Canon printer imageCLASS MF247dw User Manual
Have a look at the manual Canon printer imageCLASS MF247dw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 476
You can edit a registered item by clicking the corresponding text link under [Number], [Type] or [Name].
You can delete a registered item by clicking the corresponding [Delete] button.
5Select[DestinationTypetoRegister@andclick[OK@.
To register the shared folder destination, select [File].
6Specifythedestination.
Toregisterthefaxdestination
[Name@
Enter the name of the destination.
[FaxNumber@
Enter the fax number of the destination. [ECMTX@
Select the check box to make the...](http://img.usermanuals.tech/thumb/14/970/w64_printer-imageclass-mf247dw-1478271361_d-475.png "Page 476
You can edit a registered item by clicking the corresponding text link under [Number], [Type] or [Name].
You can delete a registered item by clicking the corresponding [Delete] button.
5Select[DestinationTypetoRegister@andclick[OK@.
To register the shared folder destination, select [File].
6Specifythedestination.
Toregisterthefaxdestination
[Name@
Enter the name of the destination.
[FaxNumber@
Enter the fax number of the destination. [ECMTX@
Select the check box to make the...")
![Page 477
If it takes time for transmissions to start, such as when there is a poor telephone connection, you can adjustthe transmission start speed downward incrementally starting from [33600 bps].
[LongDistance@
Specify [International (1)] to [International (3)] according to the transmission conditions when registering overseas fax numbers.
You can also specify [ECM TX] and [Speed] from ( FaxSettings(P.498)) on the operation
panel. However, settings made from are enabled for the detailed settings of...](http://img.usermanuals.tech/thumb/14/970/w64_printer-imageclass-mf247dw-1478271361_d-476.png "Page 477
If it takes time for transmissions to start, such as when there is a poor telephone connection, you can adjustthe transmission start speed downward incrementally starting from [33600 bps].
[LongDistance@
Specify [International (1)] to [International (3)] according to the transmission conditions when registering overseas fax numbers.
You can also specify [ECM TX] and [Speed] from ( FaxSettings(P.498)) on the operation
panel. However, settings made from are enabled for the detailed settings of...")
![Page 478
Use "\" as a separator. Specify the level that follows the path speci4ed in [Host Name].
[UserName@ Enter the user name set for the shared folder (up to 32 characters). [SetPassword@
To set a password for the shared folder, select this check box and enter a [Password] of up to 32 characters.Ensurethatthesamedisplaylanguageisselectedonboththecomputerandthe
RemoteUI.
[Host Name] and [Folder Path] may not be displayed correctly or may not be referenceable.
7Click[OK@.
LINKS...](http://img.usermanuals.tech/thumb/14/970/w64_printer-imageclass-mf247dw-1478271361_d-477.png "Page 478
Use \"\\" as a separator. Specify the level that follows the path speci4ed in [Host Name].
[UserName@ Enter the user name set for the shared folder (up to 32 characters). [SetPassword@
To set a password for the shared folder, select this check box and enter a [Password] of up to 32 characters.Ensurethatthesamedisplaylanguageisselectedonboththecomputerandthe
RemoteUI.
[Host Name] and [Folder Path] may not be displayed correctly or may not be referenceable.
7Click[OK@.
LINKS...")
NetworkSettings 1469-08W All the settings about the network are listed with short descriptions. Default settings are marked with a dagger ( ). IfascreenforenteringaPINisdisplayed Enter the PIN with the numeric keys and tap . SettingtheSystemManagerPIN(P.397) Asterisks( * ) Settings marked with an asterisk ( * ) are only available for the MF249dw / MF247dw. SelectWired/WirelessLAN(P.473) WirelessLANSettings(P.473) DirectConnectionSettings(P.475) TCP/IPSettings(P.476) SNMPSettings(P.480) DedicatedPortSettings(P.482) WaitingTimeforConnectionatStartup(P.482) EthernetDriverSettings(P.482) IEEE802.1XSettings(P.482) InitializeNetworkSettings(P.483) Select Wired/Wireless LAN * When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using the following ). SelectingWiredLANorWirelessLAN(MF249dw/MF247dw)(P.317) Wired LAN Wireless LAN Wireless LAN Settings * Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the setting for saving power consumption. See "Getting Started" ManualsIncludedwiththeMachine(P.660) . SSIDSettings Select to con4gure a wireless connection by specifying information including an SSID or a network key by inputting manually from the operation panel. SelectAccessPoint Wireless LAN routers that can access the machine are automatically located, so you can select from the list.You must manually enter a network key, such as a WEP key or a PSK. SettingUpConnectionbySelecting aWirelessRouter(P.326) Setting Menu List 473
EnterManuallySelect to con4gure a wireless connection by manually entering an SSID. By using this method, you can specify
authentication and encryption settings in detail.
