Canon Laser Shot Lbp3500 User Guide

Loading Paper in a Paper Cassette2-38
Loading and Outputting Paper
2
4While holding the lock release lever of the side paper guides, 
slide the guides to the size mark for the loaded paper.
The side paper guides move together.
5While holding the lock release lever of the rear paper guide, 
slide the guide to the size mark for the loaded paper.
6Hold down the paper as shown in the figure, make sure that 
the paper stack does not exceed the load limit marks (A), and 
then set it under the hooks (B) on the...

2-39
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
Cassette 1
Cassette 2
IMPORTANT
The paper capacity of Cassette 1 is approximately 250 sheets of plain paper (64 g/
m2), and that of Cassette 2 is approximately 500 sheets of plain paper (64 g/m2). 
Be sure that the paper stack does not exceed the load limit marks on the paper 
guides. If the paper stack exceeds the load limit marks, this may result in misfeeds.
(B)(B)
(A)
(A)(B)
(A)
(B)(B)
(A)
(B)
 

Loading Paper in a Paper Cassette2-40
Loading and Outputting Paper
2
7Holding the tab of the paper size setting switch (A), set it to 
the left.
8Set the paper size register dial (A) to Custom.
IMPORTANT
Make sure that the paper size register dial is set to Custom before setting the 
paper cassette in the printer. If the paper size that the paper size register dial is 
indicating does not correspond with the size of the loaded paper, this may result in 
printer malfunction.
Cassette 1 Cassette 2
Cassette...

2-41
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
9Set the paper cassette in the printer at an angle as shown in 
the figure 
aa a a, then push it into the printer or the paper feeder 
gently and horizontally 
bb b b.
Push the paper cassette into the printer firmly until the front side of the paper 
cassette is flush with the front surface of the printer.
CAUTION
When setting the paper cassette in the printer, be careful not to catch your 
fingers.
Then, specify the paper feed direction...

Loading Paper in a Paper Cassette2-42
Loading and Outputting Paper
2
11From the [Options] menu in the Printer Status Window, select 
[Device Settings] ➞ [Cassettes Settings].
The [Cassettes Settings] dialog box is displayed.
12Specify the paper feed direction (the loading orientation) of 
the custom size paper loaded in the paper cassette in [Feed 
Direction of Custom Paper Size] in the [Cassettes Settings] 
dialog box, and then click [OK].
13Register the size of the loaded custom size paper using the...

2-43
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
NOTE
To specify a custom paper size, display the following dialog box.
-For Windows 2000/XP/Server 2003/Vista
Display the [Document Properties] dialog box from the [Printers and Faxes] folder 
(the [Printers] folder for Windows 2000/Vista).
-For Windows 98/Me
Display the [Printer Properties] dialog box from the [Printers] folder.
14Display the [Page Setup] sheet, then click [Custom Paper 
Size].
15Specify the following options as...

Loading Paper in a Paper Cassette2-44
Loading and Outputting Paper
2
[Unit]:  Specify the unit ([Millimeter] or [Inch]) to be used 
when setting the custom paper size.
[Paper Size]:  Specify the height and width of the custom paper 
size ([Height]
  [Width]). Specify the custom 
paper size in portrait orientation ([Height]
  
[Width]) within user-definable sizes.
16Click [Register].
NOTE
On Windows 98/Me, up to 30 custom paper sizes can be added. On Windows 
2000/XP/Server 2003/Vista, the number depends...

2-45
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
Loading Paper in the Multi-purpose Tray
The multi-purpose tray can be loaded with up to approximately 100 sheets of plain 
paper (64 g/m2) at sizes of A3, B4, A4, B5, A5, Ledger (11 x 17), Legal, Letter, 
Executive, Index Card, 8K, 16K and plain paper of the following custom paper 
sizes.
•When loading paper in portrait orientation: Width 98.0 to 312.0 mm; Length 148.0 
to 470.0 mm
•When loading paper in landscape orientation:...

Loading Paper in the Multi-purpose Tray2-46
Loading and Outputting Paper
2
Loading Plain Paper, Heavy Paper, Transparencies, or 
Labels in the Multi-purpose Tray
Perform the following procedure to load plain paper, heavy paper, transparencies, 
or labels in the multi-purpose tray.
Load paper in portrait or landscape orientation. Depending on the size of the paper 
to be loaded, the loading orientation differs as follows:
1Open the multi-purpose tray.
Holding the blue opening at the center of the printer,...

2-47
Loading and Outputting Paper
2
Loading Paper in the Multi-purpose Tray
2Pull out the auxiliary tray.
IMPORTANT
Be sure to pull out the auxiliary tray when loading paper in the multi-purpose tray.
3When loading long-size paper such as A3, B4, etc, open the 
tray extension.