Canon printer Color imageCLASS MF9170c User Manual
Have a look at the manual Canon printer Color imageCLASS MF9170c User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 386
Scanning
8-5
Basic Scanning Operations
Basic Scanning Operations
This section describes the basic procedures for scanning documents.
Scanning Documents to a File Server
This section describes the basic procedure for sending scanned documents to a computer that acts as a file
server on a network.
1
Place your originals.
2
Press (Main Menu).
3
Use [▼], [▲] or (Scroll Wheel) to select
or , then
press [OK].
If you select , use [▼], [▲] or
(Scroll Wheel) to select ,
then press [OK].
4
Use [▼],...](http://img.usermanuals.tech/thumb/14/917/w64_printer-color-imageclass-mf9170c-1478268181_d-385.png "Page 386
Scanning
8-5
Basic Scanning Operations
Basic Scanning Operations
This section describes the basic procedures for scanning documents.
Scanning Documents to a File Server
This section describes the basic procedure for sending scanned documents to a computer that acts as a file
server on a network.
1
Place your originals.
2
Press (Main Menu).
3
Use [▼], [▲] or (Scroll Wheel) to select
or , then
press [OK].
If you select , use [▼], [▲] or
(Scroll Wheel) to select ,
then press [OK].
4
Use [▼],...")
![Page 389
Scanning
8-8
Basic Scanning Operations
4
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
5
Use [▼], [▲] or (Scroll Wheel) to select
, then press
[OK].
6
Use [▼], [▲] or (Scroll Wheel) to select
the media you want to store in, then press
the right Any key to select .
7
Make the scan settings you require.
You can specify the following settings: : Specifies the
color type of originals and the file format for
sending. (See “Scan,” in the e-Manual.)
: Adjusts the resolution
of...](http://img.usermanuals.tech/thumb/14/917/w64_printer-color-imageclass-mf9170c-1478268181_d-388.png "Page 389
Scanning
8-8
Basic Scanning Operations
4
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
5
Use [▼], [▲] or (Scroll Wheel) to select
, then press
[OK].
6
Use [▼], [▲] or (Scroll Wheel) to select
the media you want to store in, then press
the right Any key to select .
7
Make the scan settings you require.
You can specify the following settings: : Specifies the
color type of originals and the file format for
sending. (See “Scan,” in the e-Manual.)
: Adjusts the resolution
of...")
![Page 390
Scanning
8-9
Basic Scanning Operations
9
Use [▼], [▲] or (Scroll Wheel) to select
the original size, then press [OK].
10
Press (Start).
Scanning starts and the scanned data is sent
to the specified media when scanning is
complete.
To cancel scanning, press the left Any key to
select or press
(Stop).
–
–
1
Place your originals.
2
Start Network ScanGear from the
application on your computer.
For details, see “Scan,” in the e-Manual.
3
Make scan settings on the [Main],
[Options], and...](http://img.usermanuals.tech/thumb/14/917/w64_printer-color-imageclass-mf9170c-1478268181_d-389.png "Page 390
Scanning
8-9
Basic Scanning Operations
9
Use [▼], [▲] or (Scroll Wheel) to select
the original size, then press [OK].
10
Press (Start).
Scanning starts and the scanned data is sent
to the specified media when scanning is
complete.
To cancel scanning, press the left Any key to
select or press
(Stop).
–
–
1
Place your originals.
2
Start Network ScanGear from the
application on your computer.
For details, see “Scan,” in the e-Manual.
3
Make scan settings on the [Main],
[Options], and...")
Network 9-1 Flowchart for Setting Up Network ............................. 9-2 What is the Network? .................................................. 9-3 Overview of Network Functions ................................. 9-4 This chapter describes what the network is, what you can do with the network, and what you have to do to use the machine with the network. Network Chapter 9
Network 9-2 Flowchart for Setting Up Network Flowchart for Setting Up Network Follow the procedures in the flowchart below to set up each network function.
Network 9-3 What is the Network? What is the Network? In the computer field, a network is a system of interconnected computers that communicate with each other. “Internet” and “LAN” are the two most common words used to refer to networks. The Internet is the vast network to which computers all over the world are connected. Computers connected to the Internet anywhere in the world can exchange information with one another. On the other hand, LAN is the abbreviation for “Local Area Network” and means a network within a limited area (in an office, for example).
Network 9-4 Overview of Network Functions Overview of Network Functions This section describes actions you can perform using the network function.
Settings from a PC 10-1 Settings from a PC This chapter describes how to use the Remote UI functions. Overview of Remote UI .............................................10-2 Starting the Remote UI..............................................10-4 Settings from a PC Chapter 10
Settings from a PC 10-2 Overview of Remote UI Overview of Remote UI Remote UI enables you to check the machine’s status and manage the machine’s functions from a computer on the network using a web browser. Using the computer keyboard, the management process, such as entering addresses to the address book will be easier.
Settings from a PC 10-3 Overview of Remote UI Checking the Device Information from a computer The Remote UI enables you to check the device information. Accessing to the device information from the distant place provides you with easy device management. For details, see “Checking Device Status and Information” in the e- Manual. Managing jobs from a computer The Remote UI enables you to manage print jobs and view job logs. Accessing to the print job information from the distant place provides you with easy job management. For details, see “Job Management” in the e-Manual. Editing the Address Book from a computer The Remote UI enables you to make additions and changes to each item of the address book. You can use the PC keyboard, so entering a lot of addresses to the address book will be easier. For details, see “Managing the Address Book” in the e-Manual. Setting/registering from a computer The Remote UI enables you to specify the machine’s system settings. You can specify the various custom system settings more easily and speedy. For details, see “Customizing System Settings” in the e-Manual. By using remote UI you can set and confirm following functions.
Settings from a PC 10-4 Starting the Remote UI Starting the Remote UI To start the Remote UI, follow the procedure described below. 1 Prepare the Network. Set up the machine for use in a network, then connect the machine and the computer to your network router or a hub. For details, see “Setup Computers and Software,” in the Starter Guide. 2 Start the web browser. 3 Enter the IP address of the machine in [Address] or [Location], then press [Enter] on the keyboard. For details on how to check the IP address, see “Setting and Checking the IP Address,” in the e- Manual. The Remote UI screen appears. 4 Enter the required data. The required data differ depending on the authentication mode you are using. ■In case of default settings: ① Select [System Manager Mode] or [End-User Mode].
Settings from a PC 10-5 Starting the Remote UI ② For System Manager Mode, click OK. For End-User Mode, enter the User Name and click OK. ■ In case system manager ID and password is set: ① Select [System Manager Mode] or [End-User Mode]. ② For System Manager Mode enter the System Manager ID and the Password, and click OK. For End-User Mode, enter the User Name and click OK. ■ For Department ID Management mode: ① Enter the Department ID and Password, and click OK.