Canon Fax L390 User Guide

Loading Paper
4-4
Paper Handling4
3
Adjust the width slide guides or paper width guides to match the paper size.
4
Fan the paper stack first, then tap the edges on a flat surface to even the stack.
5
Load the paper stack in the cassette with the print side down.
When you load paper with a logo on, position the paper with the print side down (logo side) and load it so that the 
top of the paper feeds first in the cassette.
Make sure the paper stack does not exceed the load limit mark.
HOOKSLOAD LIMIT...

Loading Paper
4-5
Paper Handling4
6
Insert the cassette into the machine.NOTEIf you do not completely insert the cassette into the machine, paper jams may occur.
7
Specify the paper size and type.❑
Press [Menu] ➞ [OK].
❑
Press [ (-)] or [ (+)] to select  ➞ press [OK] twice.
❑
Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [OK] twice.
❑
Press [ (-)] or [ (+)] to select the appropriate paper type ➞ press [OK].
❑
Press [Stop/Reset] to return to standby mode.IMPORTANT•Do not load...

Loading Paper
4-6
Paper Handling4
2
Remove any curling from the envelopes by holding the edges diagonally and bending them gently.
3
Run a pen or other rounded object along the back flaps to flatten them.
The flaps should not bulge more than 5 mm.
4
Tap the edges on a flat surface to even the envelopes.
5
Pull out the cassette completely.
6
Pinch and slide the length slide guide to fit the size of the envelopes you want to load.IMPORTANTIf the slide guides are not adjusted correctly for the size of the...

Loading Paper
4-7
Paper Handling4
7
Load the envelopes with the print side down and the right edge (i.e., closer to the stamp) first.
If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it 
this way will result in a paper jam.
8
Pinch and slide the width slide guides to fit the envelopes.
Make sure the envelopes do not exceed the load limit mark.
9
Insert the cassette into the machine.NOTEIf you do not completely insert the cassette into the...

Loading Paper
4-8
Paper Handling4
Loading Paper in the Multi-Purpose Feeder
Use the multi-purpose feeder when you want to copy or print on the different paper which is in the 
cassette. Load paper one by one in the multi-purpose feeder.
NOTEThe paper in the multi-purpose feeder is fed prior to the paper in the cassette.
1
Slide the slide guides to fit the size of the paper you want to load.IMPORTANTIf the slide guides are not adjusted correctly for the size of the paper, the quality of your printouts may...

Loading Paper
4-9
Paper Handling4
3
Specify the paper size.❑
Press [Menu] ➞ press [OK].
❑
Press [ (-)] or [ (+)] to select  ➞ press [OK] twice.
❑
Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [OK] twice.NOTE•Select  for envelopes. For details on loading an envelope in the multi-purpose feeder, see “Loading 
an Envelope in the Multi-Purpose Feeder,” on p. 4-9.•When  is selected, you can specify vertical and horizontal sizes of the paper in the following ranges:
- : 127 mm to 356 mm
-...

Loading Paper
4-10
Paper Handling4
IMPORTANTIf the slide guides are not adjusted correctly for the size of the envelope, the quality of your printouts may be 
adversely affected.
2
Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e., 
closer to the stamp) first.
If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it 
this way will result in a paper jam.
3
Specify the paper size.❑
Press [Menu]...

Loading Paper
4-11
Paper Handling4
Orientation of the Document and the Paper Loading
When you load a document in the ADF, the orientation of the document and the orientation of the paper 
in the cassette or in the multi-purpose feeder are as shown below.
DOCUMENT
COPY
PAPER
CASSETTE MULTI-PURPOSE 
FEEDER
 

Selecting the Paper Output Area
4-12
Paper Handling4
Selecting the Paper Output Area
Face down paper output delivers paper with the printed side down on the output tray. Face up paper 
output delivers paper with the printed side up out of the face up paper output. Select the area 
depending on your purpose by opening or closing the rear cover.
Open the rear cover for face up paper output, or close the rear cover for face down paper output.
IMPORTANTDo not open or close the rear cover while copying and...

Selecting the Paper Output Area
4-13
Paper Handling4
Face Down Paper Output Area
The paper is delivered with the printed side down on the output tray. 
Paper is stacked in printed order. 
Close the rear cover.
IMPORTANT•Do not place the delivered paper back on the output tray. Doing so may result in paper jams.•Do not place objects other than paper on the output tray. Doing so may result in paper jams.•It is recommended to fold up the document feeder when printing many pages.
Face Up Paper Output Area...