SettingUpConnectionbySpecifyingDetailed
Settings(P.329)
SecuritySettings
None
WEP
Open System
Select WEP Key: 1/2/3/4Edit WEP Key
Shared Key Select WEP Key: 1/2/3/4
Edit WEP Key
WPA/WPA2-PSK Auto
AES-CCMP
WPSPushButtonMode
Select to automatically con4gure a wireless connection by using the button on a WPS wireless router. Setting
UpConnectionUsingWPSPushButtonMode(P.321)
WPSPINCodeMode
Select to con4gure a wireless connection by entering a PIN code for a WPS wireless router. SettingUp
ConnectionUsingWPSPINCodeMode(P.323)
PowerSaveMode
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
Off
On
Read the displayed message
Select or
WirelessLANInformation
Select to view the current wireless LAN settings. ViewingNetworkSettings(P.344)
MAC Address
Wireless LAN Status
Latest Error Information
Channel
SSID Settings
Security Settings
Power Save Mode
Setting Menu List
474
Direct Connection Settings *
Con4gure settings for Direct Connection. After con4guring settings, you can connect to the machine directly and
wirelessly from a mobile device even without an access point or wireless LAN router.
UseDirectConnection
Select whether to use Direct Connection. You can select or when is set to while the Wirelss LAN connection is enabled.
MakeDirectConnection(AccessPointMode)(MF249dw/MF247dw)(P.291)
Off
On Direct Connection Only
Wireless LAN/Direct Conn. (Auto Switch)
Select or when is selected in
TimeUntilDirectConnectionTermination
Set the time that the machine exits Direct Connection mode automatically. Can be set when is . Once the time set in is reached,
communication between the machine and a mobile device is discontinued. Before starting a large print job, you
should set a long delay time or set the delay time to (Off).
0 (Off)
1 to 10
to 60 (min.)
Set time to disconnect
AccessPointModeSettings
To make detailed settings, such as authentication and encryption, enter an SSID and network key to con4gure
settings. Can be set when is .
UseCustomSSID
Off
On
SSID (1-20 Characters)
UseCustomNetworkKey Off
On
Network Key (10 Char.)
Setting Menu List
475
Select or Set SSID Settings or Network Key Settings TCP/IP Settings Specify settings for using the machine in a TCP/IP network, such as IP address settings. IPv4Settings Specify settings for using the machine in an IPv4 network. IPAddressSettings Con4gure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP network. SettingIPv4Address(P.337) AutoAcquire Select Protocol Off DHCP BOOTP RARP Auto IP Off On ManuallyAcquire IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Gateway Address: 0.0.0.0 CheckSettings Auto Acquire IP Address Subnet Mask Gateway Address PINGCommand Select to check that the machine is connected to a computer over a network. TestingtheNetwork Connection(P.339) DNSSettings Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Con4gurLng DNS(P.377) DNSServerSettings Primary DNS Server: 0.0.0.0 Secondary DNS Server: 0.0.0.0 DNSHostName/DomainNameSettings Host Name Setting Menu List 476
Domain Name DNSDynamicUpdateSettings Off On DNS Dyn. Updt. Intrvl. 0 to 24 to 48 (hr.) mDNSSettingsSpecify settings for using DNS functions without DNS servers. Con4gurLng DNS(P.377) Off On mDNS Name DHCPOptionSettings Select whether to acquire the host name and whether to use the dynamic update function via the DHCP options when DHCP is enabled. Con4gurLng DNS(P.377) AcquireHostName Off On DNSDynamicUpdate Off On AcquireSMTPServerAddress * Off On AcquirePOPServerAddress * Off On IPv6Settings Specify settings for using the machine in an IPv6 network. UseIPv6 Enable or disable IPv6 in the machine. You can also view the current settings. SettingIPv6 Addresses(P.340) Off On CheckSettings Link-Local Address Pre4x LengthSetting Menu List 477
