Canon Camera Eos 1d X User Manual

							251
You can search for images quickly with the index display showing four or nine images on one screen.
1Press the  button.
  During image playback, press the 
 button.
X [6 u] will be displayed on the lower 
right of the screen.
2Switch to the index display.
 Turn the  dial counterclockwise.XThe 4-image index display will appear. The currently-selected image will be 
highlighted in a blue frame.
 
If you turn the  dial further 
counterclockwise, the 9-image index 
display will appear. Turning the <
6> 
dial clockwise will switch the display from 
9 images to 4 image s and then to 1 image.
3Select an image.
 Turn the < 5> dial to move the blue 
frame and select the image.
  Press the < u> button to turn off the 
[6 u] icon, then turn the  dial 
to go to the next or preceding screen.
  Press < 0> in the index display, and 
the selected image will be displayed 
as a single image.
x  Searching for Images Quickly
H Display Multiple Images  on One Screen (Index Display)
ÄÄ
COPY  
						

							252
x Searching for Images Quickly
With the single-image disp lay, you can turn the  dial to jump through the images forward or backward a ccording to the jump method set.
1Select [Image jump w/6].
 Under the [ 32] tab, select [Image 
jump w/ 6], then press < 0>.
2Select the jump method.
  Turn the < 5> dial to select the jump 
method, then press < 0>.
d : Display images one by one
e : Jump 10 images
f : Jump 100 images
g : Display by date
h : Display by folder
i : Display movies only
j : Display stills only
k : Display by image rating  (p.256) 
Turn the < 6> dial to select 
rating.
3Browse by jumping.
  Press the < x> button to play back 
images.
  On the single-image display, turn the 
 dial.
I Jump through Images (Jump Display)
Playback position
Jump method
 
To search images according to the shooting date, select [ Date].
  To search images accordin g to folder, select [Folder].
  If the card contains both movi es and still photos, select [Movies] or 
[ Stills ] to display only either ones.
  If no images match the selected [ Rating], you cannot browse through the 
images with the  dial.
COPY  
						

							253
You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor.
1Magnify the image.
 The image can be magnified during 
image playback (single-image 
display), during image review after 
image capture, and from shooting-
ready state.
  Press the < u> button.
X The magnified view will appear. The 
magnified area and [ 6u] will be 
displayed on the lower right of the 
screen.
  The image magnification increases 
as you turn the  dial clockwise. 
You can magnify the image up to 10x.
  The image magnification decreases 
as you turn the < 6> dial 
counterclockwise. Turning the dial 
further will display the index display 
(p.251).
2Scroll around the image.
  Use < 9> to scroll around the 
magnified image.
  To exit the magnified view, press the 
 button or < x> button and the 
single-image display will return.
u  Magnified View
Magnified area position
  In magnified view,  you can turn the  dial to view another image at 
the same magnification.
  The image can be magnified also du ring the image review immediately 
after shooting.
  A movie cannot be magnified.
COPY  
						

							254
u Magnified View
Under the [ 33] tab, when you select 
[Magnificatn (apx)], you can set the 
starting magnification and initial position 
for the magnified view.
  1x (no magnification)
The image will not be magnified.  The magnified view will start with 
the single-image display.
  2x, 4x, 8x, 10x (magnify from center)
The magnified view will start at  the image center at the selected 
magnification.
  Actual size (from selected point)
The recorded image’s pixels will be  displayed at approx. 100%. The 
magnified view will start at the AF point that achieved focus. If the 
photo was taken with manual focus, the magnified view will start at 
the image center.
  Same as last magnification (from center)
The magnification will be the same  as the last time you exited the 
magnified view with the < x> or < u> button. The magnified view 
starts from the image center.
3  Magnification Settings
With images taken with [ Live mode] or [u Live mode ] (p.209), the 
magnified view starts  from the image center.
COPY  
						

							255
You can rotate the displayed image to the desired orientation.
1Select [Rotate image].
 Under the [ 31] tab, select [Rotate 
image ], then press < 0>.
2Select an image.
  Turn the < 5> dial to select the 
image to be rotated.
  You can also select an image on the 
index display (p.251).
3Rotate the image.
 Each time you press < 0>, the 
image will rotate clockwise as follows: 
90°  → 270°  → 0°.
  To rotate another image, repeat steps 
2 and 3.
  Press the  button to return to 
the menu.
b  Rotating the Image
  If you have set [ 51: Auto rotate ] to [OnzD ] (p.283) before taking 
vertical shots, you need not rota te the image as described above.
  If the rotated image is not displaye d in the rotated orientation during 
image playback, set [ 51: Auto rotate ] to [OnzD ].
  A movie cannot be rotated.
COPY  
						

