Canon printer imageCLASS MF247dw User Manual
Have a look at the manual Canon printer imageCLASS MF247dw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 377
If the above screen is not displayed, see Displayingthe[SoftwarePrograms/ManualsSetup@
Screen(P.670) .
If [AutoPlay] is displayed, click [Run MInst.exe].3Click [Start] for [Send Function Setting Tool].4Click [Next].
If you want to view "Send Setting Guide," click [How to Set].
Ifthescreenbelowappears
Click [Yes].
5Select the machine from [Device List] and click [Next].
Ifthemachineisnotdisplayedin[DeviceList@
Click [Search Again]. If the problem persists, click...](http://img.usermanuals.tech/thumb/14/970/w64_printer-imageclass-mf247dw-1478271361_d-376.png "Page 377
If the above screen is not displayed, see Displayingthe[SoftwarePrograms/ManualsSetup@
Screen(P.670) .
If [AutoPlay] is displayed, click [Run MInst.exe].3Click [Start] for [Send Function Setting Tool].4Click [Next].
If you want to view \"Send Setting Guide,\" click [How to Set].
Ifthescreenbelowappears
Click [Yes].
5Select the machine from [Device List] and click [Next].
Ifthemachineisnotdisplayedin[DeviceList@
Click [Search Again]. If the problem persists, click...")
![Page 378
If the logon screen is displayed, enter the appropriate PIN, and click [Logon].
3Click[StoretoSharedFolderSettings@.
If the screen prompting you to enter the Address Book PIN is displayed, enter the PIN for the Address Book,
and click [OK].
SettingaPINforAddressBook(P.415)
4Specifytherequiredsettings.
[Registration@
[One-touchSpeedDialNumber@With the Send Function Setting Tool, you can register a shared folder for saving scanned documents into in the Address Book. Select a number...](http://img.usermanuals.tech/thumb/14/970/w64_printer-imageclass-mf247dw-1478271361_d-377.png "Page 378
If the logon screen is displayed, enter the appropriate PIN, and click [Logon].
3Click[StoretoSharedFolderSettings@.
If the screen prompting you to enter the Address Book PIN is displayed, enter the PIN for the Address Book,
and click [OK].
SettingaPINforAddressBook(P.415)
4Specifytherequiredsettings.
[Registration@
[One-touchSpeedDialNumber@With the Send Function Setting Tool, you can register a shared folder for saving scanned documents into in the Address Book. Select a number...")
![Page 386
Con4gurLngIPv4DNS1Click [Edit] in [IPv4 Settings].2Con4gure IPv4 DNS settings.
Settable options vary depending on the machine model.
[DNSSettings@
[PrimaryDNSServerAddress@Enter the IP address of a DNS server.
[SecondaryDNSServerAddress@
Enter the IP address of a secondary DNS server, if any.
[HostName@
Enter up to 47 alphanumeric characters for the host name of the machine that is to be registered to
the DNS server.
[DomainName@
Enter up to 47 alphanumeric characters for the name of the...](http://img.usermanuals.tech/thumb/14/970/w64_printer-imageclass-mf247dw-1478271361_d-385.png "Page 386
Con4gurLngIPv4DNS1Click [Edit] in [IPv4 Settings].2Con4gure IPv4 DNS settings.
Settable options vary depending on the machine model.
[DNSSettings@
[PrimaryDNSServerAddress@Enter the IP address of a DNS server.
[SecondaryDNSServerAddress@
Enter the IP address of a secondary DNS server, if any.
[HostName@
Enter up to 47 alphanumeric characters for the host name of the machine that is to be registered to
the DNS server.
[DomainName@
Enter up to 47 alphanumeric characters for the name of the...")
Con4gurLngEthernetSettings 1469-072 Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication mode (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). In general, the machine can be used without changing the defaults ( EthernetDriverSettings(P.482) ), but you can change these settings to suit your network environment. 1TapintheScreen.2Tap. If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap . Setting theSystemManagerPIN(P.397) 3Select.4Selectwhetherto con4gureEthernetsettingsautomaticallyormanually. Con4gurLng Ethernetsettingsautomatically Tap . The machine detects and automatically sets the communication mode and the Ethernet type that can be used. Con4gurLng Ethernetsettingsmanually 1Tap .2Select the communication mode. Tap tap or . Alternately sends and receives communication data. Select when the machine is connected to anetworking device using half duplex. Simultaneously sends and receives communication data. Use this setting for most environments. Network 373
3Select the Ethernet type. Tap tap or . 4Tap . LINKS ChangingtheMaximumTransmissionUnit(P.375) SettingaWaitTimeforConnectingtoaNetwork(P.376) Network 374
ChangingtheMaximumTransmissionUnit 1469-073 In most Ethernet networks, the maximum size of a packet that can be sent is 1500 bytes. A packet refers to a chunk of data into which the original data is divided before being sent. The maximum transmission unit (MTU) may vary on each network. Change the settings of the machine as necessary. For more information, contact your Network Administrator. 1TapintheScreen.2Tap. If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap . Setting theSystemManagerPIN(P.397) 3Select.4SelecttheMTU. LINKS Con4gurLng EthernetSettings(P.373) SettingaWaitTimeforConnectingtoaNetwork(P.376) Network 375
