Canon Eos Rebel T3 1100d Instruction Manual

							151
Movie Shooting Cautions
Playback and TV connection If the brightness change s during movie shooting,  that part might look 
momentarily still when  you playback the movie.
  If you connect the  camera to a TV set with an HDMI cable (p.191) and 
shoot a movie, the movie being shot wi ll be displayed at a small size on 
the TV. But the movie will still be  properly recorded in High-Definition 
(HD) quality.
  If you connect the  camera to a TV set and shoot a movie, the TV will not 
output any sound during  the shooting. However, the sound will be 
properly recorded.
COPY  
						

							152
COPY  
						

							153
Handy Features
 Silencing the Beeper (p.154)
  Card Reminder (p.154)
  Setting the Image Review Time (p.154)
  Setting the Auto Power-off Time (p.155)
  Adjusting the LCD Monitor Brightness (p.155)
  Creating and Selectin g a Folder (p.156)
  File Numbering Methods (p.158)
  Setting Copyright Information (p.160)
  Auto Rotation of Vertical Images (p.162)
  Checking Camera Settings (p.163)
  Reverting the Camera to the Default Settings (p.164)
  Turning the LCD Monitor Off/On (p.166)
  Changing the Shooting Setti ngs Screen Color (p.166)
  Setting the Flash (p.167)
  Appending Dust Delete Data (p.171)
  Manual Sensor Cleaning (p.173)
COPY  
						

							154
You can prevent the beeper from sounding when focus is achieved or 
during self-timer operation.Under the [1] tab, select [Beep ], then 
press < 0>. Select [ Disable], then 
press < 0>.
This prevents shooting if there is no card in the camera. Under the [1] tab, select [Release 
shutter without card ], then press 
< 0 >. Select [Disable], then press 
< 0 >.
If there is no card in stalled and you press 
the shutter button, “ Card” will be 
displayed in the viewfinder, and you 
cannot release the shutter.
You can set how long the image is  displayed on the LCD monitor 
immediately after capture. If [ Off] is set, the image will not be displayed 
immediately after image capture. If [Hold ] is set, the image review will 
be displayed up until the [ Auto power off] time.
During image review, if you operat e any camera controls such as 
pressing the shutter button halfw ay, the image review will end.
Under the [ 1] tab, select [Image 
review ], then press < 0>. Select the 
desired setting, then press < 0>.
Handy Features
3  Silencing the Beeper
3 Card Reminder
3 Setting the Image Review Time
COPY  
						

							155
Handy Features
To save battery power, the camera turns off automatically after the set 
time of idle operation elapses. Y ou can set this auto power-off time. 
When the camera has turned off due  to auto power off, you can wake it 
up by pressing the shutter button  halfway or pressing any of the 
following buttons: < M>, , < A>, etc.
If [Off] has been set, either turn off the camera yourself or press 
the < B> button to turn off the LCD monitor to save battery 
power.
Even if [Off] has been set and th e camera is not used for 30 min., 
the LCD monitor will turn off auto matically. To turn on the LCD 
monitor again, press the < B> button.
Under the [ 5] tab, select [ Auto power 
off], then press < 0>. Select the desired 
setting, then press < 0>.
You can adjust the brightness of the LCD monitor to make it easier to read.
Under the [ 6] tab, select [LCD 
brightness ], then press < 0>. With the 
adjustment screen displayed, press the 
< U > key to adjust the brightness, then 
press < 0>.
When checking the exposure of an 
image, set the LCD monitor brightness to 
4 and prevent the ambient light from 
affecting the reviewed image.
3  Setting the Auto Power-off Time
3 Adjusting the LCD Monitor Brightness
COPY  
						

							Handy Features
156
You can freely create and select the folder where the captured images 
are to be saved.
This is optional since a folder will be created automatically for saving\
 
captured images.
Create a Folder
1Select [Select folder].
  Under the [ 5] tab, select [ Select 
folder ], then press < 0>.
2Select [Create folder].
  Select [Create folder ], then press 
< 0 >.
3Create a new folder.
  Select [OK ], then press < 0>.
XA new folder with a higher one-up 
folder number is created.
3  Creating and Selecting a Folder
COPY  
						

