Canon Camera Eos 1d X User Manual

							311
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
If you press the  button and turn the 
< 6 > dial counterclockwise, you can 
select an image from a three-image 
display. To return to the single-image 
display, turn the < 6> dial clockwise.
Press the < M> button to save the 
print order to the card.
[Standard] [Both]
Press < 0> and a print order for one 
copy of the displayed image will be 
placed. By turning the < 5> dial, you 
can set the quantity up to 99.
[Index]
Press < 0> to include images with a 
checkmark < X> in the index print.
  Byn
Select [Mark all in folder ] and select the folder. A print order for one 
copy of all the images in the fol der will be placed. If you select [ Clear 
all in folder ] and select the folder, the print order for that entire 
folder will be canceled.
  All image
If you select [ Mark all on card ], one copy of all the images on the 
card will be set for printing. If you select [ Clear all on card], the print 
order will be cleared for a ll the images on the card.
Print Ordering
Quantity
Total images selected
Index icon
Checkmark
 
Note that RAW images and movies will  not be included in the print order 
even if you set “By n” or “All image.”
  When using a PictBridge  printer, print no more than 400 images for one 
print order. If your print  order specifies more imag es, some of the images 
may not be printed.
COPY  
						

							312
With a PictBridge printer, you can easily 
print images with DPOF.
1Prepare to print.
 See page 300. Follow the “Connec ting the Camera to a Printer”
procedure up to step 5.
2Under the [ 31] tab, select [Print order].
3Select [Print].
 [Print] will be displayed only if the camera is connected to a
printer and printing is possible.
4Set the [Paper settings] (p.302).
 Set the printing effects (p.304) if necessary.
5Select [OK].
W Direct Printing with DPOF
  Before printing, be sure  to set the paper size.
  Certain printers cannot im print the file number.
  If [Bordered ] is set, certain printers may  imprint the date on the border.
  Depending on the printer,  the date may appear faint  if it is imprinted on a 
bright background  or on the border.
 Under [ Adjust levels ], [Manual ] cannot be selected.
  If you stopped the printing and want to resume  printing the remaining 
images, select [Resume ]. Note that printing will not resume if you stop 
the printing and any of the following occurs:
• Before resuming the printing, you  changed the print order or deleted 
print-ordered images.
• When you set the index, you ch anged the paper setting before 
resuming the printing.
• When you paused the printing, the  card’s remaining capacity was low.
  If a problem occurs during  printing, see page 308.
COPY  
						

							313
You can connect the camera to a personal computer and operate the 
camera to transfer images on the card to the personal computer. This is 
called direct image transfer.
Direct image transfer is performed and controlled from the 
camera, with the interface displ ayed on the camera’s LCD monitor.
The images transferred to the personal computer will be saved in the 
[Pictures] or [ My Pictures] folder and organized in  folders by shooting 
date. Before connecting the camera to the personal computer, be 
sure to install the provided  software (EOS DIGITAL Solution 
Disk on CD-ROM) on the personal computer.
For the procedure to install the  provided software, see page 411.
1Set the camera’s power switch to 
.
2Connect the camera to a personal 
computer.
 Use the interface cable provided with 
the camera.
  Connect the cable to the camera’s 
 terminal with the cable 
plug’s < D> icon facing the front of 
the camera.
  Connect the cord’s plug to the 
personal computer’s USB terminal.
d Transferring Images to a Personal Computer
Preparation for Image Transfer
COPY  
						

							314
d Transferring Images to a Personal Computer
3Set the camera’s power switch to 
.
  When the personal computer prompts 
you to select a program, select [ EOS 
Utility ].
X The EOS Utility screen will appear on 
the personal computer.
For RAW+JPEG images, you can specify 
which image to transfer. On the next 
page in step 2, select [ RAW+JPEG 
transfer ], and select the images to be 
transferred: [ JPEG only], [RAW only ], or 
[RAW+JPEG ].
3 Transferring RAW+JPEG Images
After the EOS Utility screen appears, do not operate EOS Utility.  If any 
screen other than EOS Utility’s  top screen is displayed, [Direct transfer] in 
step 5 on page 316 will not be displaye d. (The image transfer function will 
not be available.)
  If the EOS Utility scree n does not appear, refer to the Software 
Instruction Manual  (CD-ROM, p.412).
  Before disconnecting the  cable, turn off the camera. Hold the plug (not 
the cord) to pull out the cable.
  You can also transfer images to an ftp server via a wired LAN connected 
to the Ethernet RJ-4 5 terminal (p.21). For deta ils, refer to the separate 
“Wired LAN Instruction Manual.”
The [ RAW+JPEG transfer ] setting will change automa tically in relation with 
the setting for [Communication settings ] → [Network settings ] → [Set 
up ] →  [Transfer type/size ] →  [RAW+JPEG transfer ].
COPY  
						

							315
d Transferring Images to a Personal Computer
 Sel.Image
1Select [Image transfer].
 Under the [ 32] tab, select [Image 
transfer ], then press < 0>.
2Select [Image sel./transfer].
  Select [Image sel./transfer ], then 
press < 0>.
3Select [Sel.Image].
  Select [Sel.Image ], then press .
4Select the images to be transferred.
 Turn the  dial to select the image 
to be transferred, then press .
  Turn the < 5> dial to display < X> on 
the screen’s upper left, then press 
< 0 >.
 
