Canon Camera Eos 1d X User Manual

							181
P Multiple Exposures
3Set [Multi-expos ctrl].
  Select the desired multiple-exposure 
control method, then press < 0>.
  Additive
The exposure of each single exposure  is added cumulatively. Based on 
the [No. of exposures], set a negative exposu re compensation. Refer 
to the basic guide below to set  a negative exposure compensation.
Exposure Compensation Setting Guide for Multiple ExposuresTwo exposures: -1 stop, three exposures:  -1.5 stop, four exposures: -2 stops
 Average
Based on the [ No. of exposures ], negative exposure compensation 
is set automatically as you shoot  multiple exposures. If you shoot 
multiple exposures of the same scene, the exposure of the subject’s 
background will be automatically controlled to obtain a standard 
exposure. If you want to change the exposure of each single 
exposure, select [ Additive].
  Bright/Dark
The brightness (or darkness) of the base image and the images to 
be added are compared at the same  position, and then the bright (or 
dark) part will be left in the pi cture. Depending on the overlapping 
colors, the colors may be mixed depending on the brightness (or 
darkness) ratio of the compared images.
4Set the [No. of exposures].
  Turn the < 5> dial to select the 
number of exposures, then press 
< 0 >.
  You can set it from 2 to 9 exposures.
If [On:Func/Ctrl] and [ Additive] are both set, the image displayed 
during shooting may look  noisy. However, when you finish shooting the 
set number of exposures, noise reduction will be  applied and the final 
multiple-exposure imag e that is recorded will have less noise.
COPY  
						

							182
P Multiple Exposures
5Set the images to be saved.
  To save all the single exposures and 
the merged multiple-exposure image, 
select [ All images ], then press < 0>.
  To save only the merged multiple-
exposure image, select [ Result 
only ], then press < 0>.
6Select [Continue Mult-exp].
  Select either [ 1 shot only] or 
[Continuously ], then press .
  With [ 1 shot only ], multiple-exposure 
shooting will be canceled 
automatically after the shooting ends.
  With [ Continuously ], multiple- 
exposure shooting continues until the 
setting in step 2 is set to [ Disable].
7Take the first exposure.
XWhen [On:Func/Ctrl ] is set, the 
captured image will be displayed.
X The < P> icon will blink.
 
The number of remaining exposures is 
displayed on the right of the viewfinder 
and in brackets [ ] on the screen.
 Pressing the  button enables you 
to view the captur ed image (p.185).Remaining number of 
exposures
 During multiple-exposure shooting, Auto Lighting Optimizer, highlight 
tone priority, peripheral  illumination correction  and chromatic aberration 
correction will be disabled.
  The image-recording quality, ISO spee d, Picture Style, high ISO speed 
noise reduction and color space, etc. se t for the first single exposure will 
also be set for the subsequent exposures.
  If the Picture Style is set to [ Auto], the [ Standard ] Picture Style will be 
set for shooting.
COPY  
						

							183
P Multiple Exposures
8Shoot subsequent exposures.
X When [On:Func/Ctrl ] is set, the merged multiple-exposure 
image will be displayed.
  With Live View shooting, the mu ltiple-exposure images merged 
so far will be displayed. By pressing the < B> button, you can 
display only the Live View image.
  After you shoot the set number of  exposures, multiple-exposure 
shooting will be canceled. With  continuous shooting, after you 
finish shooting the set number of  exposures while holding down 
the shutter button, the shooting will stop.
  With multiple exposures, the more  exposures there are, the more 
noticeable the noise, irregular colors , and banding will be. Also, as noise 
increases with higher ISO speeds,  shooting at low ISO speeds is 
recommended.
 
If [Additive] is set, the image processing after taking the multiple exposures 
will take time. (The access lamp will light up for longer than usual.)
 If you perform Live View shooting while [On:Func/Ctrl] and [Additive] are 
both set, the Live View function will stop automatically when the multiple 
exposure shooting ends.
  In step 8, the brightness and nois e of the multiple-exposure image 
displayed during Live View shooting will be different from the final 
multiple-exposure image recorded.
  If [On:ContShtng ] is set, let go of the shut ter button after shooting the 
set number of exposures.
 