							256
You can rate images and movies with one of five rating marks: l/m/
n/o/p . This function is called rating.
1Select [Rating].
 Under the [ 32] tab, select [Rating ], 
then press < 0>.
2Select an image or movie.
  Turn the < 5> dial to select the 
image or movie to be rated.
  If you press the < u> button and turn 
the < 6> dial counterclockwise, you 
can select an image or movie from a 
three-image display. To return to the 
single-image display, turn the < 6> 
dial clockwise.
3Rate the image or movie.
  Pressing < 0> will turn off the [s ] 
icon.
  Turn the < 5> dial to select a rating.
X The total number of images and 
movies rated will be counted for each 
rating.
  To rate another image or movie, 
repeat steps 2 and 3.
  Press the  button to return to 
the menu.
Setting Ratings
3  Set Ratings with the Menu
COPY  
						

							257
Setting Ratings
Under [85:J /Kbutton function ], if you set [Rating ( J and K  
disabled) ] (p.330), you can press the < J> button to rate images/
movies during playback.
1Set the  button’s function.
  Set [ 85:J /Kbutton function ] to 
[Rating ( J and  Kdisabled) ].
2Playback the image.
 Turn the < 5> dial to select the 
image or movie to be rated.
3Rate the image or movie.
  Each time you press the < J> button, 
the rating mark will change:  l/m /
n /o /p/None.
  To rate another image or movie, 
repeat steps 2 and 3.
Using the < J> Button
The total number of images  with a given rating can be displayed up to 999. If 
there are more than 999 imag es with a given rating, [###] will be displayed 
for that rating.
Taking advantage of ratings  With [ 32: Image jump w/ 6], you can display only images and 
movies with a specific rating.
  With [ 32: Slide show ], you can play back only  images and movies with 
a specific rating.
  With Digital Photo Professional (p rovided software, p.410), you can 
select only images and movi es with a specific rating.
  With Windows Vista and Windows 7, you can see each file’s rating as 
part of the file information displa y or in the provided image viewer.
COPY  
						

							258
During playback, you can press the  button to set the following: 
[K : Protect images , b : Rotate image,  9: Rating, R : RAW image 
processing (RAW images only),  S: Resize (JPEG image only),  : 
Highlight alert , : AF point display , e : Image jump w/6 ].
For movies, only the function s in bold above can be set.
1Press the  button.
  During image playback, press the 
 button.
X The Quick Control screen will appear.
2Select a function and set it.
  Tilt < 9> up or down to select a 
function.
X The setting of the selected function is 
displayed at the bottom of the screen.
  Turn the < 5> dial to set the function.
  For RAW image processing and 
Resize, press < 0> and set the 
function. For details, see page 286 for 
RAW image processing and page 291 
for Resize. To cancel, press the 
< M > button.
3Exit the setting.
 Press the < Q> button to exit the 
Quick Control screen.
Q  Quick Control During Playback
COPY  
						

							259
Q Quick Control During Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD ]. If [ 51: Auto rotate ] 
is set to [ OnD] or [ Off], the [ b Rotate image ] setting will be  recorded to 
the image, but the came ra will not rotate the image for display.
 Press the < Q> button during index display to  switch to the single-image 
display and the Quick Co ntrol screen will appear. Pressing the < Q> 
button again will return to the index display.
  For images taken with another camera , the functions you can select may 
be limited.
COPY  
						

							260
You can play back movies in the following three ways:Use the provided AV cable or an HDMI 
Cable HTC-100 (sold separately) to 
connect the camera to a TV set. Then 
you can play back captured movies and 
still photos on the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full High-Definition 
(Full HD: 1920x1080) and High-
Definition (HD: 1280x720) movies with 
higher image quality.
You can play back movies on the 
camera’s LCD monitor. You can also edit 
out the movie’s first and last scenes, and 
play back the still photos and movies on 
the card in an automatic slide show.
k Enjoying Movies
Playback on a TV set(p.269, 272)
Playback on the Camera’s LCD Monitor(p.262-268)
 Movies on a card can be  played only by devices compatible with MOV 
files.
  Since hard disk recorder s do not have an HDMI IN terminal, the camera 
cannot be connected to  a hard disk recorder with an HDMI cable.
  Even if the camera is  connected to a hard di sk recorder with a USB 
cable, movies and still photos  cannot be played or saved.
A movie edited with a personal computer  cannot be rewritten to the card and 
played back with the camera.
COPY