If you press the  button and turn 
the  dial counterclockwise, you 
can select an image  from a three-image 
display. To return to the single-image 
display, turn the <
6> dial clockwise.  To select other images to be 
transferred, repeat step 4.
  To return to the screen in step 3, 
press the < M> button.
3 Select the Images to be Transferred
 When [ Sel.Image ] is selected, you can check  the image’s transfer status 
on the upper left of the sc reen: No mark: Not selected. X: Selected for 
transfer.  l: Transfer failed.  k: Transferred.
 
The procedures for [RAW+JPEG transfer] on page 314 and steps 1 to 4 above 
can also be performed while the camera is not connected to a personal co\
mputer.
COPY  
						

							316
d Transferring Images to a Personal Computer
5Transfer the image.
 On the computer screen, check that 
EOS Utility’s top screen is displayed.
  Select [Direct transfer ], then press 
< 0 >.
  On the confirmation screen, select 
[OK ] and the images will be 
transferred to the personal computer.
  Images selected with [ Sel.n] and 
[All image] can also be transferred 
this way.
  Sel. n
Select [Sel. n] and select [ Folder images not transfer’d ]. When 
you select a folder, all the images in that folder not yet transferred to 
the personal computer will be selected.
Selecting [Folder images failed transf. ] will select the images in the 
selected folder that failed to transfer.
Selecting [Clear folder transf. history] will clear the transfer history 
of the images in the selected folder. After clearing the transfer 
history, you can select [ Folder images not transfer’d ] and again 
transfer all the images in the folder.
  All image
If [All image] is selected and you select [ Card images not 
transferred ], all the images on the card not yet transferred to a 
personal computer will be selected.
For a description of [ Card images failed transfer ] and [Clear 
card’s transf. history ], see “Sel.n ” above.
 If any screen other than  EOS Utility’s top screen is displayed on the 
personal computer, [ Direct transfer] is not displayed.
  During the image transfer, certai n menu options cannot be used.
 You can also transfer movies.
  Up to 9,999 images can be  transferred in one batch.
  Shooting is possible du ring the image transfer.
COPY  
						

							317
Customizing theCamera
You can customize various came ra features to suit your 
picture-taking preferences with Custom Functions. 
Also, you can register the  current camera settings 
under shooting modes < w1>, , or < w3>, or save 
the camera settings to a card.
COPY  
						

							318
3 Custom Functions
81: ExposureA  LV  
Shooting k Movie 
Shooting
Exposure level increments
p.320
kk
ISO speed setting increments kIn 
a
Bracketing auto cancelk(Still photo, 
with WB 
bracketing  set)
Bracketing sequencep.321k
Number of bracketed shots k
Spot metering linked to AF pointp.322Safety shiftk
82: Exposure
Restrict shooting modes
p.323
kk
Restrict metering modes
Metering used in manual exposure
Set shutter speed rangep.324kk
Set aperture range kk
AE Microadjustmentp.325kk
FE Microadjustmentk
83: Drive
Continuous shooting speed
p.326
k(Still photo)
Limit continuous shot count k
(Still photo)
Restrict drive modesk(Still photo)
The shaded Custom Functions do not function during Live View (LV) 
shooting or movie shooting . (Settings are disabled.)
COPY  
						

							319
3 Custom Functions
Selecting [8 7: Clear all Custom Func. (C.Fn)] will clear all the 
Custom Function settings.
8 4: Display/OperationA  LV  
Shooting k Movie 
Shooting
Focusing Screenp.327
Viewfinder info. during exposure
p.328LCD panel illumination during Bulbk
Recording card, image size setting
8 5: Operation
Dial direction during Tv/Av
p.329 k
In 
a
Av setting without lenskIn a
Multi function lockkk
Custom Controlsp.330 Depends on settingJ
/K  button function(During image review 
after capture)
86: Others
Add cropping information
p.331 k(Still photo)
Timer duration[Timer after release] only
Shutter release time lag
p.332Memo audio quality(During image review 
after capture)
Default Erase option(Playback)
87: Clear
Even if all the Custom Functions  are cleared, the settings for [84: 
Focusing Screen ] and [85: Custom Controls ] will remain unchanged. 
Also, although the adjustments  made will not be cleared, [82: AE 
Microadjustment] and [8 2: FE Microadjustment] will be set  to [Disable ]. 
COPY  
						

							320
Under the [8] tab, you can customize 
various camera features to suit your 
picture-taking preferences. Any settings 
different from the default will be 
displayed in blue.
3  Custom Function Settings
C.Fn1: Exposure
Exposure level increments
1/3: 1/3-stop, Exposure compensation 1/3-stop
Sets 1/3-stop increments for the  shutter speed, aperture, exposure 
compensation, and flas h exposure compensation.
1/1: 1-stop, Exposure compensation 1/3-stop
Sets whole-stop increments for the  shutter speed and aperture, and 1/3-
stop increments for exposure  compensation and flash exposure 
compensation.
1/2: 1/2-stop, Exposure compensation 1/2-stop
Sets 1/2-stop increments for the  shutter speed, aperture, exposure 
compensation, and flas h exposure compensation.
ISO speed setting increments
1/3: 1/3-stop
1/1: 1-stop
Bracketing auto cancel
ON: Enable
When you set the power switch to < 2>, the AEB and white balance 
bracketing settings will be canceled. AE B will also be canceled when the 
flash is ready to fire or if  you switch to movie shooting.
OFF: Disable
The AEB and white balance bracketing  settings will not be canceled 
even if you set the power switch to < 2>. (If the flash is  ready to fire or 
if you switch to movie shooting, AE B will be canceled temporarily, but 
the AEB range will be retained.)
COPY