Canon Imageclass Mf7470 User Guide

Copying
3‑24

4 
① Press [Group].
②  Press [OK].
If you want to rotate the output sheet, 
press [Rotate] and proceed to step 5. 
Otherwise, press [OK] and skip to step 7.
5 
6 
①  Select [A4], [A4R], [B5], [B5R], [LTR], or 
[LTRR].
②  Press [OK].
[Rotate] can be selected only in the 
following cases:
If the available paper size is selected 
manually
If the available paper size is loaded 
in both the horizontal and vertical 
directions
The selected paper source must have 
Drawer Eligibility For APS/ADS...

3‑25
Copying

Two-Sided Copying
This mode enables you to make two-sided copies from one-sided or two-sided 
originals, or make one-sided copies from two-sided originals.
You may not be able to make two‑sided copies on some types of paper, depending on the paper.
If you are copying in the 2‑Sided mode, align the top edge of the original with the back edge of the platen 
glass (by the arrow in the top left corner), or with the back edge of \
the feeder.
The 2‑Sided mode you have selected is displayed...

Copying
3‑26

Making One-Sided Copies from Two-Sided Originals (2 ▶ 1-Sided)
This feature automatically turns over two‑sided originals placed in the feeder to make one ‑
sided copies on different sheets of paper.
CopiesOriginal
Making Two-Sided Copies from Facing Pages in a Book (Book ▶ 2-Sided)
This feature enables you to make two‑sided copies from facing pages, or from the front and 
back sides of a page in bound originals, such as books and magazines.
Place your original on the platen glass. The Book...

3‑27
Copying

1 to 2-Sided
This feature enables you to make two‑sided copies from one‑sided originals.
The 1 ▶ 2‑Sided mode cannot be used with the Two‑page Separation or Image Combination mode.
If there are an odd number of originals, the back side of the last copy \
is left blank.
If the 1 ▶ 2‑Sided mode is used with the Different Size Originals mode, the copies of different size originals 
will be printed as one‑sided copies on paper of their respective sizes. If you want to make two‑sided copies...

Copying
3‑28

5 6 Press  (Start).
If the original is placed on the platen glass, 
follow the instructions that appear on the 
touch panel display. Press  (Start) once for 
each original. When scanning is complete, 
press [Done]. 
To cancel this setting, press [2‑Sided], then 
press [Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
–
–
2 to 2-Sided
This feature enables you to make two ‑sided copies from two‑sided originals. If a two ‑sided 
original is placed...

3‑29
Copying

2
① Select the type of two‑sided orientation 
for the originals and the copies.
Details of each item are shown below.
Original
[Book Type]: The front and back sides of 
the original have the same top‑bottom 
orientation.
[Calendar Type]: The front and back 
sides of the original have opposite top‑
bottom orientations.
Copy
[Book Type]: The front and back sides 
of the copy will have the same top‑
bottom orientation.
[Calendar Type]: The front and back 
sides of the copy will have opposite...

Copying
3‑30

4 
To set the orientation of the 
originals :
1
2
① Select the orientation of the originals.
Details of each item are shown below.
[Book Type]: The front and back sides of 
the original have the same top‑bottom 
orientation.
[Calendar Type]: The front and back 
sides of the original have opposite top‑
bottom orientations.
②  Press [Done].
Ô
ƒ
„
ƒ
„
5 
6  Press  (Start).
To cancel this setting, press [2‑Sided], then 
press [Cancel].
To cancel all settings and return the 
machine to the...

3‑31
Copying

Book to 2-Sided 
This feature enables you to make two‑sided copies from facing pages, or from the front and 
back sides of a page in bound originals, such as books and magazines.
The Book ▶ 2‑Sided mode cannot be used with the 2‑page Separation, Image Combination, Binding Erase, or 
Different Size Originals mode.
Only LTR paper can be used for Book ▶ 2‑Sided copying.
If you select [Front/Back Two‑sided], the front side of the first two‑sided page and the back side of the last 
two‑sided...

Copying
3‑32

6 Press  (Start).
To copy the next two facing pages, turn the 
page of the original. Place your original on 
the platen glass, then press  (Start).
7 
To cancel this setting, press [2‑Sided], then 
press [Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
–
–
 

3‑33
Copying

Confirming Settings
Copy mode settings that you have specified, including those that are set from the 
Special Features screen, are all grouped together onto one screen so you can easily 
check them.
1 
2 
① Check the settings.
②  Press [Done].
A right triangle (▶) on a copy mode setting 
key indicates that more setting screens are 
available by pressing the key.
ƒ
„
ƒ
„