Canon Pixma Mp630 User Guide
Have a look at the manual Canon Pixma Mp630 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Back button, then repeat the procedure from step 8. 10.Confirm the print image on the DVD/CD, then press the OK button. Note Other options Printing a Specified Area (Trimming) in Using Useful Display Functions 11.Check the print settings, then press the OK button. The message for preparation is displayed. Note Press the Black button for black & white copying. To change print settings, press the Back button repeatedly until the screen for the setting item to change is displayed, then change the setting. 12.Set the printable DVD/CD. Press the left Function button to see how to set the printable DVD/CD. 13.Press the Color button. Note If you press the Black button in step 11, black & white copying will start even if you press the Color button. To cancel copying, press the Stop button. After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried. Page top Page 601 of 805 pages Printing from Film (MP980 series)
Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing with CD-LabelPrint from the Computer Printing with CD-LabelPrint from the Computer CD-LabelPrint is bundled application software that allows you to edit and modify data before printing. Install it on your computer to use it. For information on how to install this software, refer to your setup manual. For details on how to print with CD-LabelPrint, refer to its manual. If you are using Windows, click Start > All Programs (or Programs in Windows 2000) > CD- LabelPrint > Help. If you are using a Macintosh, open Application folder in the location where the MP Drivers were installed > CD-LabelPrint folder > Manual folder > double-click Manual.htm. Page top Page 602 of 805 pages Printing with CD-LabelPrint from the Computer
Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from a PictBridge Compliant Device Printing from a PictBridge Compliant Device This section describes how to print photos on DVD/CDs (printable discs) from a PictBridge compliant device. Important Depending on your PictBridge compliant device, you may not be able to print on the label side of DVD/CDs. For details, refer to the instruction manual of your PictBridge compliant device. You cannot print on 8 cm DVD/CDs. 1.Make sure that the machine is turned on. 2.Connect the PictBridge compliant device to the machine using a USB cable recommended by the manufacturer of the device. For details, refer to Printing Photographs Directly from a Compliant Device. 3.Specify the print settings as follows Paper size: 12cmDVD/CD Paper type: Default Layout: Bordered or Default You can make image optimize settings using the menu on the LCD of your PictBridge compliant device. For details, refer to About PictBridge Print Settings. Note If your PictBridge compliant device does not have setting menu, change the setting from the machine. Specifying the PictBridge Print Settings on the Machine 4.Set the printable DVD/CD. Attaching/Removing the CD-R Tray 5.Start printing from your PictBridge compliant device. Specifying the PictBridge Print Settings on the Machine You can specify the PictBridge print settings on the machine. Note When a PictBridge compliant device is connected to the machine, the PictBridge print settings screen can also be displayed by pressing the left Function button. 1.Make sure that the machine is turned on. 2.Select Settings on the HOME screen, then press the OK button. The Settings screen is displayed. 3.Select Device settings, then press the OK button. The Device settings screen is displayed. 4.Select PictBridge print settings, then press the OK button. The PictBridge print settings screen is displayed. Page 603 of 805 pages Printing from a PictBridge Compliant Device
5.Select DVD/CD print setting, then press the OK button. 6.Use the or button to select Outer circle or Inner circle and use the or button to change the print area. 7.Press the OK button. Note Measure the outer and inner diameters of the printing surface of the printable DVD/ CD and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter. For information on printable discs, contact their manufacturers. 8.Use the or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button. Note If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the suitable density printing. If not, specify Other DVD/CD. Page top Page 604 of 805 pages Printing from a PictBridge Compliant Device
Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing Area Printing Area Printable DVD/CDs The printing area of both printable DVDs and CDs is the area excluding the 1 mm area from the internal and external diameters of the label. Recommended printing area Page top Page 605 of 805 pages Printing Area
Advanced Guide > Printing on DVD/CDs > Troubleshooting Troubleshooting An Error Message Is Displayed on the LCD Message Appears on the Computer Screen Cannot Print on DVD/CDs Error Message Appears on a PictBridge Compliant Device Page top Page 606 of 805 pages Troubleshooting
Advanced Guide > Printing on DVD/CDs > Troubleshooting > An Error Message Is Displayed on the LCD An Error Message Is Displayed on the LCD If an error message is displayed on the LCD, take the corresponding action described below. MessageAction Open the inner cover, place the CD-R tray and press OK. If the Inner Cover is closed when starting DVD/CD printing, open the Inner Cover with the Scanning Unit (Cover) closed, set the CD-R Tray, and then press the OK button on the machine. Do not open or close the Inner Cover while printing is in progress. Doing so may damage the machine. Page top Page 607 of 805 pages An Error Message Is Displayed on the LCD
