Ratio 100% (Direct) Setting Menu List 496
400% (Max)
200%
129% STMT->LTR
78% LGL->LTR
64% LTR->STMT
50%
25% (Min)
Non1 Off
2 on 1
4 on 1
ID Card Copy
Select Layout
Collate Off
On
Sharpness Seven Levels
Correct Density
Specify the initial copy density. You can also change the copy density temporarily.
AdjustingDensity(P.88)
-4 to 0 to +4
Adjust the density
Initialize Default Settings
Select this option to restore the default copy settings.
Setting Menu List
497
FaxSettings 1469-092 All the settings about the fax are listed with short descriptions. Default settings are marked with a dagger ( ). IfascreenforenteringaPINisdisplayed Enter the PIN with the numeric keys and tap . SettingtheSystemManagerPIN(P.397) Asterisks( * ) Settings marked with " *1 " are only available for the MF249dw. Settings marked with " *2 " are only available for the MF249dw / MF247dw. Settings marked with " *3 " are unavailable depending on the country or region of purchase. BasicSettings(P.498) TXFunctionSettings(P.499) RXFunctionSettings(P.503) RXPrintSettings(P.505) ForwardingSettings(P.507) FaxSetupGuide(P.508) Basic Settings Specify the basic settings for using the machine as a fax device. RegisterUnitTelephoneNumber Register the fax number for the machine. RegisteringtheFaxNumberandUnitName(P.108) SelectLineType Select the telephone line type used for fax transmission. ConnectingtheTelephoneLine(P.112) Pulse Tone PublicLineConnection When the fax receive mode is , an external telephone may not ring or a call may not be dialable. In this instance, specify or . Direct Adapter 1 Adapter 2Setting Menu List 498
Select connection
type
Off-HookAlarm
Select whether the machine makes an alert sound when the handset of a telephone connected to the machine
is not properly set on the cradle. You can also adjust the volume of the alert sound.
0 to 5
Select the volume of the alert
sound
CommunicationManagementSettings
Adjust the communication start speed in descending order from "33600 bps." This adjustment should be made
when it takes a long time to start sending or receiving a fax due to a poor telephone line connection.
TXStartSpeed
33600 bps
14400 bps
9600 bps
7200 bps
4800 bps
2400 bps
RXStartSpeed 33600 bps
14400 bps
9600 bps
7200 bps
4800 bps
2400 bps
Select a
communication start speed
TX Function Settings
Specify settings for sending faxes.
Setting Menu List
499
ChangeDefaultSettings
Specify settings used for sending faxes. The selected settings are used as the default settings when scanningdocuments.
ChangingDefaultSettings(P.139)
Resolution
200 x 100 dpi (Normal)
200 x 200 dpi (Fine)
200 x 200 dpi (Photo)
200 x 400 dpi (6uper4ne)
Density Nine Levels
2-SidedOriginal *1
Off
Book Type
Calendar Type
Sharpness Seven Levels
RegisterUnitName
Register the name of a company or person. RegisteringtheFaxNumberandUnitName(P.108)
The registered name is sent as sender information to the destination.
TXTerminalID(P.502)
ECMTX
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
errors on received faxes, see
ECMRX(P.503) .
Off
On ECM must be enabled on both the machine and the other fax device because error checks are
performed on both the sending and receiving devices.
Even when ECM is enabled, errors may occur due to telephone line conditions.
It may take a longer time than usual to process data when ECM is enabled because the error checks
and corrections are performed while the data is transmitted.
SetPauseTime
For example, when you make calls by dialing "0 - (pause) - (telephone number)", 0 is dialed
4rst and then a few
seconds later, the telephone number. When sending faxes overseas, you need to specify destinations by dialing
"(international access code) - (country code) - (area code) - (fax number)" but consecutive numbers that are
Setting Menu List
500
input without pauses may not be recognized correctly. In this case, try adding a pause after the internationalaccess code or the fax number. If the code or the number is still not recognized correctly, change the duration of the pause. For instructions on how to enter a pause, see step 3 on
SendingFaxes(P.114) .
1 to 2 to 15 (sec.)
Specify the duration of
pause
AutoRedial
Specify settings for Auto Redial, a function that automatically redials the fax number after several minutes if the 4rst attempt fails because the line is busy. You can specify how many times the machine redials and the interval
between redials.
Off
On
Number of Times to Redial
1 to 2
to 10 (times)
Redial Interval 2
to 99 (min.)
Redial When Error Occurs Off
On
Specify the settings
6peci4es how many times the machine redials. Use
/ or the numeric keys to enter a number, and tap
.
6peci4es the interval between redials. Use
/ or the numeric keys to enter a number for the interval,
and tap .
Setting Menu List
501
6peci4es whether to redial when a transmission error occurs. Select or .
TXTerminalID
Specify settings for adding the sender information, including the fax number and the name of the machine, to
the fax header. The recipient can check who sent the fax by looking at the added information.
Off
On
Print Position
Inside Image Area
Outside Image Area
Mark Number as
FAX
TEL
Specify the
settings
6peci4es the position to print the terminal ID information in the sent fax. Select to print
the information inside the image area, or to print the information outside the image area.
Adds the "FAX" or "TEL" mark in front of the fax number registered for the machine (
RegisteringtheFax
NumberandUnitName(P.108) ). Select to indicate that the noti4ed number is a telephone number.
CheckDialToneBeforeSending *3
Select whether to check the dial tone before a fax number is dialed.
Off
OnSetting Menu List
502