Brother Mfc 8220 User Manual

IMPORTANT INFORMATION   11 - 1
11
IEC 60825 Specification
This machine is a Class 1 laser product as defined in IEC 60825 
specifications. The label shown below is attached in countries where 
required.
This machine has a Class 3B Laser Diode which emits invisible laser 
radiation in the Scanner Unit. The Scanner Unit should not be 
opened under any circumstances.
Laser Diode
Wave length: 760 - 810 nm
Output: 5 mW max.
Laser Class: Class 3B
Caution
Use of controls, adjustments or performance of...

11 - 2   IMPORTANT INFORMATION
Important Information for Australia
Important Safety Instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Switch off before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning.
5Do not place this product on an unstable surface, stand, or table. 
The product may fall, causing serious damage to the product.
6Slots and openings in the cabinet and the back or...

IMPORTANT INFORMATION   11 - 3
12Never push objects of any kind into this product through cabinet 
slots, since they may touch dangerous voltage points or short 
out parts resulting in a risk of fire or electric shock. Never spill 
liquid of any kind on the product.
13Do not attempt to service this product yourself, because 
opening or removing covers may expose you to dangerous 
voltage points and/or other risks. Refer all servicing to service 
personnel.
14Unplug this product from the mains power and...

11 - 4   IMPORTANT INFORMATION
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug supplied must be 
inserted only into a standard three-pin power point which is 
effectively grounded through the normal household wiring.
Extension cords used with the equipment must be three-conductor 
and be correctly wired to provide connection to ground. Incorrectly 
wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply 
that the...

IMPORTANT INFORMATION   11 - 5
Important Information for New Zealand
Important Safety Instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Switch off before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning.
5The grant of a Telepermit for any item of terminal equipment 
indicates only that Telecom has accepted that the item complies 
with minimum conditions for connection to its network....

11 - 6   IMPORTANT INFORMATION
12All persons using this device for recording telephone 
conversations shall comply with New Zealand law. This requires 
that at least one party to the conversation is to be aware that it 
is being recorded. In addition, the Principles enumerated in the 
Privacy Act 1993 shall be complied with in respect to the nature 
of the personal information collected, the purpose for its 
collection, how it is to be used and what it disclosed to any other 
party.
13The Caller ID...

IMPORTANT INFORMATION   11 - 7
20Do not touch a document during printing.
21Never push objects of any kind into this product through cabinet 
slots, since they may touch dangerous voltage points or short 
out parts resulting in a risk of fire or electric shock. Never spill 
liquid of any kind on the product.
22Do not attempt to service this product yourself, because 
opening or removing covers may expose you to dangerous 
voltage points and/or other risks. Refer all servicing to service 
personnel....

11 - 8   IMPORTANT INFORMATION
26Note that some telephones are not compatible with this unit and 
dialing errors may result if the two devices are used together in 
other than quiet conditions. The Telecom Faults Service is not 
to be called should such problems arise. In such cases, it is 
recommended that the prefix and wanted number are dialed 
manually.
27This equipment may not provide for the effective hand-over of a 
call to another device connected to the same line.
28Immediately disconnect this...

IMPORTANT INFORMATION   11 - 9
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug supplied must be 
inserted only into a standard three-pin power point which is 
effectively grounded through the normal household wiring.
Extension cords used with the equipment must be three-conductor 
and be correctly wired to provide connection to ground. Incorrectly 
wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply 
that the...

11 - 10   IMPORTANT INFORMATION
Important Information for Some 
Countries
Important Safety Instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Switch off before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning.
5Do not place this product near water.
6Do not place this product on an unstable cart, stand, or table. 
The product may drop, causing serious damage to the product.
7Slots and...