Canon Pixma Ip110 User Guide
Have a look at the manual Canon Pixma Ip110 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1688Cause Ink has run out. (The lamp on the ink tank flashes.) Action Replace the ink tank and close the print head cover. Printing under the current condition may damage the printer. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the printer's RESUME/CANCEL button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.501
1689Cause The remaining ink level cannot be correctly detected. ActionReplace the ink tank and close the print head cover. Printing with an ink tank that was once empty may damage the printer. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the printer's RESUME/CANCEL button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks.502
1700Cause The ink absorber is almost full. Action Press the printer's RESUME/CANCEL button to continue printing. Contact the service center.503
1701Cause The ink absorber is almost full. Action Press the printer's RESUME/CANCEL button to continue printing. Contact the service center.504
1810Cause Battery has exhausted. Action If printing is in progress, cancel printing. Turn off the printer, then either change to a fully charged battery pack or detach the battery attachment and connect the supplied AC adapter to the printer.505
2100Cause The paper size in the print settings and the size of the loaded paper do not match. Action Check the print settings and the loaded paper, load paper of the correct size, then press the printer's RESUME/CANCEL button. If you want to cancel printing, press the printer's RESUME/CANCEL button again while the POWER lamp is flashing.506
2101Cause The paper size in the print settings and the size of the loaded paper do not match. Action Check the print settings and the loaded paper, load paper of the correct size, then press the printer's RESUME/CANCEL button. If you want to cancel printing, press the printer's RESUME/CANCEL button again while the POWER lamp is flashing.507
2103Cause The printer cannot detect the paper size. Action Press the printer's RESUME/CANCEL button to dismiss the error, then try to print again. If this error still occurs even after printing again, set the printer not to detect the paper width by using the printer driver or Remote UI. Note • Depending on the type of paper, the printer may not detect the paper width. Additionally, if the print head cover is opened while printing is in progress, the printer may not detect the paper width. 508
2500Cause The cause of following may have occurred the failure of Automatic Print Head Alignment.• Print head nozzles are clogged. • The paper of size other than A4 or Letter is loaded. • The paper output slot is exposed to strong light. Action Press the printer's RESUME/CANCEL button to dismiss the error, then take the actions described below. • Print the nozzle check pattern to check the status of the print head. • Load a sheet of A4/Letter-sized Canon Matte Photo Paper MP-101 and perform Automatic Print Head Alignment again. • Adjust your operating environment and/or the position of the printer so that the paper output slot is notexposed directly to strong light. After carrying out the above measures, if the problem continues after aligning the print head again, press the printer's RESUME/CANCEL button to dismiss the error, and then perform Manual Print Head Alignment. 509
4103Cause Cannot perform printing with the current print settings. Action Press the printer's RESUME/CANCEL button, to cancel printing. Then change the print settings and print again.510