Canon 5d Mark 2 Instruction Manual

							151
Basically, there are the following three ways to playback the movies you 
shot.
Use the provided stereo video cable or 
HDMI Cable HTC-100 (sold separately) 
to connect the camera to a TV set. You 
can then playback the captured movies 
and photos on the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full HD (Full High-
Definition 1920x1080) movies with 
higher image quality.
You can playback movies on the 
camera’s LCD monitor. You can also 
playback the photos and movies 
recorded in the card as an automatic 
slide show.
k  Enjoying Movies
Playback on a TV set(p.157, 158)
Playback on the Camera’s LCD Monitor(p.153-156)
 Movies on a card can be  played only by devices compatible with MOV 
files.
  Since hard disk recorder s do not have an HDMI IN terminal, the camera 
cannot be connected with an HDMI cable. 
  Even if the camera is  connected to a hard di sk recorder with a USB 
cable, movies and photos c annot be played nor saved.
A movie edited with a personal computer  cannot be rewritten to the card and 
played back with the camera.
COPY  
						

							152
k Enjoying Movies
(See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser)
The movie files recorded in the card can 
be transferred to a personal computer 
and played or edited with ZoomBrowser 
EX/ImageBrowser (provided software).
You can also extract a single frame from 
a movie and save it as a still photo.
Playback and Editing with a Personal Computer
 To have the movie playback smoothl y on a personal computer, the 
personal computer must be a high-performance model. Regarding the 
hardware requirements for ZoomBr owser EX/ImageBrowser, see the 
PDF file instruction manual.
  If you want to use commer cially-available software to playback or edit the 
movies, be sure it is compatible with MOV files. For details on 
commercially-available software , inquire the software maker.
COPY  
						

							153
1Playback the image.
 Press the < x> button to display the 
image.
2Select a movie.
 Turn the  dial to select the image.  During the single-image display, the 
 icon displayed on the 
upper left indicates that it is a movie.
 
During the index display, the perforation 
on the left edge of  the image indicates 
that it is a movie. 
Movies cannot be 
played from the in dex display. Press 
the <
u> button to switch to the 
single-image display.
3Press < 0>.
 On the single-image display, press .XThe movie playback panel will appear 
on the bottom.
4Playback the movie.
  Turn the < 5> dial to select [ 7] 
(play), then press < 0>.
X The movie playback will start.
  You can pause the movie playback by 
pressing .
  During movie playback, you can 
adjust the sound volume by turning 
the < 6> dial.
  For more details on the playback 
procedure, see the next page.
k  Playing Movies
Sp ea ke r
COPY  
						

							154
k Playing Movies
ItemPlayback Description
2 ExitReturns to the single-image display.
7 PlayPressing  toggles between play and stop.
8 Slow motionAdjust the slow motion speed by turning the < 5> dial. The 
slow-motion speed is indi cated on the upper right.
5 First frameDisplays the movie’s first frame.
3 Previous frameEach time you press , a single previous frame is 
displayed. If you hold down , it will rewind the movie.
6 Next frameEach time you press , the movie will play frame-by-
frame. If you hold down < 0>, it will fast forward the 
movie.
4 Last frameDisplays the movi e’s last frame.
Playback position
mm’ SS”Playback time
 VolumeTurn the  dial to adjust the vo lume of the camera’s 
built-in speaker (p.17).
  Press the < B> button to switch th e information display.
  If you took a still photo when you shot  the movie, the still photo will be 
displayed for about 1 sec.  during the movie playback.
  If you connect the  camera to a TV set (p.157-158) to playback a movie, 
adjust the sound volume with the TV set. (Turning the < 6> dial will not 
adjust the sound volume.)
  Movies cannot be edited with  the camera. With ZoomBrowser EX/
ImageBrowser (provided software),  you can edit out the unnecessary 
beginning or ending parts of the movie.
COPY  
						

							155
You can playback the images in the card as an automatic slide show.
1Select [Slide show].
 Under the [ 4] tab, select [ Slide 
show ], then press < 0>.
2Select the images to be played 
back.
  Turn the < 5> dial to select the item, 
then press < 0>.
[All images/Movies/Stills]
  Turn the < 5> dial to select one of 
the following: [ jAll images/
k Movies/z Stills]. Then press 
< 0 >.
[Folder/Date]
  Turn the < 5> dial to select either 
[
nFolder] or [i Date].
  When < z > is displayed 
brightly, press the < B> button.
  Turn the < 5> dial to select the folder 
or date, then press .
3 Slide Show (Auto Playback)
Quantity of images for playback
Item Playback Images
jAll imagesAll the still photos and movies in the card will be played back.
nFolderStill photos and movies in the selected folder will be played 
back.
iDate Still photos and movies taken on the selected shooting date will 
be played back.
kMoviesOnly the movies in the ca
rd will be played back.
zStillsOnly the still photos in the  card will be played back.
COPY  
						

