Canon Laser Shot Lbp3500 User Guide

Setting Up the Printer Driver and Printing2-68
Loading and Outputting Paper
2
4Display the [Paper Source] sheet, then select [Paper Source].
Specify the same setting as the one for [Paper Source], although the setting for 
[Paper Source] changes to ones such as [First Page] or [Other Pages] when 
[Paper Selection] is set to other than [Same Paper for All Pages].
5Select the paper type specified in [Paper Type].
 

2-69
Loading and Outputting Paper
2
Setting Up the Printer Driver and Printing
NOTE
Load paper based on the following [Paper Type] criteria:
*1If paper curls excessively when printed with [Plain Paper] selected, select [Plain Paper L].
*2If you want to improve the fixation when printed with [Plain Paper] selected, select [Plain Paper H].
*3If you want to improve the fixation when printed with [Heavy Paper L] selected, select [Heavy Paper
H].
*
4When printing envelopes, the printer automatically applies the...

Setting Up the Printer Driver and Printing2-70
Loading and Outputting Paper
2
7Click [OK] to start printing.
 

2-71
Loading and Outputting Paper
2
2-sided Printing
2-sided Printing
This printer allows you to perform automatic 2-sided printing by installing the 
optional duplex unit. Plain paper at sizes of A3, B4, A4, B5, A5, Legal, Ledger (11 x 
17), Letter, Executive, 8K, and 16K can be used for automatic 2-sided printing. 
Custom size paper of the following sizes can also be used for automatic 2-sided 
printing.
•When loading paper in portrait orientation: Width 210.0 to 297.0 mm; Length 
210.0 to 431.8 mm...

2-sided Printing2-72
Loading and Outputting Paper
2
Automatic 2-sided Printing
1Load paper in the multi-purpose tray or paper cassette.
NOTE
On automatic 2-sided printing, the reverse side of the paper is printed first, 
therefore the paper should be loaded in the opposite orientation to that for 1-sided 
printing. When printing paper such as a letterhead in which faces and directional 
orientations specified, load the paper using the following procedure:
-When loading paper at a size of A4, B5, A5,...

2-73
Loading and Outputting Paper
2
2-sided Printing
-When loading paper at a size of A3, B4,Ledger (11 x 17), or Legal in the paper 
cassette in portrait orientation, load the paper so that the printing side is facing 
up, as shown in the following figures.
(: Feeding direction)
 

2-sided Printing2-74
Loading and Outputting Paper
2
-When loading paper at a size of A4, B5, A5, Letter, Executive, or 16K in the 
multi-purpose tray in landscape orientation, load the paper so that the printing 
side is facing down, as shown in the following figures.
(: Feeding direction)
 

2-75
Loading and Outputting Paper
2
2-sided Printing
-When loading paper at a size of A3, B4, Ledger (11 x 17), Legal, or 8K in the 
multi-purpose tray in portrait orientation, load the paper so that the printing side is 
facing down, as shown in the following figures.
(: Feeding direction)
 

2-sided Printing2-76
Loading and Outputting Paper
2
2Select [Print] from the [File] menu in the application. Select 
the name of this printer for [Name] or [Printer Name], and then 
click [Properties].
3Display the [Page Setup] sheet, then from [Page Size], select 
the size of a document that you have created with the 
application.
 

2-77
Loading and Outputting Paper
2
2-sided Printing
4From [Output Size], select the size of the loaded paper as 
needed.
Leave the setting at [Match Page Size] when the page size and the size of the 
paper loaded in the paper source are the same, since there is no need to change 
the setting.
IMPORTANT
The print will be automatically reduced or enlarged to fit on the page when the 
settings for [Page Size] and [Output Size] are different.
5Display the [Finishing] sheet and select [2-sided Printing] for...