If the power switch is set to  or the battery is  replaced after you set 
multiple exposure settings, multiple -exposure shooting will be canceled.
 If you switch the sh ooting mode to  while shooting, 
multiple-exposure sh ooting will end.
  When multiple exposure  is set or during multiple-exposure shooting, you 
cannot use the grayed out fu nctions in the camera menu.
  If you connect the  camera to a person al computer or printer, multiple-
exposure cannot be set.
When [ On:Func/Ctrl ] is set, you can press the < x> button during shooting 
to view the multiple exposures taken  so far or delete the last single 
exposure (p.185).
COPY  
						

							184
P Multiple Exposures
You can select an image recorded in the card as the first single 
exposure. The original of the se lected image will remain intact.
You can only select  1 images.  You cannot select  41/61  or 
JPEG images.
1Select [Select image for multi. expo.].
  Select [Select image for multi. 
expo. ], then press < 0>.
X
The images in the ca rd will be displayed.
2Select an image.
 Turn the < 5> dial to select the 
image to be used as the first single 
exposure, then press < 0>.
  Turn the < 5> dial to select [ OK].
X The file number of the selected image 
will be displayed at the bottom of the 
screen.
3Take the picture.
  When you select the first image, the 
number of remaining exposures as 
set with [No. of exposures ] will 
decrease by 1. For example, if [ No. of 
exposures ] is 3, you can shoot two 
exposures.
Merging Multiple Exposures with an Image Recorded in the Card
 Images shot with highligh t tone priority set to [Enable], or with cropping 
information appended (p.331)  cannot be selected as the first single exposure.
 Auto Lighting Optimizer, peripheral  illumination correction and chromatic 
aberration correction will be disabled , regardless of the settings of the 
1  image selected as the  first single exposure.
 
The ISO speed, Picture Style, high ISO  speed noise reduction, and color space, 
etc., set for the first 1 image will also be set  for the subsequent images. If the first  1 image’s Picture Style is [Auto ], the [Standard ] Picture 
Style will be set for  the subsequent images.
  You cannot select an image  taken with another camera.
COPY  
						

							185
P Multiple Exposures
When [On:Func/Ctrl ] is set and you 
have not finished shooting the set 
number of exposures, you can press the 
< x > button to view the merged 
multiple-exposure image so far. You can 
check how it looks and the exposure. 
(Not possible when [ On:ContShtng] is 
set.)
If you press the < L> button, the 
operations possible during multiple-
exposure shooting will be displayed.
Checking and Deleting Multiple  Exposures During Shooting
 You can also select a  1 multiple-exposure image.
  If you select [ Deselect img ], the selected image will be canceled.
OperationDescription2 Return to 
previous screenThe operations will disappear  and the screen before you 
pressed the < L> button will reappear.
q Undo last imageDeletes the last image you  shot (shoot another image). 
The number of remaining expo sures will increase by 1.
W  Save and exit If [
Save source imgs: All images ] is set, all of the single 
exposures and the me rged multiple-exposure image will 
be saved before exiting.
If [ Save source imgs: Result only ] is set, only the 
merged multiple-exposure im age will be saved before 
exiting.
r  Exit without 
savingNone of the images will  be saved before exiting.
During multiple-exposure  shooting, you can only play back multiple-
exposure images.
COPY  
						

							186
P Multiple Exposures
  Are there any restrictions on the image-recording quality?All JPEG image-recording quality  settings can be selected. If 41 or 
61 is set, the merged multiple-exposure will be recorded as a 1 image.
  Can I merge images recorded in the card?With [ Select image for multi. expo. ], you can select the first single 
exposure from the images recorded on the card (p.184). Note that you 
cannot merge multiple images already recorded on the card.
  Are multiple exposures possible with Live View shooting?With [ On:Func/Ctrl ] set, you can shoot multiple exposures with Live 
View shooting (p.199). 
  What file numbers are used for saving merged multiple-
exposures?
If all images are set to be saved,  the merged multiple-exposure image file 
number will be the serial number comi ng after the file number of the final 
single exposure used to create the merged multiple-exposure image.
  Will auto power off take effect during multiple-exposure 
shooting?
As long as [ 52: Auto power off ] is not set to [Disable], the power will 
turn off automatically after 30 min. of non-operation. If the auto power off 
takes effect, multiple-exposure shoo ting will end, and multiple-exposure 
settings will be canceled. Before star ting the multiple-exposure shooting, 
the auto power off will take effect as  set with the camera, and multiple-
exposure settings will be canceled.
FAQ
Image-Recording  Quality SettingSingle ExposuresMerged Multiple-  Exposure
JPEGJPEGJPEG
111
41 /6141 /611
1+JPEG1 +JPEG1+JPEG
41 /61 +JPEG41 /61 +JPEG1+JPEG
COPY  
						

