Canon Eos Rebel T3 1100d Instruction Manual

							111
A Customizing Image Characteristics N
 Sharpness
Adjusts the sharpness of the image.
To make it less sharp, set it toward the  E end. The closer it is to E, 
the softer the image will look.
To make it sharper, set it toward the  F end. The closer it is to F, the 
sharper the image will look.
 Contrast Adjusts the image contrast and the vividness of colors.
To decrease the contrast, set it towa rd the minus end. The closer it is 
to G , the blander the image will look.
To increase the contrast, set it toward  the plus end. The closer it is to 
H, the crisper the image will look.
 Saturation The image’s color saturation can be adjusted.
To decrease the color saturation,  set it toward the minus end. The 
closer it is to  G, the more diluted the colors will look.
To increase the color saturation,  set it toward the plus end. The 
closer it is to  H, the bolder the colors will look.
 Color tone The skin tones can be adjusted.
To make the skin tone redder, set it toward the minus end. The 
closer it is to  G, the redder the skin tone will look.
To make the skin tone less red, set  it toward the plus end. The closer 
it is to  H, the more yellow the skin tone will look.
Parameter Settings and Effects
 By selecting [ Default set.] in step 3, you can  revert the respective 
Picture Style to its defa ult parameter settings.
  To shoot with the Picture Style you mo dified, follow step 2 on page 79 to 
select the modified Picture Style and then shoot.
COPY  
						

							A Customizing Image CharacteristicsN
112
For Monochrome, you can also set [ Filter effect] and [Toning effect] in 
addition to [ Sharpness] and [Contrast ] explained on the preceding 
page.
kFilter Effect
With a filter effect applied to a 
monochrome image, you can make 
white clouds or green trees stand out 
more. 
lToning Effect
By applying a toning effect, you can 
create a monochrome image in that 
color. It can make the image look more 
impressive.
You can select the following: [N:None ], 
[S:Sepia ], [B:Blue ], [P:Purple ] or 
[G:Green ].
V Monochrome Adjustment
FilterSample Effects
N: NoneNormal black-and-white image with no filter effects.
Ye :  Ye l l o wThe blue sky will look  more natural, and the wh ite clouds will look 
crisper.
Or: OrangeThe blue sky will look  slightly darker. The sunset will look more 
brilliant.
R: RedThe blue sky will look quite dark. Fa ll leaves will look crisper and 
brighter.
G: GreenSkin tones and lips will look fine. Tr ee leaves will look crisper and 
brighter.
Increasing the [ Contrast] will make the filter  effect more pronounced.
COPY  
						

							113
You can select a base Picture Style such as [Portrait] or [Landscape ], 
adjust its parameters as des ired and register it under [User Def. 1], 
[User Def. 2 ], or [User Def. 3 ].
You can create Picture Styles whose parameter settings such as 
sharpness and contrast are diff erent. You can also adjust the 
parameters of a Picture Style which  has been registered to the camera 
with EOS Utility (provided software, p.270).
1Select [Picture Style].
 Under the [ 2] tab, select [Picture 
Style ], then press < 0>.
XThe Picture Style selection screen will 
appear.
2Select [User Def.].
  Select [User Def. * ], then press the 
< B > button.
XThe Detail set. screen will appear.
3Press < 0>.
  With [ Picture Style] selected, press 
< 0 >.
4Select the base Picture Style.
  Press the < V> key to select the 
base Picture Style, then press < 0>.
  To adjust the parameters of a Picture 
Style which has been registered to 
the camera with EOS Utility (provided 
software), select the Picture Style 
here.
A  Registering Preferred Image CharacteristicsN
COPY  
						

							A Registering Preferred Image Characteristics N
114
5Select a parameter.
 Select a parameter such as 
[Sharpness], then press < 0>.
6Set the parameter.
  Press the < U> key to adjust the 
parameter as desired, then press 
< 0 >.
For details, see “Customizing Image 
Characteristics” on pages 110-112.
  Press the  button to register 
the modified Picture Style. The 
Picture Style selection screen will 
then reappear.
XThe base Picture Style will be 
indicated on the right of [ User Def. *].
XThe name of the Picture Style having 
any modified settings (different from 
the default) registered under [ User 
Def. * ] will be displayed in blue.
 If a Picture Style has alread y been registered under [User Def. *], 
changing the base Picture Style in  step 4 will nullify the parameter 
settings of the registered Picture Style.
  If you execute [ Clear all camera settings ] (p.164), all the [User Def. *] 
settings will revert to the default.  Any Picture Style registered via EOS 
Utility (provided software)  will have only its modified parameters reverted 
to the default setting.
To shoot with a registered Picture Styl e, follow step 2 on page 79 to select 
[ User Def. * ] and then shoot.
COPY  
						

							115
The function adjusting the color tone so that white objects look white in 
the picture is called white ba lance (WB). Normally, the  (Auto) 
setting will obtain the correct white balance. If natural-looking colors 
cannot be obtained with < Q>, you can select the white balance to 
match the light source or set it  manually by shooting a white object.
1Press the  button.
X[White balance ] will appear.
2Select the white balance.
 Press the < U> key or turn the 
< 6 > dial to select the desired white 
balance, then press < 0>.
  The “Approx. ****K” (K: Kelvin) 
displayed for the following white 
balance settings < W>, < E >, 
< R >,  or < U> is the 
respective color temperature.
Custom white balance enables you to  manually set the white balance 
for a specific light source for better accuracy. Do this procedure under 
the actual light source to be used.
1Photograph a white object.
  A plain, white object should fill the 
viewfinder’s center.
  Focus manually and set the standard 
exposure for the white object.
  You can set any white balance.
B : Matching the Light Source N
O Custom White Balance
COPY  
						