							156
3 Slide Show (Auto Playback)
 3Set the playback time and repeat 
option.
 Turn the < 5> dial to select [ Set up], 
then press < 0>.
  For still photos, set the [ Play time] 
and [Repeat ] options, then press the 
< M > button.
4Start the slide show.
 Turn the < 5> dial to select [ Start], 
then press < 0>.
X After [ Loading image... ] is displayed 
for a few seconds, the slide show will 
start.
  To pause the slide show, press < 0>. 
During pause, [ ] will be displayed 
on the upper left of the image. Press 
< 0 > again to resume the slide 
show.
5Quit the slide show.
  To quit the slide show and return to 
the setting screen, press the 
 button.
[Play time][Repeat]
 During pause, you can turn the < 5> or < 6> dial to view another 
image.
  During the slide show, auto  power off will not work.
  The display time may vary depending on the image.
  To view the slide show on  a TV set, see page 157-158.
COPY  
						

							157
You can also view the still photos and movies on a TV set. Before 
connecting or disconnecting the cable between the camera and 
television, turn off the camera and television.
* Adjust the movie’s sound  volume with the TV set.* Depending on the TV set, part of the image di splayed might be cut off.
1Connect the provided stereo 
video cable to the camera.
 Connect the stereo video cable to the 
camera’s < q> terminal. Insert 
the cable plug all the way in.
2Connect the video cable to the TV 
set.
  Connect the stereo video cable to the 
TV’s video IN terminal and to the 
audio IN terminal.
3Turn on the TV and switch the 
TV’s video input to select the 
connected terminal.
4Set the camera’s power switch to 
.
5Press the < x> button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  To playback the movie, see page 153.
Viewing the Images on TV
Viewing on Non-HD (High-Definition) TV Sets
(Red)
(White)
(Yellow)
 If the video system format does not ma tch the TV’s, the images will not be 
displayed properly. Set the pr oper video system format with [6 Video system].  Do not use any stereo video cable ot her than the one provided. Images 
might not be displayed if yo u use a different video cable.
COPY  
						

							158
Viewing the Images on TV
The HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
 Connect the HDMI cable to the 
camera’s < D > terminal.
 
With the plug’s  logo 
facing the front of the  camera, insert it into 
the camera’s <
D> terminal.
2Connect the HDMI cable to the TV set.
  Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the < x> button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
 
The images will be displayed automatically 
at the TV’s optimum resolution.
  To playback movies, see page 153.
Viewing on HD (High-Definition) TV Sets
* By pressing the < B> 
button, you can change 
the display format.
  Do not connect any other de vice to the camera’s  
terminal. Doing so ma y cause a malfunction.
  Some TVs might not be able to disp lay the captured images. In such a 
case, use the provided stereo vi deo cable to connect to the TV.
  The camera’s < q> terminal and < D> terminal cannot 
be used at the same time.
COPY  
						

							159
Protecting the image prevents it from being erased accidentally.
1Select [Protect images].
 Under the [ 3] tab, select [ Protect 
images ], then press < 0>.
X The protect setting screen will 
appear.
2Select the image and protect it.
  Turn the < 5> dial to select the 
image to be protected, then press 
< 0 >.
X When an image is protected, the 
 icon will appear on the screen.
  To cancel the image protection, press 
 again. The < K> icon will 
disappear.
  To protect another image, repeat step 
2.
  To exit the image protection, press 
the < M > button. The menu will 
reappear.
K Protecting Images
Image protect icon
If you format the card  (p.43), the protected images will also be erased.
 Once an image is protected, it cann ot be erased by the camera’s erase 
function. To erase a protected im age, you must first cancel the 
protection.
  If you erase all the images (p.16 1), only the protected images will 
remain. This is convenient when you want to erase unnecessary images 
all at once.
COPY  
						

							160
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.159) will not be erased.
Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being er ased accidentally, protect it.
1Playback the image to be erased.
2Press the  button.
X The erase menu will appear at the 
bottom of the screen.
3Erase the image.
  Turn the < 5> dial to select [ Erase], 
then press < 0>. The image 
displayed will be erased.
By checkmarking the images to be erased, you can erase multiple 
images at one time.
1Select [Erase images].
  Under the [ 3] tab, select [ Erase 
images ], then press < 0>.
L Erasing Images
Erasing a Single Image
3  Checkmarking < X> Images to be Erased in a Batch
COPY