Canon Eos Rebel T3 1100d Instruction Manual

							61
To photograph a moving subject, whether it is a child running or a 
moving vehicle, use the  (Sports) mode.
  Use a telephoto lens.
Using a telephoto lens is recommende d so you can shoot from afar.
  Use the center AF point to focus.
Aim the center AF point over the subject, then press the shutter 
button halfway to autofocus. Duri ng autofocusing, the beeper will 
continue beeping softly. If focus cannot be achieved, the focus 
confirmation light < o> will blink.
When you want to take the picture, press the shutter button 
completely. If you hold down the shut ter button, continuous shooting 
(max. approx. 3 shots per sec. in  JPEG quality) and autofocusing 
will take effect.
5  Shooting Moving Subjects
Shooting Tips
Under low light when camera shake is prone to oc cur, the viewfinder’s 
shutter speed display on th e bottom left will blink. Hold the camera steady 
and shoot.
COPY  
						

							62
To shoot someone at night and obtain a natural-looking exposure in the 
background, use the  (Night Portrait) mode.
  Use a wide-angle lens and a tripod.
When using a zoom lens, use the  wide-angle end to obtain a wide 
night view. Also, use a tri pod to prevent camera shake.
  Keep the person within 5 meters/16.4 feet from the camera.
Under low light, the built-in flash wi ll fire automatically to obtain a 
good exposure of the person. The ma ximum effective distance of the 
built-in flash is 5 meters/1 6.4 feet from the camera.
  Shoot also with < 1> (Full Auto).
Since camera shake is prone to occu r with night shots, shooting also 
with < 1> (Full Auto) is recommended.
6 Shooting Portraits at Night
Shooting Tips
  Tell the subject to keep st ill even after the flash fires.
  If you use the self-timer together with flash, the self-timer lamp will light 
briefly after the picture is taken.
COPY  
						

							63
In Basic Zone modes when the shooting 
settings screen is displayed, you can 
press the  button to display the 
Quick Control screen. The table below 
indicates the functions that can be set 
with the Quick Control screen in each 
Basic Zone mode.
1 Set the Mode Dial to a Basic Zone mode.
2 Press the < Q> button. (7 )
XThe Quick Control screen will appear.
3 Set the function.
 Press the < V> key to select a function. (Step not necessary in 
the 1 /7 mode.)
XThe selected function and Feature  guide (p.47) will be displayed.
 Press the  key or turn the  dial to change the setting.
Settable Functions in Basic Zone Modeso: Set automatically   k: User selectable    : Not selectable
*Use the < V> key to set the number  of continuous shots.
Q Quick Control
Function1(p.50)7(p.54)C(p.55)2(p.58)3(p.59)4(p.60)5(p.61)6(p.62)
Drive 
mode u
: Single shooting
kkkkkk
i: Continuous shootingkkk
Self-
timer j
: 10 sec.kkkkkkkk
q : Continuous*kkkkkkkk
Flash firing Automatic firing
okooo
Flash on (Fires at all times)k
Flash offokoo
Shoot by ambience selection (p.64)kkkkkk
Shoot by lighting or scene type (p.67)kkkk
Blurring/sharpening t
he background (p.56)k
Example: Portrait mode
COPY  
						

							64
Except in the  (Full Auto) and < 7> (Flash Off) Basic Zone 
modes, you can select the ambience for shooting.
1Set the Mode Dial to any of the 
following modes: < C>, < 2>, 
< 3 >, ,  or .
2Display the Live View image.
 With the Live View image displayed, 
you can see the ambience effect.
  Press the < A> button to switch to 
Live View shooting.
3On the Quick Control screen, 
select the desired ambience.
  Press the < Q> button ( 7).
  Press the < V> key to select 
[Standard setting ]. [Shoot by 
ambience selection ] will appear on 
the screen’s bottom.
 
Press the  key or turn the  
dial to select the desired ambience.
XThe LCD monitor will show how the image 
will look with the  selected ambience.
Shoot by Ambience Selection
Ambience17C23456Ambience Effect
(1) Standard settingkkkkkkNo setting
(2) Vivid
kkkkkkLow / Standard / Strong
(3) Soft
kkkkkkLow / Standard / Strong
(4) Warm
kkkkkkLow / Standard / Strong
(5) Intense
kkkkkkLow / Standard / Strong
(6) Cool
kkkkkkLow / Standard / Strong
(7) Brighter
kkkkkkLow / Medium / High
(8) Darker
kkkkkkLow / Medium / High
(9) Monochrome
kkkkkkBlue / B/W / Sepia
COPY  
						

							65
Shoot by Ambience Selection
4Set the ambience effect.
 Press the < V> key to select the 
effect bar so that [ Effect] appears at 
the bottom.
  Press the < U> key or turn the 
< 6 > dial to select the desired 
effect.
5Take the picture.
  To shoot while the Live View image is 
displayed, press the shutter button.
  To return to viewfinder shooting, 
press the < A> button to exit Live 
View shooting. Then press the shutter 
button completely to take the picture.
  If you change the  shooting mode or 
set the power switch to < 2>, the 
setting will revert back to [ Standard 
setting].
  The Live View image shown with th e ambience setting applied will not 
look exactly the same as the actual photo.
  Using flash may minimize  the ambience effect.
  In bright outdoors, the  Live View image you see  on the screen might not 
have exactly the same br ightness or ambience as the actual photo. Set 
[ 6  LCD brightness ] to 4 and look at the Li ve View image while the 
screen is unaffected by stray light.
If you don’t want the Live View im age to be displayed when setting 
functions, press the  button after step 1. When you press the < Q> 
button, the Quick Control screen  is displayed and you can set [Shoot by 
ambience selection ] and [Shoot by lighting or scene ], then shoot with 
the viewfinder.
COPY  
						

