Canon Laser Shot Lbp3500 User Guide

2-sided Printing2-78
Loading and Outputting Paper
2
6Display the [Paper Source] sheet, then select [Paper Source].
Specify the same setting as the one for [Paper Source], although the setting for 
[Paper Source] changes to ones such as [First Page] or [Other Pages] when 
[Paper Selection] is set to other than [Same Paper for All Pages].
7Select the paper type specified in [Paper Type].
 

2-79
Loading and Outputting Paper
2
2-sided Printing
NOTE
Load paper based on the following [Paper Type] criteria:
*1If paper curls excessively when printed with [Plain Paper] selected, select [Plain Paper L].
*2If you want to improve the fixation when printed with [Plain Paper] selected, select [Plain Paper H].
8Click [OK] to close the Properties dialog box.
Paper TypePrinter Driver Setting
Plain 
paper60 - 90 g/m
2
[Plain Paper]
[Plain Paper L]*
1
[Plain Paper H]*2
 

2-sided Printing2-80
Loading and Outputting Paper
2
9Click [OK] to start printing.
 

2-81
Loading and Outputting Paper
2
2-sided Printing
 
Performing 2-sided Printing Manually
Since this printer can print the reverse side of previously printed paper, you can 
print both sides of the paper to which automatic 2-sided printing cannot be applied.
IMPORTANT
When performing manual 2-sided printing, flatten folds and curls of the paper, and then 
load the paper one piece at a time in the multi-purpose tray.
1Load paper in the multi-purpose tray.
NOTE
•When loading paper at a size of A4, B5, A5,...

2-sided Printing2-82
Loading and Outputting Paper
2
•When loading paper at a size of A3, B4, Ledger (11 x 17), Legal, or 8K in portrait 
orientation, load the paper so that the printing side is facing up, as shown in the 
following figures.
(: Feeding direction)
 

2-83
Loading and Outputting Paper
2
2-sided Printing
2Select [Print] from the [File] menu in the application. Select 
the name of this printer for [Name] or [Printer Name], and then 
click [Properties].
3Display the [Page Setup] sheet, then from [Page Size], select 
the size of a document that you have created with the 
application.
 

2-sided Printing2-84
Loading and Outputting Paper
2
4From [Output Size], select the size of the loaded paper as 
needed.
Leave the setting at [Match Page Size] when the page size and the size of the 
paper loaded in the multi-purpose tray are the same, since there is no need to 
change the setting.
IMPORTANT
The print will be automatically reduced or enlarged to fit on the page when the 
settings for [Page Size] and [Output Size] are different.
5Display the [Paper Source] sheet and set [Paper Source] to...

2-85
Loading and Outputting Paper
2
2-sided Printing
6Select the paper type specified in [Paper Type].
NOTE
Load paper based on the following [Paper Type] criteria:
*1If paper curls excessively when printed with [Plain Paper] selected, select [Plain Paper L].
*2If you want to improve the fixation when printed with [Plain Paper] selected, select [Plain Paper H].
*3If you want to improve the fixation when printed with [Heavy Paper L] selected, select [Heavy Paper
H].
Paper TypePrinter Driver Setting
Plain...

2-sided Printing2-86
Loading and Outputting Paper
2
7Click [OK] to close the Properties dialog box.
8Click [OK] to start printing.
 

CHAPTER
3-1
3
Setting Up the Printing 
Environment
This chapter describes the procedure for installing the printer driver in a computer and 
specifying the settings for printing from a network computer by sharing the printer on the 
network.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
After Installing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....