SettingaWaitTimeforConnectingtoaNetwork 1469-074 When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a mechanism to prevent packets from looping. One effective solution is to de4ne the role of each switch port. However, communication may still be disrupted for several tens of seconds immediately after you change the way that network devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the network. 1TapintheScreen.2Tap. If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap . Setting theSystemManagerPIN(P.397) 3Tap.4Enterthewaittimeinseconds,andtap. Use / or the numeric keys to enter the time. LINKS Con4gurLng EthernetSettings(P.373) ChangingtheMaximumTransmissionUnit(P.375) Network 376
Con4gurLngDNS 1469-075 DNS (Domain Name System) provides a service for name resolution that associates a host (or domain) name with an IP address. Con4gure the DNS, mDNS, or DHCP option settings as necessary. Note that the procedures for con4guring DNS are different for IPv4 and IPv6. 1StarttheRemoteUIandlogoninSystemManagerMode.StartingRemote UI(P.450)2Click[Settings/[email protected][NetworkSettings@[TCP/IP[email protected]4gure DNSsettings.Network 377
Con4gurLngIPv4DNS1Click [Edit] in [IPv4 Settings].2Con4gure IPv4 DNS settings. Settable options vary depending on the machine model. [DNSSettings@ [PrimaryDNSServerAddress@Enter the IP address of a DNS server. [SecondaryDNSServerAddress@ Enter the IP address of a secondary DNS server, if any. [HostName@ Enter up to 47 alphanumeric characters for the host name of the machine that is to be registered to the DNS server. [DomainName@ Enter up to 47 alphanumeric characters for the name of the domain the machine belongs to, such as "example.com." [DNSDynamicUpdate@ Select the check box to dynamically update the DNS records whenever the machine's IP address is changed. When specifying the interval between updates, enter the time in hours in the [DNS Dynamic Update Interval] text box. [mDNSSettings@ [UsemDNS@ Adopted by Bonjour, mDNS (multicast DNS) is a protocol for associating a host name with an IP address without using DNS. Select the check box to enable mDNS and enter the mDNS name in the [mDNS Name] text box. [DHCPOptionSettings@ Network 378
[AcquireHostName@ Select the check box to enable Option 12 to obtain the host name from the DHCP server. [DNSDynamicUpdate@ Select the check box to enable Option 81 to dynamically update the DNS records through the DHCP server. [AcquireSMTPServerAddress@(MF249dw/MF247dw) Select the check box to enable Option 69 to obtain an SMTP server address from the DHCP server. [AcquirePOPServerAddress@(MF249dw/MF247dw)Select the check box to enable Option 70 to obtain a POP3 server address from the DHCP server.3Click [OK]. Con4gurLng IPv6DNS 1Click [Edit] in [IPv6 Settings].2Con4gure IPv6 DNS settings. The [Use IPv6] check box must be selected to con4gure the settings. SettingIPv6 Addresses(P.340)Network 379
[DNSSettings@ [PrimaryDNSServerAddress@Enter the IP address of a DNS server. Addresses that start with "ff" (or multicast address) cannot be entered. [SecondaryDNSServerAddress@ Enter the IP address of a secondary DNS server, if any. Addresses that start with "ff" (or multicast address) cannot be entered. [UseSameHostName/DomainNameasIPv4@ Select the check box to use the same host and domain names as in IPv4. [HostName@ Enter up to 47 alphanumeric characters for the host name of the machine that is to be registered to the DNS server. [DomainName@ Enter up to 47 alphanumeric characters for the name of the domain the machine belongs to, such as "example.com." [DNSDynamicUpdate@ Select the check box to dynamically update the DNS records whenever the machine's IP address is changed. To specify the type(s) of addresses you want to register to the DNS server, select the check box for [Register Manual Address], [Register Stateful Address], or [Register Stateless Address]. To specify the interval between updates, enter the time in hours in the [DNS Dynamic Update Interval] text box. [mDNSSettings@ [UsemDNS@ Adopted by Bonjour, mDNS (multicast DNS) is a protocol for associating a host name with an IP address without using DNS. Select the check box to enable mDNS. [UseSamemDNSNameasIPv4@ Select the check box to use the same mDNS name as in IPv4. To set a different name, clear the check box and enter the mDNS name in the [mDNS Name] text box. 3Click [OK]. Network 380
UsingtheoperationpanelDNS settings can also be accessed from in the Screen. IPv4Settings(P.476) IPv6 Settings(P.477) LINKS SettingIPv4Address(P.337) SettingIPv6Addresses(P.340) ViewingNetworkSettings(P.344) Network 381
Con4gurLngSMB 1469-076 Server Message Block (SMB) is a protocol for sharing resources, such as 4les and printers, with more than one device in a network. The machine uses SMB to store scanned documents into a shared folder. Depending on your network, you may have to set the NetBIOS name and workgroup name. NetBIOSName In a Windows network that uses NetBIOS, NetBIOS names are used for identifying network-connected computers as well as for 4le sharing and other network services. Most computers use the computer name as the NetBIOS name. WorkgroupName Workgroup name is a name for grouping multiple computers so that basic network functions, such as 4le sharing, become available in a Windows network. Specify the workgroup name to identify the group that the machine belongs to. 1StarttheRemoteUIandlogoninSystemManagerMode.StartingRemote UI(P.450)2Click[Settings/[email protected][NetworkSettings@[SMB[email protected] 382