Brother Mfc 8370dn User Manual

Chapter 12
80
Using the Options key12
Use the Options key to quickly set the following copy settings temporarily for the next copy.
Press
 
Menu selections Options Page
Press a or b, then press OK
 Press a or b, then press OK 
Stack/Sort
(appears when the document is 
in the ADF)Stack*
Sort81
QualityAuto*
Photo
Text81
Brightnessb-nnnno+a
b-nnnon+a
b-nnonn+a*
b-nonnn+a
b-onnnn+a81
Contrastb-nnnno+a
b-nnnon+a
b-nnonn+a*
b-nonnn+a
b-onnnn+a82
Page LayoutOff(1 in 1)*
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1...

Making copies
81
12
Sorting copies using the ADF12
You can sort multiple copies. Pages will be 
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so 
on.
aMake sure you are in Copy mode  .
bUnfold the ADF output tray and place 
your document face down in the ADF 
input tray.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Options and a or b to choose 
Stack/Sort.
PressOK.
ePress a or b to choose Sort.
PressOK.
fPress Start.
Improving copy quality12
You can choose from a range of quality...

Chapter 12
82
To change the default setting follow the steps 
below:
aPress Menu, 3, 2.
bPress a to make a lighter copy or press 
b to make a darker copy.
Press OK.
cPress Stop/Exit.
Contrast12
Adjust the contrast to help an image look 
sharper and more vivid.
To temporarily change the contrast setting, 
follow the steps below:
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Options.
Press a or b to choose Contrast.
Press OK....

Making copies
83
12
hPut the next page on the scanner glass.
Press OK.
Repeat stepsg and h for each page of 
the layout.
iAfter all the pages have been scanned, 
press 2 in stepg to finish.
Place the document face down in the 
direction shown below:
12
„2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
Tray selection12
You can change the Tray Use only for the 
next copy.
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress...

Chapter 12
84
Duplex (2-sided) 
copying 
12
If you want to use the duplex copy feature, 
load your document in the ADF.
If you get an Out of Memory message 
while you are making duplex copies, try 
installing extra memory. (See Out of memory 
message on page 86.)
Duplex Copy 
(long edge flip)12
MFC-8370DN
„1sidedi2 sided L
Portrait
 
Landscape
 
aMake sure you are in Copy mode  .
bUnfold the ADF output tray and place 
your document face down in the ADF 
input tray.
cEnter the number of copies (up to 99)...

Making copies
85
12
cEnter the number of copies (up to 99) 
using the dial pad.
dPress Duplex and a or b to select 
1sidedi2sided L, 
2sidedi2sided or 
2Sided Li1Sided.
 
Duplex
1sidedi2sided Le
PressOK.
ePress Start to copy the document.
Note
• Duplex copy using a 2-sided legal size 
document is not available.
• (L) means Long edge and (S) means 
Short edge.
 
Advanced Duplex Copy 
(short edge flip)12
MFC-8370DN
„1sidedi2sided S
Portrait
 
Landscape
 
aMake sure you are in Copy mode  .
bUnfold the ADF...

Chapter 12
86
ePress a or b to select 
2Sided Si1Sided or 
1sidedi2sided S. Press OK.
fPress Start to copy the document.
Note
• Duplex copy using a 2-sided legal size 
document is not available.
• (L) means Long edge and (S) means 
Short edge.
 
Out of memory 
message
12
If the memory becomes full while you are 
making copies, the LCD message will guide 
you through the next step.
If you get an Out of Memory message 
while scanning a subsequent page, you will 
have the option to press Start to copy the...

Section IV
Direct printingIV
Printing data from a USB Flash memory 
drive or a digital camera supporting mass 
storage
88
 

88
13
With the Direct Print feature, you do not need 
a computer to print data. You can print by just 
plugging your USB Flash memory drive into 
the machine’s USB direct interface. You can 
also connect and print directly from a camera 
set to USB mass storage mode.
Note
• Some USB Flash memory drives may not 
work with the machine.
• If your camera is in PictBridge mode, you 
cannot print data. Please refer to the 
documentation supplied with your camera 
to switch from PictBridge mode to mass 
storage...

Printing data from a USB Flash memory drive or a digital camera supporting mass storage
89
13
Printing data directly 
from the USB Flash 
memory drive or digital 
camera supporting 
mass storage
13
aConnect your USB Flash memory drive 
or digital camera to the USB direct 
interface (1) on the front of the machine.
 
 
Note
For MFC-8380DN
• If the Direct Print setting of Secure 
Function Lock 2.0 is set to Off for all 
users (including Public mode settings), 
Not Available will appear on the LCD 
and then...