Canon Laser Shot Lbp3500 User Guide
Here you can view all the pages of manual Canon Laser Shot Lbp3500 User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 151
![Page 151
3-22Installing the CAPT Software
Setting Up the Printing Environment
3
11Click [Finish].
IMPORTANT
If you are using a computer with Windows XP Service Pack 2 or another operating
system equipped with Windows Firewall as the print server, you need to configure
Windows Firewall to unblock communication with the client computers. (See p.
8-12)
The installation of the USB class driver (supplied with an operating system) and the
printer driver is completed.
For Windows 2000
1Make sure that the printer and...](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-150.png "Page 151
3-22Installing the CAPT Software
Setting Up the Printing Environment
3
11Click [Finish].
IMPORTANT
If you are using a computer with Windows XP Service Pack 2 or another operating
system equipped with Windows Firewall as the print server, you need to configure
Windows Firewall to unblock communication with the client computers. (See p.
8-12)
The installation of the USB class driver (supplied with an operating system) and the
printer driver is completed.
For Windows 2000
1Make sure that the printer and...")
3-22Installing the CAPT Software Setting Up the Printing Environment 3 11Click [Finish]. IMPORTANT If you are using a computer with Windows XP Service Pack 2 or another operating system equipped with Windows Firewall as the print server, you need to configure Windows Firewall to unblock communication with the client computers. (See p. 8-12) The installation of the USB class driver (supplied with an operating system) and the printer driver is completed. For Windows 2000 1Make sure that the printer and...
Page 152
![Page 152
3-23Installing the CAPT Software
Setting Up the Printing Environment
3
3Connect the A-type (flat) end of the USB cable to the USB port
on the computer.
4Press of the power switch to turn the printer ON.
5Turn the computer on and start up Windows 2000.
6Log on as a member of Administrators.
The [Found New Hardware Wizard] dialog box appears.
NOTE
Full Control Permission is required for the installation of the printer driver.](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-151.png "Page 152
3-23Installing the CAPT Software
Setting Up the Printing Environment
3
3Connect the A-type (flat) end of the USB cable to the USB port
on the computer.
4Press of the power switch to turn the printer ON.
5Turn the computer on and start up Windows 2000.
6Log on as a member of Administrators.
The [Found New Hardware Wizard] dialog box appears.
NOTE
Full Control Permission is required for the installation of the printer driver.")
3-23Installing the CAPT Software Setting Up the Printing Environment 3 3Connect the A-type (flat) end of the USB cable to the USB port on the computer. 4Press of the power switch to turn the printer ON. 5Turn the computer on and start up Windows 2000. 6Log on as a member of Administrators. The [Found New Hardware Wizard] dialog box appears. NOTE Full Control Permission is required for the installation of the printer driver.
Page 153
![Page 153
3-24Installing the CAPT Software
Setting Up the Printing Environment
3
7Click [Next].
8Select [Search for a suitable driver for my device
(recommended)], then click [Next].
NOTE
[Unknown] may be displayed as the name of the device.](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-152.png "Page 153
3-24Installing the CAPT Software
Setting Up the Printing Environment
3
7Click [Next].
8Select [Search for a suitable driver for my device
(recommended)], then click [Next].
NOTE
[Unknown] may be displayed as the name of the device.")
3-24Installing the CAPT Software Setting Up the Printing Environment 3 7Click [Next]. 8Select [Search for a suitable driver for my device (recommended)], then click [Next]. NOTE [Unknown] may be displayed as the name of the device.
Page 154
![Page 154
3-25Installing the CAPT Software
Setting Up the Printing Environment
3
9Clear the [Floppy disk drives] check box and the [CD-ROM
drives] check box, select the [Specify a location] check box,
and then click [Next].
10Insert the supplied LBP3500 User Software CD-ROM into
the CD-ROM drive, and then click [Browse].
If CD-ROM Setup appears, click [Exit].
11Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF],
then click [Open].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive...](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-153.png "Page 154
3-25Installing the CAPT Software
Setting Up the Printing Environment
3
9Clear the [Floppy disk drives] check box and the [CD-ROM
drives] check box, select the [Specify a location] check box,
and then click [Next].
10Insert the supplied LBP3500 User Software CD-ROM into
the CD-ROM drive, and then click [Browse].
If CD-ROM Setup appears, click [Exit].
11Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF],
then click [Open].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive...")
3-25Installing the CAPT Software Setting Up the Printing Environment 3 9Clear the [Floppy disk drives] check box and the [CD-ROM drives] check box, select the [Specify a location] check box, and then click [Next]. 10Insert the supplied LBP3500 User Software CD-ROM into the CD-ROM drive, and then click [Browse]. If CD-ROM Setup appears, click [Exit]. 11Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF], then click [Open]. The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive...
Page 155
![Page 155
3-26Installing the CAPT Software
Setting Up the Printing Environment
3
12Make sure that the folder to be browsed is displayed for [Copy
manufacturers files from], and then click [OK].
13Click [Next].
Copying files is started.
NOTE
If the [Digital Signature Not Found] dialog box appears, click [Yes].
14Click [Finish].](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-154.png "Page 155
3-26Installing the CAPT Software
Setting Up the Printing Environment
3
12Make sure that the folder to be browsed is displayed for [Copy
manufacturers files from], and then click [OK].
13Click [Next].
Copying files is started.
NOTE
If the [Digital Signature Not Found] dialog box appears, click [Yes].
14Click [Finish].")
