Canon Camera Eos 1d X User Manual

							271
Viewing the Images on TV
2Connect the camera to a TV set.
 Use an HDMI cable to connect the 
camera to the TV.
X The TV’s input will switch 
automatically to the HDMI port 
connected to the camera.
3Press the camera’s < x> button.
XAn image will appear on the TV 
screen and you can use the TV’s 
remote control to play back images.
4Select an image or movie.
  Point the remote control toward the 
TV set and press the /  button to 
select an image.
5Press the remote control’s Enter 
button.
XThe menu appears and you can 
perform the playback operations 
shown on the left.
 Press the / button to select the 
desired option, then press the Enter 
button. For a slide show, press the 
remote control’s 
/ button to select 
an option, then press the Enter button.
  If you select [ Return] and press the 
Enter button, the menu will disappear 
and you can use the  / button to 
select an image.
Still photo playback menu
Movie playback menu
: Return
: 9-image index
: Play movie
: Slide show
: Disp. shooting info
: Rotate
 Some TV sets require yo u to first enable the HDMI CEC connection. For 
details, refer to the TV set’s instruction manual.
  Certain TV sets, even those comp atible with HDMI CEC, may not 
operate properly. In  such a case, set [33: Ctrl over HDMI] to [ Disable], 
and use the camera to contro l the playback operation.
COPY  
						

							272
Viewing the Images on TV
1Connect the provided AV cable to 
the camera.
 With the plug’s < Canon> logo facing 
the back of the camera, insert it into 
the < q > terminal.
2Connect the AV cable to the TV 
set.
 Connect the AV cable to the TV’s 
video IN terminal and audio IN 
terminal.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the < x> button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  To play back movies, see page 262.
Viewing on Non High-Definition (HD) TV Sets
(Red)
(White)
(Yellow)
  Do not use any AV cable other than  the one provided. Images may not 
be displayed if you  use a different cable.
  If the video system format set on  the camera does not match the TV’s, 
the images will not be displayed prop erly. If this happens, switch to the 
proper video system format with [ 53: Video system].
COPY  
						

							273
Protecting an image prevents it from being erased accidentally.
1Select the image to be protected.
 Press the < 3> button to play back 
images, then turn the < 5> dial to 
select the image.
2Protect the image.
  When you press the  button, the 
image will be prot ected and the  
icon will appear at the top of the 
screen.
  To cancel the image protection, press 
the < J> button again. The < K> 
icon will disappear.
  To protect another image, repeat 
steps 1 and 2.
1Select [Protect images].
 Under the [ 31] tab, select [Protect 
images ], then press < 0>.
2Select [Select images].
  Select [Select images ], then press 
< 0 >.
X The images will be displayed.
J  Protecting Images
Protecting Images Individually with the < J> Button
Image protect icon
3  Protecting Images Individually with the Menu
COPY  
						

							274
J Protecting Images
3Protect the image.
 Turn the  dial to select the image 
to be protected,  then press <
0>.
XThe image will be protected, and the 
 icon will appear at the top of 
the screen.
  To cancel the image protection, press 
 again. The < K> icon will 
disappear.
 
To protect another im age, repeat step 3.
 Press the  button to return to 
the menu.
You can protect all the images in a folder or on the card at one time. When you select [All images in folder ] 
or [ All images on card ] under [x1: 
Protect images], all the images in the 
folder or on a card will be protected.
To cancel the image protection, select 
[Unprotect all images in folder ] or 
[Unprotect all images on card ].
3 Protecting All Images in a Folder or Card
 If you format the card (p.55), the protected images  will also be erased. To protect an ima ge, press and quickl y let go of the  button. If you 
hold down the button  for approx. 2 sec., a vo ice memo will be recorded.
  If [8 5: J /K  button function ] is not set to [Protect (Hold: Record 
memo) ], you cannot use the < J> button to protect images. Use [ x1: 
Protect images ] to protect images.
 Movies can also be protected.
 Once an image is protected, it can not be erased by the camera’s erase 
function. To erase a protected image, y ou must first cancel the protection.
 If you erase all the images (p.281), only the protected images will remain. 
This is convenient when you want to  erase unnecessary images all at once.
COPY  
						

							275
You can append a voice memo to a captured image. The voice memo will 
be saved as a WAV sound file with the same file number as the image. It 
can be played back with the camera or provided software.
1Select the image to which you 
want to append a voice memo.
 Press the < x> button to play back 
images, then turn the < 5> dial to 
select the image.
2Recording a Voice Memo
  Hold down the  for approx. 2 sec.
  When [ Recording memo... ] appears, 
keep pressing the button and speak 
into the voice memo microphone. The 
maximum recording time for a voice 
memo is 30 sec.
  When you have finished speaking, let 
go of the button.
X The [ ] icon will be displayed on the 
top of the screen.
K  Recording and Playing Voice Memos
Recording a Voice Memo
Voice memo microphone
  With [ 86: Memo audio quality ], you can change the recording quality 
of the voice memo.
  To record a voice memo longer th an 30 sec., repeat step 2.
  You can also record one voice memo  right after image capture during the 
image review by following step 2.
  You cannot append a voice me mo to a protected image.
  You cannot append a voice memo to a movie.
  A voice memo cannot be  recorded with an external microphone.
COPY  
						