							B: Matching the Light Source N
116
2Select [Custom White Balance].
 Under the [ 2] tab, select [Custom 
White Balance], then press < 0>.
XThe custom white balance selection 
screen will appear.
3Import the white balance data.
  Select the image that was captured in 
step 1, then press .
XOn the dialog screen which appears, 
select [OK] and the data will be 
imported.
  When the menu reappears, press the 
 button to exit the menu.
4Select the custom white balance.
 Press the  button.
  Select [O ], then press < 0>.
  If the exposure obtained in step 1  is way off, a correct white balance 
might not be obtained.
  If the image was captured whil e the Picture Style was set to 
[ Monochrome ] (p.80), it cannot be selected in step 3.
 Instead of a white object, an 18% gray  card (commercially available) can 
produce a more accu rate white balance.
  The personal white balance regist ered with EOS Utility (provided 
software, p.270) will  be registered under < O>. If you do step 3, the data 
for the registered personal wh ite balance will be erased.
COPY  
						

							117
You can correct the white balance that has been set. This adjustment 
will have the same effect as using a commercially-available color 
temperature conversion filter or color compensating filter. Each color 
can be corrected to one of nine levels.
This is for advanced users who are familiar with using color temperature 
conversion or color compensating filters.
1Select [WB Shift/BKT].
  Under the [ 2] tab, select [WB Shift/
BKT ], then press < 0>.
XThe WB correction/WB bracketing 
screen will appear.
2Set the white balance correction.
  Press the < S> key to move the “ ” 
mark to the desired position.
  B is for blue, A is amber, M is 
magenta, and G is green. The color in 
the respective direction will be 
corrected.
  On the upper right, “ Shift” indicates 
the direction and correction amount.
  Pressing the < B> button will 
cancel all the [ WB Shift/BKT ] 
settings.
  Press < 0> to exit the setting and 
return to the menu.
2  Adjusting the Color Tone for the Light SourceN
White Balance Correction
Sample setting: A2, G1
  During the white ba lance correction,  will be displayed in the 
viewfinder and on  the LCD monitor.
  One level of the blue/amber  correction is equivalent to 5 mireds of a color 
temperature conversion filter. (Mir ed: Measuring unit indicating the 
density of a color temper ature conversion filter.)
COPY  
						

							2 Adjusting the Color Tone for the Light Source N
118
With just one shot, three images having a different color balance can be 
recorded simultaneously. Ba sed on the color temperature of the current white 
balance setting, the image will be br acketed with a blue/amber bias or 
magenta/green bias. This  is called white balance bracketing (WB-BKT). White 
balance bracketing is possible up to ±3  levels in single-level increments.
Set the white balance bracketing amount.
 In step 2 for white balance correction, 
when you turn the <
6> dial, the “ ” 
mark on the screen  will change to “     ” 
(3 points). Turning the dial to the right sets 
the B/A bracketing, an d turning it to the 
left sets the M/G bracketing.
XOn the right, “Bracket” indicates the 
bracketing direction  and correction amount.
 Pressing the  button will cancel 
all the [WB Shift/BKT] settings.
  Press < 0> to exit the setting and 
return to the menu.
Bracketing Sequence
The images will be bracketed in  the following sequence: 1. Standard 
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard 
white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
White Balance Auto Bracketing
B/A bias ±3 levels
During WB bracketing, the continuous  shooting speed will be slower. The 
maximum burst for continuous shooting wi ll also be lower and the number of 
possible shots will decrease to  one-third the normal number.
 You can also set white balance correc tion and AEB (p.103) together with 
white balance bracketing. If you set AEB in combination wi th white balance 
bracketing, a total of nine images  will be recorded for a single shot.
 Since three images are recorded for one  shot, the card will take longer to 
record the shot.
  “BKT ” stands for Bracketing.
COPY  
						

							119
The range of reproducible colors is called the color space. With this 
camera, you can set the color space to sRGB or Adobe RGB for 
captured images. For normal shooting, sRGB is recommended.
In Basic Zone modes, sRGB is set automatically.
1Select [Color space].
 Under the [ 2] tab, select [Color 
space ], then press < 0>.
2Set the desired color space.
  Select [ sRGB] or [Adobe RGB ], then 
press < 0>.
This color space is mainly used for commercial printing and other 
industrial uses. This setting is not  recommended if you do not know 
about image processing, Adobe RGB, and Design rule for Camera File 
System 2.0 (Exif 2.21).
The image will look very subdued  in a sRGB personal computer 
environment and with printers not co mpatible with Design rule for 
Camera File System 2.0 (Exif 2.21). Post-processing of the image with \
software will therefore be required.
3  Setting the Color Reproduction RangeN
About Adobe RGB
 If the image is captured  with the color space set  to Adobe RGB, the file 
name will start with “_MG_” (fir st character is an underscore).
 
The ICC profile is not appended. See explanations about the ICC profile 
in the Software Instruction Manual (p.272) in the CD-ROM.
COPY  
						

							120
COPY