StatelessAddressSettingsEnable or disable stateless addresses. SettingIPv6Addresses(P.340) Off On CheckSettings Stateless Address Pre4x Length UseDHCPv6 Enable or disable the stateful address that is acquired via DHCPv6. SettingIPv6Addresses(P.340) Off On CheckSettings Stateful Address Pre4x Length DNSSettings Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Con4gurLng DNS(P.377) DNSHostName/DomainNameSettings Use IPv4 Host/Domain Off Host Name Domain Name On DNSDynamicUpdateSettings Off On Register Manual Address Off On Register Stateful Address Off On Register Stateless Address Off On DNS Dynamic Update Interval 0 to 24 to 48 (hr.) Setting Menu List 478
mDNSSettingsSpecify settings for using DNS functions without DNS servers. Con4gurLng DNS(P.377) Off On Use IPv4 Name for mDNS Off mDNS Name On LPDPrintSettings Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. Con4gurLng PrintingProtocolsandWSDFunctions(P.348) Off On RAWPrintSettings Enable or disable RAW, a Windows speci4c printing protocol. Con4gurLng PrintingProtocolsandWSD Functions(P.348) Off On WSDSettings Enable or disable automatic browsing and acquiring information for the printer or scanner by using the WSD protocol that is available on Windows Vista/7/8/10/Server 2008/Server 2012. Con4gurLng PrintingProtocols andWSDFunctions(P.348) WSDPrintSettings Use WSD Print Off On Use WSD Browsing Off On WSDScanSettings Use WSD Scan Off On Use Computer Scan Off On UseMulticastDiscovery Off On Setting Menu List 479
UseHTTP Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote UI, WSD printing, or printing with Google Cloud Print. DisablingHTTPCommunication(P.423) Off On PortNumberSettings Change port numbers for protocols according to the network environment. ChangingPortNumbers(P.409) LPD 1 to 515 to 65535 RAW 1 to 9100 to 65535 WSDMulticastDiscovery 1 to 3702 to 65535 HTTP 1 to 80 to 65535 POP3 * 1 to 110 to 65535 SMTP * 1 to 25 to 65535 SNMP 1 to 161 to 65535 MTUSize Select the maximum size of packets the machine sends or receives. ChangingtheMaximumTransmission Unit(P.375) 1300 1400 1500 SNMP Settings Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software. MonitoringandControllingtheMachinewithSNMP(P.386) SNMPv1Settings Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to Management Information Base (MIB) objects. Off Setting Menu List 480
On
Community Name 1 SettingsOff
On
Community Name
MIB Access Permission
Community Name 2 Settings Off
On Community Name
MIB Access Permission
Dedicated Community Settings Off
On
Select or Specify settings if is selected
SNMPv3Settings
Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is
enabled.
Off
On
Select or
AcquirePrinterMngt.Info.fromHost
Enable or disable the monitoring of printer management information from a networked computer running
SNMP-compatible software.
Off
On
Select or
Setting Menu List
481
Dedicated Port Settings
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan Utility and when browsing or specifying the machine settings over the network.
Off
On
Select or
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Settinga
WaitTimeforConnectingtoaNetwork(P.376)
0 to 300 (sec.)
Ethernet Driver Settings
Select the communication mode of Ethernet (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). You can also view the MAC address of the machine.
AutoDetect
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Con4gurLng EthernetSettings(P.373)
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type 10BASE-T
100BASE-TX
On
MACAddress
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
theMACAddressforWiredLAN(P.345)
IEEE 802.1X Settings
Enable or disable IEEE 802.1X authentication.
Con4gurLng IEEE802.1XAuthentication(P.429)
Off
OnSetting Menu List
482