							157
Handy Features
Selecting a Folder
 With the folder selection screen 
displayed, select a folder and press 
.
XThe folder where the captured 
images will be saved is selected.
  Subsequent captured images will be 
recorded into the selected folder.
Number of images
in folder
Folder name
Lowest file number
Highest file number
About FoldersAs with “ 100CANON ” for example, the folder name  starts with three digits 
(folder number) followed by five alphan umeric characters. A folder can contain 
up to 9999 images (file No. 0001 - 9999). When a  folder becomes full, a new 
folder with a higher one-up folder nu mber is created automatically. Also, if 
manual reset (p.159 ) is executed, a new folder wi ll be created automatically. 
Folders numbered from 10 0 to 999 can be created.
Creating Folders with a Personal ComputerWith the card open on the scre en, create a new folder named “ DCIM”. Open 
the DCIM folder and create as many  folders as necessary to save and 
organize your images . The folder name must follow the “ 100ABC_D” format 
where the first three digits is 100 -  999 followed by five alphanumeric 
characters. The five charac ters can be a combination of upper- or lower-case 
letters from A to Z, numera ls, and an underscore “_”. There can be no space in 
the folder name. Also, folder names cann ot have the same three-digit number 
such as “100ABC_D” and “100W_XYZ”  even if the letters are different.
COPY  
						

							Handy Features
158
The image files will be numbered from 0001 to 9999 in the order the 
images are taken, then saved in a folder. You can change how the file 
number is assigned.
The file number will appear on y our computer in this format: 
IMG_0001.JPG .
Under the [5] tab, select [ File 
numbering ], then press < 0>. The 
available settings are described below.  
Select one, then press < 0>.
  [Continuous]: The file numbering continues in sequence even 
after you replace the card or create a folder.
Even after you replace the card or create a new folder, the file 
numbering continues in sequence up  to 9999. This is convenient 
when you want to save image s numbered anywhere between 0001 
to 9999 in multiple cards or folder s into one folder in your personal 
computer.
If the replacement card or existi ng folder already contains images 
recorded previously, the file num bering of the new images might 
continue from the file numbering of the existing images in the card or 
folder. If you want to use continuou s file numbering, you should use 
a newly-formatted card each time.
3  File Numbering Methods
XXX-0051
Card-1
XXX-0052
Card-2
File numbering after 
replacing the card
Next sequential  file number
100
XXX-0051 101
XXX-0052Card-1
File numbering after  creating a folder
COPY  
						

							159
Handy Features
 [Auto reset]: The file numbering is reset to 0001 whenever you 
replace the card or create a folder.
Whenever the card is replaced or a new folder created, the file 
numbering starts from 0001. This is convenient if you want to 
organize images according to cards or folders.
If the replacement card or existi ng folder already contains images 
recorded previously, the file num bering of the new images might 
continue from the file numbering of the existing images in the card or 
folder. If you want to save images  with the file numbering starting 
from 0001, use a newly formatted card each time.
  [Manual reset]: To reset the file  numbering to 0001 manually or 
to start from file number 0001 in a new folder.
When you reset the file numbering manually, a new folder is created 
automatically and the file numbering of images saved to that folder 
starts from 0001.
This is convenient if you want to  use different folders for the images 
taken yesterday and the ones taken today, for example.
After the manual reset, the file num bering returns to continuous or 
auto reset. (There will be no Man ual reset confirmation screen.)
XXX-0051
Card-1
100-0001
Card-2
File numbering after 
replacing the card
File numbering is reset
100 XXX-0051 101
XXX-0001Card-1
File numbering after  creating a folder
If the file number in  folder No. 999 reaches 99 99, shooting will not be 
possible even if the card still has  storage capacity. The LCD monitor will 
display a message telling  you to replace the card. Replace it with a new 
card.
For both JPEG and  RAW images, the file name w ill start with “IMG_”. Movie 
file names will start with “MVI_”. Th e extension will be “.JPG” for JPEG 
images, “.CR2” for RAW images , and “. MOV” for movies.
COPY  
						

							Handy Features
160
When you set the copyright information, it will be appended to the image as Exif information.
1Select [Copyright information].
 Under the [ 7] tab, select [Copyright 
information ], then press < 0>.
2Select the option to be set.
  Select [Enter author’s name ] or 
[Enter copyright details ], then press 
< 0 >.
XThe text entry screen will appear.
  Select [Display copyright info. ] to 
check the copyright information 
currently set.
  Select [Delete copyright 
information ] to delete the copyright 
information currently set.
3Enter text.
  Refer to “Text Entry Procedure” on 
the next page and enter  the copyright 
information.
  Enter up to 63 alphanumeric 
characters and symbols.
4Exit the setting.
 After entering the text, press the 
 button to exit.
3 Setting Copyright Information N
COPY