3-26Installing the CAPT Software Setting Up the Printing Environment 3 12Make sure that the folder to be browsed is displayed for [Copy manufacturers files from], and then click [OK]. 13Click [Next]. Copying files is started. NOTE If the [Digital Signature Not Found] dialog box appears, click [Yes]. 14Click [Finish].
Page 156
3-27Installing the CAPT Software Setting Up the Printing Environment 3 The installation of the USB class driver (supplied with an operating system) and the printer driver is completed. For Windows 98/Me The screen shots used in this section are from Windows Me. 1Make sure that the printer and computer are OFF. 2Connect the B-type (square) end of the USB cable to the USB connector on the printer. 3Connect the A-type (flat) end of the USB cable to the USB port on the computer.
Page 157
![Page 157
3-28Installing the CAPT Software
Setting Up the Printing Environment
3
4Press of the power switch to turn the printer ON.
5Turn the computer on and start up Windows 98/Me.
The [Add New Hardware Wizard] dialog box appears.
●For Windows Me
If the following dialog box appears, proceed to Step 6.
If the following dialog box appears, proceed to Step 13.](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-156.png "Page 157
3-28Installing the CAPT Software
Setting Up the Printing Environment
3
4Press of the power switch to turn the printer ON.
5Turn the computer on and start up Windows 98/Me.
The [Add New Hardware Wizard] dialog box appears.
●For Windows Me
If the following dialog box appears, proceed to Step 6.
If the following dialog box appears, proceed to Step 13.")
3-28Installing the CAPT Software Setting Up the Printing Environment 3 4Press of the power switch to turn the printer ON. 5Turn the computer on and start up Windows 98/Me. The [Add New Hardware Wizard] dialog box appears. ●For Windows Me If the following dialog box appears, proceed to Step 6. If the following dialog box appears, proceed to Step 13.
Page 158
![Page 158
3-29Installing the CAPT Software
Setting Up the Printing Environment
3
●For Windows 98
If the following dialog box appears, click [Next], then proceed to Step 6.
If the following dialog box appears, click [Next], then proceed to Step 13.
6Select [Specify the location of the driver (Advanced)], then
click [Next].
For Windows 98: Select [Search for the best driver for your device.
(Recommended).], then click [Next].
7Insert the supplied LBP3500 User Software CD-ROM into
the CD-ROM drive.
If CD-ROM...](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-157.png "Page 158
3-29Installing the CAPT Software
Setting Up the Printing Environment
3
●For Windows 98
If the following dialog box appears, click [Next], then proceed to Step 6.
If the following dialog box appears, click [Next], then proceed to Step 13.
6Select [Specify the location of the driver (Advanced)], then
click [Next].
For Windows 98: Select [Search for the best driver for your device.
(Recommended).], then click [Next].
7Insert the supplied LBP3500 User Software CD-ROM into
the CD-ROM drive.
If CD-ROM...")
3-29Installing the CAPT Software Setting Up the Printing Environment 3 ●For Windows 98 If the following dialog box appears, click [Next], then proceed to Step 6. If the following dialog box appears, click [Next], then proceed to Step 13. 6Select [Specify the location of the driver (Advanced)], then click [Next]. For Windows 98: Select [Search for the best driver for your device. (Recommended).], then click [Next]. 7Insert the supplied LBP3500 User Software CD-ROM into the CD-ROM drive. If CD-ROM...
Page 159
![Page 159
3-30Installing the CAPT Software
Setting Up the Printing Environment
3
8Select [Search for the best driver for your device.
(Recommended).], clear the [Removable Media (Floppy,
CD-ROM...)] check box, and then select the [Specify a
location] check box.
For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM
drives] check box, and then select the [Specify a location] check box.
9Click [Browse], then select the folder.
For Windows Me: Select [D:\English\USBPORT\WinMe], and then click...](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-158.png "Page 159
3-30Installing the CAPT Software
Setting Up the Printing Environment
3
8Select [Search for the best driver for your device.
(Recommended).], clear the [Removable Media (Floppy,
CD-ROM...)] check box, and then select the [Specify a
location] check box.
For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM
drives] check box, and then select the [Specify a location] check box.
9Click [Browse], then select the folder.
For Windows Me: Select [D:\English\USBPORT\WinMe], and then click...")
3-30Installing the CAPT Software Setting Up the Printing Environment 3 8Select [Search for the best driver for your device. (Recommended).], clear the [Removable Media (Floppy, CD-ROM...)] check box, and then select the [Specify a location] check box. For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM drives] check box, and then select the [Specify a location] check box. 9Click [Browse], then select the folder. For Windows Me: Select [D:\English\USBPORT\WinMe], and then click...
Page 160
![Page 160
3-31Installing the CAPT Software
Setting Up the Printing Environment
3
10Make sure that the folder to be browsed is displayed for
[Specify a location], and then click [Next].
11Click [Next].
Installation of the USB class driver starts.
12Click [Finish].
The printer is detected automatically. Please wait a moment.](http://img.usermanuals.tech/thumb/14/56526/w300_canon_laser_shot_lbp3500-user-guide-159.png "Page 160
3-31Installing the CAPT Software
Setting Up the Printing Environment
3
10Make sure that the folder to be browsed is displayed for
[Specify a location], and then click [Next].
11Click [Next].
Installation of the USB class driver starts.
12Click [Finish].
The printer is detected automatically. Please wait a moment.")
3-31Installing the CAPT Software Setting Up the Printing Environment 3 10Make sure that the folder to be browsed is displayed for [Specify a location], and then click [Next]. 11Click [Next]. Installation of the USB class driver starts. 12Click [Finish]. The printer is detected automatically. Please wait a moment.