Canon Imageclass Mf7470 User Guide

Sending Documents
4‑26

Original Type Selection
You can manually select the original type according to the type of image that you are 
scanning.
The following three original type modes are available for adjusting the image quality.
Text Mode
This mode is best suited for scanning text originals. Blueprints or pencil drawn originals 
can also be scanned clearly.
Text/Photo Mode
This mode is best suited for scanning originals containing both text and photos.
Photo Mode
This mode is best suited for scanning...

4‑27
Sending Documents

① Select the original type ([Text/Photo], 
[Photo], or [Text]).
The machine automatically adjusts the scan 
density to the level best suited to the quality 
of the original.
5 
①  Press [Light] or [Dark] to adjust the scan 
density.
Press [Light] to move the indicator to the 
left to make the density lighter, or press 
[Dark] to move it to the right to make the 
density darker.
②  Press [OK].
ƒ
„
ƒ
„
6  Press  (Start).
If the original is placed on the platen glass, 
follow...

Sending Documents
4‑28

Two-Sided Originals
You can set the machine to automatically turn over two‑sided originals placed in the feeder, 
so as to scan each side separately.
When you are scanning originals with a horizontal (landscape) orientat\
ion, such as LTRR, make sure to place 
them horizontally into the feeder. If these originals are placed vertica\
lly, the back sides of these originals are 
scanned upside down.
1 Press  (SEND).
2 Place your originals in the feeder.
3 
① Specify the...

4‑29
Sending Documents

To cancel the scan settings, press [Scan 
Settings], then press [Option], then 
[Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
–
–
 

Sending Documents
4‑30

Different Size Originals
This mode enables you to scan different size originals together.
The Different Size Originals mode cannot be used with the Document Size or Stamp mode.
If the originals are placed in the feeder, make sure that the different \
size originals are of the same weight 
(paper type).
Align the top edge of the originals with the back edge of the feeder or \
the platen glass if you are placing 
originals with different widths. (“Width” refers to the vertical \...

4‑31
Sending Documents

6 
7 Press  (Start).
If the original is placed on the platen glass, 
follow the instructions that appear on the 
touch panel display, then press  (Start) once 
for each original. When scanning is complete, 
press [Done].
Scanning starts.
The scanned data is sent to the specified 
destination when scanning is complete.
To cancel the scan settings, press [Scan 
Settings], then press [Option], then 
[Cancel].
To cancel all settings and return the 
machine to the Standard mode, press...

Sending Documents
4‑32

Specifying Destinations
This section describes how to specify a destination for a send job. You can select 
a destination stored in the Address Book or a one-touch button, or specify a new 
address. You can also recall the destinations and settings stored in the favorites 
buttons to check their contents, edit them, or delete them.
A maximum of 501 destinations can be specified at the same time. (Out of the 501 destinations, one new 
destination can be specified using the New...

4‑33
Sending Documents

Specifying a Fax Number
This mode enables you to specify a new fax number.
Ô
1 Press  (SEND).
2 Place your originals.
3 
① Press [New Address].
②  Press [Fax].
If no destination is displayed on the Send 
Basic Features screen, you can skip this step.
ƒ
„
ƒ
„
4 
①  Enter the recipient’s fax number (up to 120 
characters) using – (numeric keys), , 
and .
[Pause]: Press to insert a pause of several 
seconds in the fax number you are 
dialing. If you insert a pause within the...

Sending Documents
4‑34

② Press [OK]. 
You cannot insert a pause at the beginning 
of a number.
If you enter a pause at the end of the 
number, the pause is always 10 seconds 
long.
You can press  (Clear) to clear your entry.
If Confirm Entered Fax Numbers in Restrict 
Access to Destinations in System Setting 
is set to [On], you should enter the fax 
number again for confirmation. Enter 
the fax number you entered in step 2, 
then press [OK]. (See Chapter 8, “System 
Settings,” in the Reference...

4‑35
Sending Documents

Specifying an E-Mail Address (imageCLASS MF7480 Only)
This mode enables you to specify a new e‑mail address. You can enter the e‑mail message 
address directly from the keyboard on the touch panel display.
If you send a document via e‑mail, the document is sent as a file attached to an e‑mail message in the Color or 
B&W mode.
Ô
1 Press  (SEND).
2 Place your originals.
3 
① Press [New Address].
②  Press [E‑mail].
4 
①  Enter the e‑mail address (up to 120 
characters).
②  Press...