Canon Laser Shot Lbp3500 User Guide

Loading Paper in the Multi-purpose Tray2-58
Loading and Outputting Paper
2
2Pull out the auxiliary tray.
IMPORTANT
Be sure to pull out the auxiliary tray when loading paper in the multi-purpose tray.
3When loading long-size paper, open the tray extension.
 

2-59
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
4Spread the paper guides a little wider than the actual paper 
width.
5Gently load the stack of paper with the printing side facing up 
until it touches the back of the tray.
Be sure that the paper stack is loaded under the load limit guides (A).
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•The multi-purpose tray can be loaded with up to approximately 100 sheets of plain...

Loading Paper in the Multi-purpose Tray2-60
Loading and Outputting Paper
2
•If the paper is curled or folded at corners, flatten it before loading it in the printer.
•If you use paper that has been poorly cut, multiple sheets of paper may be fed at 
once. In this case, fan the paper thoroughly, and then align the edges of the stack 
on a hard, flat surface.
NOTE
To print letterhead paper or paper printed with a logo, load the paper in the proper 
orientation according to the following instructions:
(:...

2-61
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
-When loading paper in portrait orientation, load the paper so that the printing side 
is facing up, as shown in the following figures.
6Align the paper guides with both sides of the stack.
 

Loading Paper in the Multi-purpose Tray2-62
Loading and Outputting Paper
2
IMPORTANT
Be sure to align the paper guides with the width of the paper. If the paper guides 
are too loose or too tight, this may result in misfeeds or paper jams.
7Register the size of the loaded custom size paper using the 
following procedure.
When printing custom size paper, you need to register the custom paper size in 
the printer driver previously.
NOTE
To specify a custom paper size, display the following dialog box.
-For...

2-63
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
8Display the [Page Setup] sheet, then click [Custom Paper 
Size].
9Specify the following options as needed.
[Paper List]: Displays [Name] and [Size] of standard paper sizes and added 
custom paper sizes.
[Name of Custom Paper 
Size]:You can enter the name of the custom paper size to be added. 
Up to 31 characters can be entered.
[Unit]: Specify the unit ([Millimeter] or [Inch]) to be used when setting 
the custom paper size....

Loading Paper in the Multi-purpose Tray2-64
Loading and Outputting Paper
2
10Click [Register].
NOTE
On Windows 98/Me, up to 30 custom paper sizes can be added. On Windows 
2000/XP/Server 2003/Vista, the number depends on the system environment.
11Confirm the settings, then click [OK].
Next, configure the printer driver (See p. 2-65).
 

2-65
Loading and Outputting Paper
2
Setting Up the Printer Driver and Printing
Setting Up the Printer Driver and Printing
After loading paper in the paper source, configure the printer driver using the 
following procedure before printing.
NOTE
For more details on the settings for the printer driver, see Online Help. For details on 
methods for displaying Online Help, see How to Use Online Help, on p. 4-75.
1Select [Print] from the [File] menu in the application. Select 
the name of this printer for...

Setting Up the Printer Driver and Printing2-66
Loading and Outputting Paper
2
2Display the [Page Setup] sheet, then from [Page Size], select 
the size of a document that you have created with the 
application.
NOTE
•If you set [Page Size] to [Index Card], the following message appears, and [Paper 
Type] is automatically specified.
•If you set [Page Size] to [Envelope DL], [Envelope COM10], [Envelope C5], 
[Envelope Monarch], or [Envelope B5], the following message appears, and [Paper 
Type] is...

2-67
Loading and Outputting Paper
2
Setting Up the Printer Driver and Printing
3From [Output Size], select the size of the loaded paper as 
needed.
Leave the setting at [Match Page Size] when the paper size specified for [Page 
Size] and that of the paper loaded in the paper source are the same, since there 
is no need to change the setting.
IMPORTANT
The print will be automatically reduced or enlarged to fit on the page when the 
settings for [Page Size] and [Output Size] are different.