Canon Camera Eos 1d X User Manual

							401
• If you drop the equipment and the casing breaks open to expose the internal parts, do 
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause  electrical shock.
• Do not look at the sun or an extremely bright  light source through the camera or lens. 
Doing so may damage your vision.
• Keep the camera from the reach of small  children. The neck strap can accidentally 
choke the child.
• Do not store the equipment in dusty or hum id places. This is to prevent fire and 
electrical shock.
• Before using the camera inside an airplane  or hospital, check if it is allowed. 
Electromagnetic waves emitted by the  camera may interfere with the plane’s 
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below: - Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and  pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the  cord or put a heavy object on the cord. 
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
• Occasionally unplug the power plug and use  a dry cloth to clean off the dust around 
the power outlet. If the surrounding is dusty,  humid, or oily, the dust on the power outlet 
may become moist and short-circuit the outlet to cause a fire.
Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under  the hot sun or near a heat source. The 
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause  injury. Also make sure the tripod is stur dy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap 
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging  apparatus with a cloth. Doing so may trap 
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if wate r or metal fragments enter inside the camera, 
promptly remove the battery pack and back- up battery. This is to prevent fire and 
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so  may cause battery leakage or a shorter battery life. The battery pack or back-up 
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact 
your dealer or your nearest Canon Service Center. 
COPY  
						

							402
Digital Camera Model DS126301 SystemsThis device complies with Part 15 of the FCC Rules.  Operation is subject to the 
following two conditions: (1 ) This device may not cause harmful interference, 
and (2) this device mu st accept any interference received, including 
interference that may ca use undesired operation.
Note: This equipment has been  tested and found to comply with the limits for 
class B digital devices, pursuant to  Part 15 of the FCC Rules. These 
limits are designed to provide reas onable protection against harmful 
interference in a residential installa tion. This equipment generates, uses 
and can radiate radio frequency energy  and, if not installed and used in 
accordance with the in structions, may cause h armful interference to 
radio communications. However, there  is no guarantee that interference 
will not occur in a particular insta llation. If this equipment does cause 
harmful interference to radio or television reception, which can be 
determined by turning the equipment  off and on, the user is encouraged 
to try to correct the interference  by one or more of the following 
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation betw een the equipment and receiver.
— Connect the equi pment into an outlet on  a circuit different from 
     that to which th e receiver is connected.
— 
Consult the dealer or an experienced radio/TV technician for help.The cable with the ferrite core provided with the digi tal camera must be used 
with this equipment in order to comply with Class B limits in Subpart B of Part 
15 of the FCC rules.
Do not make any changes or modificati ons to the equipment unless otherwise 
specified in the manual. If  such changes or modificati ons should be made, you 
could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
This Class B digital apparatus co mplies with Canadian ICES-003.
When connecting to and using a ho usehold power outlet, use only AC 
Adapter Kit ACK-E4 (rated input: 10 0-240 V AC 50/60 Hz, rated output: 
12.6 V DC). Using anything else  can cause fire, overheating, or 
electrical shock.
COPY  
						

							403
IMPORTANT SAFETY INSTRUCTIONS
1.SAVE THESE INSTRUCTIONS  — This manual contains important safety 
and operating instructions  for Battery Charger LC-E4N.
2. Before using the charger, read all instructions and cautionary remarks on 
(1) the charger, (2) the ba ttery pack, and (3) the pro duct using the battery 
pack.
3. CAUTION  — To reduce risk of injury, charge only the Battery Pack LP-
E4N. Other types of batteries may burst, ca using personal injury and other 
damage.
4. Do not expose the ch arger to rain or snow.
5. Use of an attachment not recommended  or sold by Canon may result in 
fire, electric shock, or personal injury.
6. To reduce risk of damage to electric  plug and cord, pull by plug rather than 
by cord when disconnecting charger.
7. Make sure cord is located so that it  will not be stepped on, tripped over, or 
otherwise subjected to damage or stress.
8. Do not operate the charger with da maged cord or plug - replace them 
immediately.
9. Do not operate the charger if it ha s received a sharp blow, been dropped, 
or otherwise damaged in  any way; take it to a qualified serviceman.
10. Do not disassemble the charger; take it to a qualified serviceman when 
service or repair is required. Incorrec t reassembly may result in a risk of 
electric shock or fire.
11. To reduce risk of electric shock,  unplug charger from outlet before 
attempting any maintenance or cleaning.
MAINTENANCE INSTRUCTION
Unless otherwise stated in this manu al, there are no user serviceable parts 
inside. Refer servicing to qualified serviceman.
USA and Canada only:
The Lithium ion/polymer battery  that powers the product is 
recyclable. Please call 1-800-8-BATTERY  for information on 
how to recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may 
apply. See www.dtsc.ca.gov/hazardo uswaste/perchlorate/ for details.
CAUTIONRISK OF EXPLOSION IF BATTERY IS  REPLACED BY AN INCORRECT TYPE. 
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
COPY  
						

							404
MEMO
COPY  
						

							405
MEMO
COPY  
						

							406
MEMO
COPY  
						

							407
MEMO
COPY  
						

							408
MEMO
COPY  
						

							409
Software Start Guide
This chapter gives an overview of the software in the 
EOS DIGITAL Solution Disk (CD-ROM) provided with 
the camera and explains how to  install the software on a 
personal computer. It also ex plains how to view the PDF 
files on the Software Instruction Manual CD-ROM.
EOS DIGITAL Solution Disk(Software)Software Instruction 
Manual
COPY  
						

							410
EOS DIGITAL Solution Disk
This disk contains various software for EOS DIGITAL 
cameras.
With the camera connected to a  personal computer, EOS Utility enables 
you to transfer still phot os and movies shot with the camera to the 
computer. You can also use the personal  computer to set various camera 
settings and shoot remotely with t he computer connected to the camera.
This software is recommended for us ers who mainly shoot RAW images. 
You can view, edit, process, and pr int RAW images at high speed. You 
can also edit JPEG images while  retaining the original images.
This software is recommended for users who mainly shoot JPEG 
images. You can easily view image s and play back MOV movies. You 
can also print JPEG images. With an  internet connection, it is also 
possible to download additional functions.
You can edit Picture Styles and create  and save original Picture Style 
files. This software is aimed at  advanced users who are experienced in 
processing images.
Software Start Guide
EOS Utility
Digital Photo Professional
ImageBrowser EX
Picture Style Editor
Note that the software ZoomBrow ser EX/ImageBrowser provided with 
previous cameras does not su pport still photos and movie files shot with this 
camera (not compatible). Use Image Br owser EX provided with this camera.
COPY