Brother MFC 9465CDN User Manual

Routine maintenance
55
A
eHold the green handle of the belt unit 
with both hands and lift the belt unit up, 
then pull it out.
 
fRemove two pieces of orange packing 
material and discard them.
 
Note
This step is only necessary when you are 
replacing the waste toner box for the first 
time, and is not required for the 
replacement waste toner box. The orange 
packing pieces are installed at the factory 
to protect your machine during shipment.
 
gRemove the waste toner box from the 
machine using the...

56
hPut the belt unit back into the machine. 
Make sure the belt unit is level and fits 
firmly into place.
 
iInstall orange packing materials to the 
drum unit as follows:
To secure the toner cartridges, install 
the matching orange packing strips 
(1) (marked L and R) to the drum unit 
on the left and right sides, as shown 
in the illustration.
Attach the orange packing strip (2) to 
the left side of the drum unit, as 
shown in the illustration.
Slide the small orange packing 
material (3) onto the...

Routine maintenance
57
A
jPut a piece of paper (A4 or Letter) on the 
belt unit to prevent damage to the belt 
unit.
 
kMake sure the green lock lever (1) is in 
the release position as shown in the 
illustration.
 
lMatch the guide ends (2) of the drum 
unit to the c marks (1) on both sides of 
the machine, then gently slide the drum 
unit into the machine until it stops at the 
green lock lever.
 
mTurn the green lock lever (1) clockwise 
to the lock position.
 
1
1
2
1
 

58
nPush the drum unit in until it stops. 
oClose the front cover of the machine.
pPut the Styrofoam piece (1) into the 
carton. Then put the waste toner box in 
the Styrofoam piece.
 
qWrap the machine with a plastic bag. 
Put the machine on the Styrofoam piece 
(1). 
 
FRONT
1
FRONT1
 

Routine maintenance
59
A
rPut the two styrofoam pieces (1) into the 
carton matching the right of the machine 
to the RIGHT mark on one of the 
styrofoam pieces, and the left of the 
machine to the LEFT mark on the 
other styrofoam piece. Put the AC 
power cord and printed materials in the 
original carton as shown in the 
illustration.
 
sClose the carton and tape it shut.
RIGHT LEFT
11
 

60
B
Optional paper tray 
(LT-300CL)
B
An optional lower tray can be installed, and it 
can hold up to 500 sheets of 80 g/m
2 paper.
When an optional tray is installed, the 
machine can hold up to 800 sheets of plain 
paper.
 
For setup, see the Instructions that we have 
supplied with the lower tray unit.
Memory boardB
MFC-9465CDN has 256 MB of standard 
memory and MFC-9460CDN has 128 MB. 
Both models have one slot for optional 
memory expansion. You can increase the 
memory up to maximum of 512 MB for...

Options
61
B
Note
• There might be some SO-DIMMs that will 
not work with the machine.
• For more information, call the dealer you 
bought the machine from or Brother 
Customer Service.
 
Installing extra memoryB
aTurn off the machine’s power switch. 
Unplug the telephone line cord.
bDisconnect the interface cable from the 
machine, and then unplug the power 
cord from the electrical socket.
Note
Be sure to turn off the machine’s power 
switch before you install or remove the 
SO-DIMM.
 
cRemove the...

62
eHold the SO-DIMM by the edges and 
align the notches in the SO-DIMM with 
the protrusions in the slot. Insert the 
SO-DIMM diagonally (1), then tilt it 
toward the interface board until it clicks 
into place (2).
 
fPut the metal (2) and then the plastic (1) 
SO-DIMM covers back on.
 
gPlug the machine’s power cord back into 
the electrical socket first, and then 
connect the interface cable. 
hPlug in the telephone line cord. Turn on 
the machine’s power switch.
Note
To make sure that you have...

63
C
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of 
these features depends on the model you purchased.
C
GlossaryC
ADF (automatic document feeder)
The document can be placed in the ADF 
and scanned one page at a time 
automatically.
Auto Reduction
Reduces the size of incoming faxes.
Automatic fax transmission
Sending a fax without picking up the 
handset of the external telephone.
Automatic Redial
A feature that enables your machine to 
redial the last...

64
ECM (Error Correction Mode)
Detects errors during fax transmission 
and resends the pages of the fax that had 
an error.
Extension telephone
A telephone on the fax number that is 
plugged into a separate wall socket.
External phone
A TAD (telephone answering device) or 
telephone that is connected to your 
machine.
F/T Ring Time
The length of time that the Brother 
machine fast double-rings (when the 
Receive Mode setting is Fax/Tel) to notify 
you to pick up a voice call that it answered.
Fax Detect...