							276
K Recording and Playing Voice Memos
When [85: J /K button function ] is set to [Play memo (Hold: Rec. 
memo) ] (p.330), you can play back a voice memo appended to an 
image.
1Set [8 5: J /K  button function] 
to [Play memo (Hold: Rec. 
memo)].
  Set this function while referring to 
page 330.
2Select the image whose voice 
memo you want to playback.
 Press the < x> button to play back 
images, then turn the < 5> dial to 
select an image that has the [ ] icon 
displayed on the top.
3Playback a voice memo.
  Press the < K> button to play the 
voice memo.
  Turn the < 6> dial to adjust the 
sound volume.
  To stop playback, press the < K> 
button.
Playing a Voice Memo
Speaker
  If the image has been ap pended with multiple voic e memos, they will be 
played consecutively.
 
Erasing only the voice memo appended to an image is not possible with the camera. If the image is erased (p.280), any app ended voice memo will also be erased.
COPY  
						

							277
The images recorded on one card can be copied to the other card.
1Select [Image copy].
 Under the [ 31] tab, select [Image 
copy ], then press < 0>.
2Select [Sel.Image].
  Check the copy source and target 
card’s capacity.
  Turn the < 5> dial to select 
[Sel.Image ], then press < 0>.
3Select the folder.
  Turn the < 5> dial to select the folder 
containing the image to be copied, 
then press < 0>.
  Refer to the images displayed on the 
right to select the desired folder.
X The images in the selected folder will 
be displayed.
a Copying Images
3  Copying Individual Images
Number of images in folder
Folder name
Lowest file number
Highest file number
The copy source is the card selected in the [ 51: Record func+card/folder 
sel. ] menu’s [ Record/play ] ([Playback ]) setting.
COPY  
						

							278
a Copying Images
 4Select the images to be copied.
  Turn the < 5> dial to select an image 
to be copied, then press < 0>.
X The < X> icon will appear on the 
upper left of the screen.
  If you press the < u> button and turn 
the < 6> dial counterclockwise, you 
can select an image from a three-
image display. To return to the single-
image display, turn the < 6> dial 
clockwise.
  To select other images to be copied, 
repeat step 4.
5Press the < J> button.
 After selecting all the images to be 
copied, press the < J> button.
6Select [OK].
  Check the target card and press 
.
7Select the target folder.
  Turn the < 5> dial to select the folder 
to copy the images to, then press 
< 0 >.
  To create a new folder, select [ Create 
folder ].
Total images selected
COPY  
						

							279
a Copying Images
8Select [OK].
  Check the copy source and target 
card’s information.
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X The copying will start and its progress 
will be displayed.
  When the copying is completed, the 
result will be displayed.
  Select [OK ] to return to the screen in 
step 2.
You can copy all the images in a fol der or on a card at one time. Under 
[x1: Image copy ], when you select [ Sel.n] or [All image], you can 
copy all the images in t he folder or on the card.
3 Copying All Images in a Folder or Card
 The file name of the copied image will be the same as the source image’s file name. If [Sel.Image ] is set, you cannot copy imag es in multiple folders at one 
time. Select images in  each folder to copy them folder by folder.
  If an image is being copied to a target folder/card which has an image 
with the same file number, the following will be  displayed: [Skip image 
and continue ] [Replace existing image ] [Cancel copy ]. Select the 
copying method, then press < 0>.
• [ Skip image and continue ]: 
Any images in the source folder ha ving the same file number as 
images in the target folder  will be skipped and not copied.
• [ Replace existing image ]: 
Any images in the target  folder having the same file number as the 
source images (including protec ted images) will be overwritten.
If an image with a print order (p.309) is overwri tten, you will have to set the print order again. The image’s print order information  and image transfer information will 
not be retained when  the image is copied.
 
Shooting is not possible during the copying operation. Select [Cancel] before shooting.
COPY  
						

							280
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.273) will not be erased.
Once an image is erased, it cann ot be recovered. Make sure you 
no longer need the im age before erasing it. To prevent important 
images from being erased accide ntally, protect them. Erasing a 
RAW+JPEG image will erase both the RAW and JPEG images.
1Play back the image to be erased.
2Press the  button.
X The Erase menu will appear at the 
bottom of the screen.
3Erase the image.
  Turn the < 5> dial to select [ Erase], 
then press < 0>. The image 
displayed will be erased.
By appending checkmarks < X> to the images to be erased, you can 
erase multiple images at one time.
1Select [Erase images].
  Under the [ 31] tab, select [Erase 
images ], then press < 0>.
L Erasing Images
Erasing a Single Image
3  Checkmarking < X> Images to be Erased in a Batch
When you set [ 86: Default Erase option ] to [[Erase] selected ], you can 
erase images qu icker (p.332).
COPY