							Shoot by Ambience Selection
66 Ambience Settings
(1)Standard setting
Standard image characteristics fo r the respective shooting mode. 
Note that < 2> has image characteristi cs geared for portraits and 
< 3 > is geared for landscapes. Each  ambience is a modification of 
the respective shooting mode’s image characteristics.
(2) Vivid
The subject will look sharp and vi vid. It makes the photo look more 
impressive than with [ Standard setting].
(3) Soft
The subject will look softer and mo re dainty. Good for portraits, pets, 
flowers, etc.
(4) Warm
The subject will look softer with warmer colors. Good for portraits, 
pets, and other subjects to which you want to give a warm look.
(5) Intense
While the overall brightness is slightly lowered, the subject is 
emphasized for a more intense feeling. Makes the human or living 
subject stand out more.
(6) Cool
The overall brightness is slightly lo wered with a cooler color cast. A 
subject in the shade will look more calm and impressive.
(7) Brighter
The picture will look brighter.
(8) Darker
The picture will look darker.
(9) Monochrome
The picture will be monochrome. You can select the monochrome 
color to be black and white,  sepia, or blue. When [Monochrome] is 
selected, < 0> will appear in the viewfinder.
COPY  
						

							67
In the  (Portrait), < 3> (Landscape), < 4> (Close-up), and < 5> 
(Sports) Basic Zone modes, you can shoot while the settings match the 
lighting or scene type. Normally, [ Default setting] is adequate, but if the 
settings match the lighting condition or  scene, the picture will look more 
accurate to your eye.
For Live View shooting, if you set both [ Shoot by lighting or scene 
type ] and [Shoot by ambience selection ] (p.64), you should first set 
[Shoot by lighting or scene type ]. This will make it easier to see the 
resulting effect on the LCD monitor.
1Set the Mode Dial to any of the 
following modes: < 2> < 3> 
< 4> 
2Display the Live View image.
 With the Live View image displayed, 
you can see the resulting effect.
  Press the < A> button to switch to 
Live View shooting.
Shoot by Lighting or Scene Type
Lighting or Scene17C23456
(1) Default settingkkkk
(2) Daylightkkkk
(3) Shadekkkk
(4) Cloudykkkk
(5) Tungsten lightkkk
(6) Fluorescent lightkkk
(7) Sunsetkkkk
COPY  
						

							Shoot by Lighting or Scene Type
68
3On the Quick Control screen, 
select the lighting or scene type.
 Press the < Q> button ( 7).
  Press the < V> key to select 
[Default setting ]. [Shoot by lighting 
or scene type ] will appear on the 
screen’s bottom.
  Press the < U> key or turn the 
< 6 > dial to select the desired 
lighting or scene type.
XThe LCD monitor will show how the 
image will look with the selected 
lighting or scene type.
4Take the picture.
  To shoot while the Live View image is 
displayed, press the shutter button.
  To return to the viewfinder image, 
press the < A> button to exit Live 
View shooting. Then press the shutter 
button completely to take the picture.
  If you change the  shooting mode or 
set the power switch to < 2>, the 
setting will revert back to [ Default 
setting].
  If you use flash, the se tting will switch to [Default setting]. (However, the 
shooting information will  display the lighting or scene type that was set.)
 
If you want to set this together with [Shoot by ambience selection], set 
the [Shoot by lighting or scene type] which best matches the ambience 
you have set. In the case of [Sunset] for example, warm colors will 
become prominent so the ambience you set might not work well.
If you don’t want the Live View im age to be displayed when setting 
functions, press the < Q> button after step  1. Pressing the  button will 
display the Quick  Control screen. Yo u can then set [Shoot by lighting or 
scene type ] and shoot through the viewfinder.
COPY  
						

							69
Shoot by Lighting or Scene Type
Lighting or Scene Type Settings
(1)Default setting
The default setting.
(2) Daylight
For subjects under sunlight. Gives  more natural-looking blue skies 
and greenery and reproduces lig ht-colored flowers better.
(3) Shade
For subjects in the shade. Suitable  for skin tones, which may look 
too bluish, and for light-colored flowers.
(4) Cloudy
For subjects under overcast skies. Makes skin tones and 
landscapes, which may otherwise look dull on a cloudy day, look 
warmer. Also effective for light-colored flowers.
(5) Tungsten light
For subjects lit under tungsten lig hting. Reduces the reddish-orange 
color cast caused by tungsten lighting.
(6) Fluorescent light
For subjects under fluorescent lighting. Suited for all types of 
fluorescent lighting.
(7) Sunset
Suitable when you want to capture  the sunset’s impressive colors.
COPY  
						

							70
The easiest way to playback images is explained below. For more 
details on the playback procedure, see page 175.
1Playback the image.
 When you press the < x> button, the 
last image captured will be displayed.
2Select an image.
  To view images starting with the last 
image, press the < Y> key. To view 
images starting with the first (oldest) 
image, press the < Z> key.
  Each time you press the < B> 
button, the display format will change.
3Exit the image playback.
  Press the < x> button to exit the 
image playback and return to the 
shooting settings display.
x  Image Playback
With basic information
Histogram Basic information + 
Image quality/Playback number
Shooting information display
COPY