							187
Although using the self-timer or Remote Switch can prevent camera 
shake, using mirror lockup to prevent  camera vibrations (mirror shock) 
can also help when you use a super  telephoto lens or shoot close ups 
(macro photography).
1Set [Mirror lockup].
 Under the [ z3] tab, select [Mirror 
lockup ], then press < 0>.
  Select [Enable ] or [Enable: Mirror 
down w/ s], then press < 0>.
2Focus the subject, then press the 
shutter button completely.
XThe mirror will swing up, and the 
 icon will blink on the top LCD 
panel.
3Press the shutter button 
completely again.
X The picture will be taken.
  With [ Enable] set, the mirror will go 
back down when the shooting ends.
  If [Enable: Mirror down w/ s] is 
set, the mirror lockup will be 
maintained even after shooting. To 
cancel the mirror lockup, press .
2 Mirror Lockup
COPY  
						

							188
2 Mirror Lockup
 In very bright light such  as at the beach or a sk i slope on a sunny day, 
take the picture prompt ly after mirror lockup.
  Do not point the camera  toward the sun. The sun’s heat can scorch and 
damage the shutter curtains.
  If you use the self-timer and mirror  lockup in combination with bulb 
exposure, keep pressing the shutter  button completely (self-timer delay 
time + bulb exposure time ). If you let go of the shutter button during the 
self-timer countdown, there will  be a shutter-release sound, but no 
picture will be taken.
  During mirror lockup, shooting func tion settings and menu operations, 
etc. are disabled.
  When [Enable ] is set, single shooting will take effect even if the drive 
mode is set to co ntinuous. When [Enable: Mirror down w/ s] is set, 
the current drive mode will  take effect for the shooting.
  You can also use the self-t imer with mirror lockup.
  If 30 seconds elapse after the mirror  has locked up, it will go back down 
automatically. Pressing the  shutter button completely again locks up the 
mirror again.
  For mirror lockup shooti ng, using a tripod and Remote Switch RS-80N3 
(sold separately) or Timer Remote Controller TC-80N3 (sold separately) 
is recommended (p.179).
COPY  
						

							189
Flash Photography
This chapter explains how to shoot with an EOS-
dedicated, EX-series Speedlite (sold separately) or non-
Canon flash unit and how to  set flash functions on the 
camera’s menu screen.
COPY  
						

							190
An EX-series Speedlite (sold separately) makes flash photography as 
easy as normal shooting.
For detailed instructions, refe r to the EX-series Speedlite’s 
instruction manual.  This camera is a Type-A camera that can use all 
the features of EX-series Speedlites.
To set the flash functions and flash Custom Functions with the camera’s 
menu, see pages 193-198.
  FE lock
This enables you to obtain a proper fl ash exposure for a specific part 
of the subject. Aim the viewfinder c enter over the subject, then press 
the camera’s < B> button and take the picture.
  Flash exposure compensation
In the same way as normal exposure compensation, flash exposure 
compensation can be set. You ca n set flash exposure compensation 
up to ±3 stops in 1/3-stop increments.
Press the camera’s < Q> button, then turn the < 5> dial while 
looking at the viewfinder or top LCD panel.
D  Flash Photography
EOS-dedicated, EX-series Speedlites
Shoe-mount Speedlites Macro Lites
If [z 2: Auto Lighting Optimizer] (p.146) is not set to [ Disable], the image 
may still look bright even if a dark er flash exposure compensation amount 
was set.
When it is difficult to  achieve focus with autofo cus, the EOS-dedicated, 
external Speedlite may automati cally emit the AF-assist beam.
COPY