Advanced Guide > Printing on DVD/CDs > Troubleshooting > Message Appears on the Computer Screen Message Appears on the Computer Screen Errors About DVD/CD Printing Are Displayed Message: 1001 Is Displayed Error Number: 1002 Is Displayed Message: 1850 Is Displayed Errors About DVD/CD Printing Are Displayed Check 1: Is the CD-R Tray placed properly? Open the Inner Cover, properly place the CD-R Tray again, then press the OK button. Make sure that you are using the CD-R Tray supplied with the machine (G is on the upper side). For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray. Check 2: Is the DVD/CD placed on the CD-R Tray? Properly place the DVD/CD on the CD-R Tray, and attach the CD-R Tray again, and then press the OK button. Make sure that you are using the CD-R Tray supplied with this machine (G is on the upper side). For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray. Check 3: Unrecognizable DVD/CD may be placed. Canon recommends that you use DVD/CDs specially processed to be printed on by an inkjet printer. Check 4: Is the DVD/CD on the CD-R Tray already printed? If you place the DVD/CDs on which have already been printed on the CD-R Tray, the CD-R Tray is ejected. In this case, change the settings of the printer driver and try printing again. Clear the Detects a printable disc in the CD-R tray check box in Custom Settings on the Maintenance tab, then click Send. When printing is over, select the Detects a printable disc in the CD-R tray check box and click Send. Note If the Detects a printable disc in the CD-R tray check box is cleared, printing may start without the DVD/CD loaded. Selecting the check box prevents the CD-R Tray from getting dirty. Check 5: Is the Inner Cover opened when starting printing on paper, or while printing is in progress? Close Inner Cover, then press the OK button on the machine. Do not open or close the Inner Cover while printing is in progress. This may damage the machine. Message: 1001 Is Displayed Check: Place the CD-R Tray properly. Place the CD-R Tray properly then press the OK button. Make sure that you are using the CD-R Tray supplied with the machine (G is on the upper side). For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray. Page 608 of 805 pages Message Appears on the Computer Screen
Error Number: 1002 Is Displayed Check 1: Place the DVD/CD on the CD-R Tray properly. Place the DVD/CD on the CD-R Tray properly, then press the OK button on the machine. Make sure that you are using the CD-R Tray supplied with the machine (G is on the upper side). For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray. Check 2: Unrecognizable DVD/CD may be placed. Canon recommends that you use DVD/CDs specially processed to be printed on by an inkjet printer. Check 3: Is the DVD/CD on the CD-R Tray already printed? If you place the DVD/CDs on which have already been printed on the CD-R Tray, the CD-R Tray is ejected. In this case, change the settings of the printer driver and try printing again. Clear the Detects a printable disc in the CD-R tray check box in Custom Settings on the Canon IJ Printer Utility dialog box, then click Send. When printing is over, select the Detects a printable disc in the CD-R tray check box and click Send. Note If the Detects a printable disc in the CD-R tray check box is cleared, printing may start without the DVD/CD loaded. Selecting the check box prevents the CD-R Tray from gettin g dirty. Message: 1850 Is Displayed Check: Open the Inner Cover, then place the CD-R Tray properly. Open the Inner Cover, place the CD-R Tray properly, then press the OK button. For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray. Page top Page 609 of 805 pages Message Appears on the Computer Screen
Advanced Guide > Printing on DVD/CDs > Troubleshooting > Cannot Print on DVD/CDs Cannot Print on DVD/CDs DVD/CD Printing Does Not Start CD-R Tray Does Not Feed Properly CD-R Tray Jammed DVD/CD Printing Does Not Start Check 1: Is the CD-R Tray placed properly? Open the Inner Cover, properly place the CD-R Tray again, then press the OK button. Use the CD-R Tray supplied with this machine (G is on the upper side). For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray. Check 2: Is the DVD/CD placed on the CD-R Tray? Place the DVD/CD on the CD-R Tray properly, then press the OK button on the machine. Make sure that you are using the CD-R Tray supplied with the machine (G is on the upper side). For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray. Check 3: If DVD/CD printing stops before it is complete, try the operation again. If a certain period of time has elapsed while DVD/CD printing is in progress, the machine stops initializing. If you press the OK button, the machine resumes initializing. Try the operation again following the on-screen instructions. CD-R Tray Does Not Feed Properly Check 1: Is the CD-R Tray placed properly? Properly place the CD-R Tray again, then press the OK button. Make sure that you are using the CD-R Tray supplied with the machine (G is on the upper side). For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray. Check 2: Unrecognizable DVD/CD may be placed. Canon recommends that you use DVD/CDs specially processed to be printed on by an inkjet printer. Check 3: Is the DVD/CD on the CD-R Tray already printed? If you place the DVD/CDs on which have already been printed on the CD-R Tray, the CD-R Tray is ejected. In this case, change the settings of the printer driver and try printing again. Clear the Detects a printable disc in the CD-R tray check box in Custom Settings on the Maintenance tab, then click Send. When printing is over, select the Detects a printable disc in the CD-R tray check box and click Send. Clear the Detects a printable disc in the CD-R tray check box in Custom Settings on the Canon IJ Printer Utility dialog box, then click Send. When printing is over, select the Detects a printable disc in the CD-R tray check box and click Send. Note If you left cleared Detects a printable disc in the CD-R tray check box and start printing Page 610 of 805 pages Cannot Print on DVD/CDs