Canon Pixma Ip110 User Guide
Have a look at the manual Canon Pixma Ip110 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1200Cause The print head cover is open. Action Close the print head cover and wait for a while. Do not close it while you are replacing an ink tank. Important • When you replace the ink tank, do not touch the print head lock lever. 491
1401Cause The print head may be damaged. Action Contact the service center.492
1403Cause The print head may be damaged. Action Contact the service center.493
1405Cause The print head may be damaged. Action Contact the service center.494
1410Cause The ink tank cannot be recognized. ActionOpen the print head cover and check that the ink tank which lamp is off is installed properly. If the front (innermost) part of the ink tank is sticking up, push down on the "Canon" logo on the ink tank to install it properly. If the ink lamp is off even though the ink tank is installed properly, replace the ink tank.495
1411Cause The ink tank cannot be recognized. ActionOpen the print head cover and check that the ink tank which lamp is off is installed properly. If the front (innermost) part of the ink tank is sticking up, push down on the "Canon" logo on the ink tank to install it properly. If the ink lamp is off even though the ink tank is installed properly, replace the ink tank.496
1600Cause If the lamp on the ink tank is flashing, ink may have run out. Action Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the printer's RESUME/CANCEL button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition. Note • If multiple ink lamps are flashing red, check the status of each ink tank. 497
1660Cause The ink tank is not installed. Action Install the ink tank.498
1681Cause More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.) Action Confirm that the ink tanks are installed in the appropriate positions.499
1687Cause The print head lock lever is not locked or an ink tank is installed improperly. Action Open the print head cover, then take the corresponding actions below.• Make sure that the ink tank is installed properly. Push the ink tank until it clicks into place. If the front (innermost) part of the ink tank is sticking up, push down on the "Canon" logo on the ink tank. • There are the right and left tabs on the print head lock lever. Push both tabs of the print head locklever and make sure that both tabs are locked securely. Push both tabs of the print head lock lever until each clicks into place. Push in the order of the left and right lever. After taking the corresponding actions, close the print head cover. 500