Canon Laser Shot Lbp3500 User Guide

Loading Paper in the Multi-purpose Tray2-48
Loading and Outputting Paper
2
4Spread the paper guides a little wider than the actual paper 
width.
5Before loading transparencies or labels, fan them in small 
batches and align the edges.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•Be sure to fan the transparencies or labels thoroughly before loading them.  If they 
are not fanned enough, multiple sheets of paper may be fed at once, causing paper...

2-49
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
6Gently load the stack of paper with the printing side facing up 
until it touches the back of the tray.
Be sure that the paper stack is loaded under the load limit guides (A).
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•The multi-purpose tray can be loaded with up to the number of sheets listed below. 
Make sure that the paper stack does not exceed the load limit guides....

Loading Paper in the Multi-purpose Tray2-50
Loading and Outputting Paper
2
NOTE
To print letterhead paper or paper printed with a logo, load the paper in the proper 
orientation according to the following instructions:
(: Feeding direction)
-When loading paper at a size of A4, B5, A5, Letter, Executive, Index Card, or 16K 
in landscape orientation, load the paper so that the printing side is facing up, as 
shown in the following figures.
 

2-51
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
-When loading paper at a size of A3, B4, Ledger (11 x 17), Legal or 8K in portrait 
orientation, load the paper so that the printing side is facing up, as shown in the 
following figures.
7Align the paper guides with both sides of the stack.
 

Loading Paper in the Multi-purpose Tray2-52
Loading and Outputting Paper
2
IMPORTANT
Be sure to align the paper guides with the width of the paper. If the paper guides 
are too loose or too tight, this may result in misfeeds or paper jams.
Next, configure the printer driver (See p. 2-65).
Loading Envelopes in the Multi-purpose Tray
You can load envelopes at sizes of DL, COM10, C5, Monarch, and B5 in the 
multi-purpose tray. Use the following procedure when loading envelopes in the 
multi-purpose tray....

2-53
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
2Pull out the auxiliary tray.
IMPORTANT
Be sure to pull out the auxiliary tray when loading paper in the multi-purpose tray.
3When loading long-size paper such as Envelope B5 etc, open 
the tray extension. 
 

Loading Paper in the Multi-purpose Tray2-54
Loading and Outputting Paper
2
4Spread the paper guides a little wider than the actual paper 
width.
5Place the stack of envelopes on a flat surface, flatten them to 
release any remaining air, and be sure that the edges are 
pressed tightly.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
 

2-55
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
6Loosen any stiff corners of the envelopes and flatten curls as 
shown in the figure.
7Align the edges of the envelopes on a flat surface.
8Gently load the stack of envelopes with the printing side 
facing up until it touches the back of the multi-purpose tray as 
shown in the figure.
Be sure that the paper stack is loaded under the load limit guides (A).
(A)
 

Loading Paper in the Multi-purpose Tray2-56
Loading and Outputting Paper
2
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•Load envelopes as shown in the following figures.
(: Feeding direction)
•Up to 10 envelopes can be loaded in the multi-purpose tray. Make sure that the 
paper stack does not exceed the load limit guides.
•You cannot print on the reverse side (glued side) of envelopes.
9Align the paper guides with both sides of the stack.
-Envelope...

2-57
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
IMPORTANT
Be sure to align the paper guides with the width of the paper. If the paper guides 
are too loose or too tight, this may result in misfeeds or paper jams.
Next, configure the printer driver (See p. 2-65).
Loading Custom Size Paper (Non-Standard Paper) in the 
Multi-purpose Tray
Perform the following procedure to load custom size paper in the multi-purpose tray.
1Open the multi-purpose tray.
Holding the blue opening at...