Brother MFC 9120CN User Manual

Safety and legal109
A
To use the machine safelyA
Please keep these instructions for later reference and read them before attempting any maintenance.
WARNING 
There are high voltage electrodes inside the machine. Before you clean the inside of the 
machine, make sure you have unplugged the telephone line cord first and then the power cord 
from the electrical socket. Doing this will prevent an electrical shock.
 
 
 
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock....

110
 
DO NOT use flammable substances, any type of spray or any organic solvent/liquids contains 
alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a fire 
or electrical shock. See Routine maintenance on page 155 for how to clean the machine.
 
 
 
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner 
dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the 
toner dust with a dry, lint-free...

Safety and legal111
A
5 We DO NOT advise using an extension lead.
6 Never install telephone wiring during a lightning storm. Never install a telephone wall socket in a wet location.
7 If any cables become damaged, disconnect your machine, and contact your Brother dealer.
8 DO NOT place any objects on the machine, or obstruct the air vents.
9 This product should be connected to an adjacent grounded AC power source within the  range indicated on the rating label. DO NOT connect it to a DC power source or...

112
 
To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.
 
IMPORTANT
The fuser unit is marked with a caution label. Please DO NOT remove or damage the label.
 
  
 
 

Safety and legal113
A
Disconnect deviceA
This product must be installed near an electrical socket that is easily accessible. In case of 
emergencies, you must disconnect the power cord from the electrical socket to shut off power 
completely.
LAN connectionA
CAUTION 
DO NOT connect this product to a LAN connection that is subject to over-voltages.
 
Radio interferenceA
This product complies with EN55022 (CISPR Publication 22)/Class B. 
International ENERGY STAR® Qualification StatementA
The purpose of...

114
Important Information for AustraliaA
IMPORTANT-For Your SafetyA
To ensure safe operation the three-pin plug supplied must be inserted only into a standard 
threepin power point which is effectively grounded through the normal household wiring.
Extension cords used with the equipment must be three-conductor and be correctly wired to 
provide connection to ground. Incorrectly wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply that...

Safety and legal115
A
14 Never push objects of any kind into this product through cabinet slots, since they may touch dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never 
spill liquid of any kind on the product.
15 DO NOT attempt to service this product yourself, because opening or removing covers may  expose you to dangerous voltage points and/or other risks. Refer all servicing to service 
personnel
16 Wait until pages have exited the machine before picking...

116
5 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It 
indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. 
Above all, it provides no assurance that any item will work correctly in all respects with another 
item of Telepermitted equipment of a different make or model, nor does it imply that any 
product is compatible with all of...

Safety and legal117
A
20 DO NOT touch a document during printing.
21 Never push objects of any kind into this product through cabinet slots, since they may touch dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never 
spill liquid of any kind on the product.
22 DO NOT attempt to service this product yourself, because opening or removing covers may  expose you to dangerous voltage points and/or other risks. Refer all servicing to service 
personnel.
23 Unplug...

118
30 Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall 
be set to operate within the following limits for compliance with Telecom’s Specifications:
„ There shall be no more than 10 call attempts to the same number within any 30 minute 
period for any single manual call initiation, and
„ The equipment shall go on-hook for a period of not less than 30 seconds between the end 
of...