Canon Eos Rebel T3 1100d Instruction Manual

							201
Printing Images
 Printing (p.202)
You can connect the camera directly to a printer and print 
out the images in the card. The camera is compatible with 
“w PictBridge” which is the standard for direct printing.
  Digital Print Order Format (DPOF) (p.211)
DPOF (Digital Print Order Fo rmat) enables you to print 
images recorded in the card according to your printing 
instructions such as the image  selection, quantity to print, 
etc. You can print multiple images in one batch or give the 
print order to a photofinisher.
COPY  
						

							202
The direct printing procedure is done entirely with the camera 
while you look at the LCD monitor.
1Set the camera’s power switch to 
.
2Set up the printer.
 For details, see the printer’s 
instruction manual.
3Connecting the camera to the 
printer.
 Use the interface cable provided with 
the camera.
  Connect the cable to the camera’s 
 terminal with the cable plug’s 
< G > icon facing the front of the 
camera.
  To connect to the printer, refer to the 
printer’s instruction manual.
4Turn on the printer.
5Set the camera’s power switch to 
.
XSome printers may make a beeping 
sound.
Preparing to Print
Connecting the Camera to a Printer
COPY  
						

							203
Preparing to Print
6Playback the image.
 Press the  button.XThe image will appear, and the < w> 
icon will appear on the upper left to 
indicate that the camera is connected 
to a printer.
wPictBridge
  Movies cannot be printed.
  The camera cannot be used  with printers compatible only with CP Direct 
or Bubble Jet Direct.
  Do not use any interface cable other than the  one provided.
  If there is a long beeping sound in st ep 5, it indicates a problem with the 
printer. Resolve the problem displa yed by the error message (p.210).
 You can also print RAW images  taken with this camera.
  If you use a battery pack  to power the camera, ma ke sure it is fully 
charged. With a fully-charged  battery, printing up to about 4 hr. 30 min. is 
possible.
  Before disconnecting the cable, first tu rn off the camera and printer. Hold 
the plug (not the cord)  to pull out the cable.
  For direct printing, using AC Adapte r Kit ACK-E10 (sold separately) to 
power the camera is recommended.
COPY  
						

							204
The screen display and setting options will differ depending on the 
printer.  Some settings might not be available. For details, see the 
printer’s instruction manual.
1Select the image to be printed.
 Check that the  icon is 
displayed on the upper left of the LCD 
monitor.
  Press the < U> key to select the 
image to be printed.
2Press .
XThe print setting screen will appear.
3Select [Paper settings].
  Select [Paper settings ], then press 
< 0 >.
XThe paper settings screen will 
appear.
w Printing
Printer-connected icon
Print setting screen
* Depending on the printe r, certain settings such as the date and file 
number imprinting and trimming  might not be selectable.
Sets the printing effects (p.206).
Sets the date or file 
number imprinting to on 
or off.
Sets the quantity  to be printed.
Sets the trimming  (cropping) (p.209).
Sets the paper size, type, and layout.
Returns to the screen in step 1.
Starts the printing.
The paper size, type, and layout  you have set are displayed.
COPY  
						

							205
wPrinting
 Select the size of the paper loaded in 
the printer, then press < 0>.
XThe paper type screen will appear.
  Select the type of the paper loaded in 
the printer, then press < 0>.
 
When using a Canon  printer and Canon 
paper, read the printer’s instruction manual 
to check what pape r types can be used.
XThe page layout screen will appear.
  Select the page layout, then press 
.
XThe print setting screen will reappear.
*1: After ordering the prints with “Digital  Print Order Format (DPOF)” (p.211), you should 
print by following “Direct Printing with DPOF” (p.214).
*2: From the Exif data, the camera name, lens name, shooting mode, shutter speed,  aperture, exposure compensation amount,  ISO speed, white balance, etc., will be 
imprinted.
Q  Setting the Paper Size
Y Setting the Paper Type
U  Setting the Page Layout
Bordered The print will have white  borders along the edges.
BorderlessThe print will have no borders. If your printer cannot print 
borderless prints, the print will have borders.
Bordered cThe shooting information* will  be imprinted on the border on 
9x13cm and larger prints.
xx-upOption to print 2, 4, 8, 9,  16, or 20 images on one sheet.
20-upc
35-up pTwenty or 35 images will be printed as thumbnails on A4 or Letter size paper*1.• [20-up c] will have the shooting information*2 imprinted.
DefaultThe page layout will vary depending on the printer model or its settings.
COPY  
						

							wPrinting
206
4Set the printing effects.
 Set as necessary. If you need not set 
any printing effects, go to step 5.
  What is displayed on the screen 
differs depending on the printer.
  Select the option on the upper right 
(circled in the screenshot), then press 
.
  Select the desired printing effect, then 
press < 0>.
  If the < e> icon is displayed brightly 
next to < z>, you can also adjust 
the printing effect (p.208).
* When you change the printing effects, it  is reflected in the image displayed on 
the upper left. Note that the printed imag e might look slightly different from the 
displayed image which is only an approximation. This also applies to 
[Brightness] and [Adjust levels] on page 208.
Printing Effect Description
EOnThe image will be printed according to the printer’s standard 
colors. The image’s Exif data is used to make automatic 
corrections.
EOffNo automatic correction will be applied.
EVIVIDThe image will be printed with  higher saturation to produce 
more vivid blues and greens.
ENRImage noise is reduced before printing.
0  B/WPrints in black-and-wh ite with true blacks.
0 Cool tonePrints in black-and-white  with cool, bluish blacks.
0 Warm tonePrints in black-and-white wi th warm, yellowish blacks.
zNaturalPrints the image in the actu al colors and contrast. No 
automatic color adjustments are applied.
z Natural MThe printing characteristics are the same as the “Natural” 
setting. However, this setti ng enables finer printing 
adjustments than with “Natural.”
EDefaultThe printing will differ depend ing on the printer. For details, 
see the printer’s  instruction manual.
COPY  
						

