Canon Eos Rebel T3 1100d Instruction Manual

							41
Q Quick Control for Shooting Functions
  Select the desired function and press 
. The function’s setting screen 
will appear.
  Press the < U> key or turn the 
< 6 > dial to change the setting. 
There are also functions to be set 
with the < B> button.
  Press < 0> to finalize the setting and 
to return to the Quick Control screen.
Settable Functions on Quick Control Screen
Function Setting Screen
Shutter speed (p.92)
Flash exposure 
compensation (p.102)
AF mode (p.81)
White balance bracketing*
(p.118)
Shooting mode*(p.22) Highlight tone priority* (p.220)
Auto Lighting Optimizer 
(p.107)
Metering mode (p.100)
White balance correction* (p.117)
Exposure compensation/ AEB setting (p.101, 103)
Picture Style (p.79)
ISO speed (p.77)
Image-recording quality 
(p.74)
Aperture (p.94)
Raise built-in flash
White balance (p.115)
Drive mode (p.86, 87)
  Asterisked functions cannot be se t with the Quick Control screen.
  When you select < s> and press < 0>, the built-in flash will pop-up.
Ð
COPY  
						

							42
With menus, you can set various functions such as the image-recording 
quality, date/time, etc. While looking at the LCD monitor, use the 
 button,  cross keys, and < 0> button on the camera 
back to operate the menus.
In the Basic Zone, Movie shooting m ode, and Creative Zone, the tabs 
and menu options displayed will be different.
3 Menu Operations
Menu Screen
 Cross keysLCD monitor  button
 button
Ta b
Menu items Menu settings
1 Shooting
5 Set-up
9 My Menu
3 Playback
Basic Zone modes
Movie shooting mode
Creative Zone modes
COPY  
						

							43
3 Menu Operations
1Display the menu screen.
 Press the < M> button to display 
the menu screen.
2Select a tab.
  Press the < U> key to select a 
menu tab.
3Select the desired item.
  Press the < V> key to select the 
item, then press .
4Select the setting.
 Press the < V> or < U> key to 
select the desired setting. (Some 
settings require you to press either 
the < V> or < U> key to select it.)
  The current setting is indicated in 
blue.
5Set the desired setting.
 Press < 0> to set it.
6Exit the setting.
  Press the < M> button to return 
to the shooting settings display.
Menu Setting Procedure
  In Step 2, you can also turn the  dial to select a menu tab.
  The explanation of menu  functions hereinafter assumes that you have 
pressed the < M> button to displa y the menu screen.
  For details about each menu item, see page 234.
COPY  
						

							44
If the card is new or was previously formatted by another camera or 
computer, format the card with the camera. When the card is formatted, all images and data in the card will 
be erased. Even protected  images will be erased, so make 
sure there is nothing you need to keep. If necessary, transfer 
the images to a computer, etc ., before formatting the card.
1Select [Format].
 Under the [ 5] tab, select [ Format], 
then press < 0>.
2Format the card.
  Select [OK ], then press < 0>.
XThe card will be formatted.XWhen the formatting is completed, 
the menu will reappear.
  For low-level formatting, press the 
 button to checkmark [ Low level 
format ] with < X>, then select [ OK].
3  Formatting the Card
COPY  
						

							45
3 Formatting the Card
 The card is new.
  The card was formatted by a diff erent camera or a computer.
  The card is full with images or data.
  A card-related error is displayed  (p.250).
Execute [Format] in the following cases:
About Low-level Formatting Do low-level formatting if  the card’s recording or reading speed seems slow 
or if you want to totally er ase all data in the card.
  Since low-level formatting  will erase all recordable sectors in the card, the 
formatting will take slightly  longer than normal formatting.
  You can stop the low-level  formatting by selecting [Cancel]. Even in this 
case, normal formatting  will have been completed and you can use the 
card as usual.
  When the card is formatted or data  is erased, only the file management 
information is changed. The actual  data is not completely erased. Be 
aware of this when selling or disc arding the card. When discarding the 
card, execute low-level formatting or destroy the card physically to 
prevent the data from being leaked.
  Before using a ne w Eye-Fi card, the software  in the card must be 
installed in your comp uter. Then format the card with the camera.
 The card capacity displa yed on the card format sc reen might be smaller 
than the capacity in dicated on the card.
  This device incorporates exFAT te chnology licensed from Microsoft.
COPY  
						

							46
The LCD monitor can display the shooting settings screen, menu 
screen, captured images, etc. When you turn on the power switch, 
the shooting settings will be 
displayed.
  When you press the shutter button 
halfway, the display will turn off. 
And when you let go of the shutter 
button, the display will turn on.
  You can also turn off the display by 
pressing the < B> button.  Press 
the button again to turn on the 
display.
Switching the LCD Monitor Display
Shooting Settings
  Appears when you press the 
 button. Press the 
button again to return to the 
shooting settings screen.  
Appears when you press the 
 button. Press the button 
again to return to the shooting 
settings screen.
Menu FunctionsCaptured Image
  You can set [ 6 LCD off/on btn ] so that the shooti ng settings display 
does not keep turning off and on (p.166).
  Even when the menu scre en or captured image is displayed, pressing 
the shutter button will enable you to shoot immediately.
COPY  
						

							47
The Feature guide is a simple description of the respective function or 
option. It is displayed when you c hange the shooting mode or use the 
Quick Control screen to set a shooti ng function, Live View shooting, 
movie shooting, or playback. When you select a function or option on 
the Quick Control screen, the Feature  guide description is displayed. 
The Feature guide turns off when you further proceed with any 
operation.
  Shooting mode  (Sample)
  Quick Control (Sample)
Select [Feature guide].
 Under the [ 6] tab, select [Feature 
guide ], then press < 0>. Select 
[Disable], then press < 0>.
Feature Guide
3  Disabling the Feature Guide
Shooting function Live View shooting Playback
COPY  
						

							48
COPY  
						

							49
Basic Shooting andImage Playback
This chapter explains how to  use the Basic Zone modes 
on the Mode Dial for best re sults and how to playback 
images.
With Basic Zone modes, all you do is point and shoot and the 
camera sets everything automatically (p.63, 232). Also, to 
prevent botched pictures due  to mistaken operations, major 
shooting settings cannot be changed in fully-automatic modes.
Basic Zone
About the Auto Lighting OptimizerIn Basic Zone modes, the Auto Lighting Optimizer (p.107) will 
adjust the image automatically to obtain the optimum brightness 
and contrast. It is also  enabled by default in Creative Zone modes.
COPY  
						

							50
1Set the Mode Dial to .
2Aim any AF point over the 
subject.
 All the AF points will be used to focus, 
and generally the closest object will 
be focused.
  Aiming the center AF point over the 
subject will make focusing easier.
3Focus the subject.
 Press the shutter button halfway, and 
the lens focusing ring will rotate to 
focus.
XThe dot inside the AF point achieving 
focus flashes briefly in red. At the 
same time, the beeper will sound and 
the focus confirmation light < o> in 
the viewfinder will light.
XIf necessary, the built-in flash will pop-
up automatically.
4Take the picture.
  Press the shutter button completely to 
take the picture.
XThe captured image will be displayed 
for approx. 2 sec. on the LCD monitor.
 If the built-in flash has popped up, 
you can push it back down with your 
fingers.
1  Fully Automatic Shooting
AF point
Focus confirmation light
COPY