							207
wPrinting
5Set the date and file number 
imprinting.
 Set as necessary.
  Select <
I>, then press .
  Set as desired, then press < 0>.
6Set the number of copies.
  Set as necessary.
  Select <
R>, then press < 0>.
  Set the number of copies, then press 
.
7Start printing.
  Select [Print ], then press < 0>.
  With Easy printing, you  can print another image us ing the same settings. 
Just select the image and press the  button. With Ea sy printing, the 
number of copies will  always be 1. (You cann ot set the number of 
copies.) Also, any trimming  (p.209) will not be applied.
  The [ Default ] setting for printing effect s and other options are the 
printer’s own default settings as set  by the printer’s manufacturer. See 
the printer’s instru ction manual to find out what the [ Default] settings are.
  Depending on the im age’s file size and image-recording  quality, it may 
take some time for the printing  to start after you select [Print].
  If image tilt correction (p.209) has be en applied, it may take longer to 
print the image.
 
To stop the printing, press  while [Stop] is displayed, then select [OK].  If you execute [ Clear all camera settings ] (p.164), all the settings will 
revert to the default.
COPY  
						

							wPrinting
208
In step 4 on page 206, select the printing 
effect. When the < e> icon is displayed 
brightly next to < z>, you can press 
the < B> button to adjust the printing 
effect. What can be adjusted or what is 
displayed will depend on the selection 
made in step 4.
  Brightness
The image brightness can be adjusted.
  Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen displayed, press 
the < B> button to change the position of 
the <
h>. Press the < U> key to freely adjust 
the shadow level (0 - 127) or highlight level 
(128 - 255).
  kBrightener
Effective in backlit conditions which can make the subject’s face look 
dark. When [ On] is set, the face will be  brightened for printing.
  Red-eye corr.
Effective in flash images where t he subject has red eye. When [On] 
is set, the red eye will be corrected for printing.
e  Adjustment of Printing Effects
 The [kBrightener] and [Red-eye corr.] effects will not show on the screen.  When you select [ Detail set.], you can adjust the [ Contrast], 
[ Saturation], [ Color tone], and [Color balance ]. To adjust the [ Color 
balance ], use the <
S> keys. B is for blue, A is amber, M is magenta, 
and G is green. The colo r in the respective direction will be corrected.
  If you select [ Clear all], all the printing effect se ttings will be reverted to 
the default.
COPY  
						

							209
wPrinting
You can crop the image and print only 
the trimmed portion as if the image was 
recomposed.  Do the trimming right 
before printing. If you set the trimming 
and then set the print settings, you may 
have to set the trimming again.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and aspect ratio.
 The image area within the tri mming frame will be printed. The 
trimming frame’s aspect ra tio can be changed with [Paper settings].
Changing the trimming frame size
When you press the < u> or < I> button, the size of the 
trimming frame will change. The sm aller the trimming frame, the 
larger the image magnification will be for printing.
Moving the trimming frame
Press the  key to move the frame over  the image vertically or 
horizontally. Move the trim ming frame until it covers the desired image area.
Rotating the frame
Pressing the < B> button will toggle the trimming frame 
between the vertical a nd horizontal orientations. This enables you 
to create a vertical-oriented print from a horizontal image.
Image tilt correction By turning the < 6> dial, you can adjust  the image tilt angle up to 
±10 degrees in 0.5-degree increm ents. When you adjust the 
image tilt, the < O> icon on the screen will turn blue.
3 Press  to exit the trimming.
XThe print setting screen will reappear.
  You can check the trimmed image area on the upper left of the 
print setting screen.
Trimming the Image
Tilt correction
COPY  
						

							wPrinting
210
 Depending on the printer , the trimmed image area  might not be printed 
as you specified.
  The smaller you make the trimming fr ame, the grainier the picture will 
look in the print.
  While trimming the image, look at th e camera’s LCD monitor. If you look 
at the image on a TV sc reen, the trimming frame  might not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no in k, no paper, etc.) and select [Continue] to 
resume printing but it doe s not resume, operate the bu ttons on the printer to 
resume printing. For deta ils on resuming the printing, see the printer’s 
instruction manual.
Error MessagesIf a problem occurs during printing, an error me ssage will appear on the 
camera’s LCD monitor. Press  to stop printing . After fixing the 
problem, resume prin ting. For details on how to  fix a printing problem, refer 
to the printer’s instruction manual.
Paper Error Check whether the paper is pr operly loaded in the printer.
Ink Error Check the printer’s ink level,  and check the waste ink tank.
Hardware Error Check for any printer problems ot her than paper and ink problems.
File Error The selected image  cannot be printed via PictBr idge. Images taken with a 
different camera or images  edited with a computer might not be printable.
COPY