Brother Mfc 7360nr User Manual

							Menu and features
121
C
2.Fax
(Continued)2.Setup Send
(In Fax mode only)1.Contrast Auto*
Light
DarkChanges the 
lightness or darkness 
of faxes you send.See1.
2.Fax 
ResolutionStandard*
Fine
S.Fine
PhotoSets the default 
resolution for 
outgoing faxes.
3.Delayed FaxSet Time=00:00Sets the time of day in 
24 hour format that 
the delayed faxes will 
be sent.
4.Batch TXOn
Off*Combines delayed 
faxes going to the 
same fax number at 
the same time of day 
into one transmission.
5.Real Time TXNext Fax:On
Next Fax:Off
On
Off*Sends a fax without 
using the memory.
6.Polled TX Standard*
SecureSets up your machine 
with a document to be 
retrieved by another 
fax machine.
7.Coverpg 
SetupNext Fax:On
Next Fax:Off
On
Off*
Print SampleAutomatically sends a 
cover page you have 
programmed.
8.Coverpage 
Note— Sets up your own 
comments for the fax 
cover page.
9.Overseas 
ModeOn
Off*If you are having 
difficulty sending 
faxes overseas, set 
this to On. Level 1 Level 2 Level 3 Options Descriptions Page
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							122
2.Fax
(Continued)3.Address Book 1.One Touch 
Dial— Stores up to 8 One 
Touch Dial numbers, 
so you can dial by 
pressing one key 
(and Start.)40
2.Speed Dial— Stores up to 200 
Speed Dial numbers, 
so you can dial by 
pressing only a few 
keys (and Start.)42
3.Setup Groups— Sets up to 8 Group 
numbers for 
Broadcasting.See
1.
4.Report 
Setting1.XMIT ReportOn
On+Image
Off*
Off+ImageSets initial setup for 
Transmission 
Verification Report.26
2.Journal 
PeriodOff
Every 50 Faxes*
Every 6 Hours
Every 12 Hours
Every 24 Hours
Every 2 Days
Every 7 DaysSets the interval for 
automatic printing of 
the Fax Journal.See
1.
5.Remote Fax 
Opt1.
Forward/StoreOff*
Fax Forward
Fax Storage
PC Fax Receive Sets the machine to 
forward fax 
messages, to store 
incoming faxes in the 
memory (so you can 
retrieve them while 
you are away from 
your machine), or to 
send faxes to your 
PC. 
(Backup Print) If you choose Fax 
Forward or PC-Fax 
Receive, you can turn 
on the safety feature 
Backup Print.
2.Remote 
Access---lSets your own code 
for Remote Retrieval.
3.Print 
Document— Prints incoming faxes 
stored in the memory. Level 1 Level 2 Level 3 Options Descriptions Page
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features
123
C
2.Fax
(Continued)6.Dial 
Restrict.1.Dial Pad Off*
Enter # twice
OnYou can set the 
machine to restrict 
dialling when using 
the dial pad.See1.
2.One Touch 
DialOff*
Enter # twice
OnYou can set the 
machine to restrict 
the dialling of 
One Touch numbers.
3.Speed Dial Off*
Enter # twice
OnYou can set the 
machine to restrict 
the dialling of Speed 
Dial numbers.
7.Remaining 
Jobs— — You can check which 
jobs are in the 
memory and lets you 
cancel scheduled 
jobs.
0.Miscellaneous 1.CompatibilityNormal*
Basic(for VoIP)
(MFC-7360N and 
MFC-7460DN)
High*
Normal
Basic(for VoIP)
(MFC-7860DW)Adjusts the 
equalization for 
transmission 
difficulties.
VoIP service 
providers offer fax 
support using various 
standards. If you 
regularly experience 
fax transmission 
errors, choose 
Basic(for VoIP).103
2.BT Call Sign
(U.K. only)On
Off*Uses with BT Call 
Sign.See
1.
3.Caller ID
(U.K. only)On*
Off
Display ID
Print ReportView or print a list of 
the last 30 Caller IDs 
stored in the memory.
Level 1 Level 2 Level 3 Options Descriptions Page
3.Copy 1.Quality—Auto*
Text
Photo
GraphYou can choose the 
Copy resolution for 
your type of 
document.See
1.
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Options Descriptions Page
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							124
3.Copy
(Continued)2.Brightness—-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+Adjust the brightness 
for copies.See1.
3.Contrast—-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+Adjusts the contrast 
for copies.
Level 1 Level 2 Level 3 Options Descriptions Page
4.Printer
(MFC-7860DW)1.Emulation—Auto*
HP LaserJet
BR-Script 3Chooses the 
emulation mode.See
1.
2.Print 
Options1.Internal 
Font1.HP LaserJet
2.BR-Script 3Prints a list of the 
machine’s internal 
fonts.
2.Configuration— Prints a list of the 
machine’s printer 
settings.
3.Test Print— Prints a test page.
3.Duplex—Off*
On(Long Edge)
On(Short Edge)Enables or disables 
duplex printing. You 
can also choose long 
edge or short edge 
duplex printing.
4.Reset 
Printer—1.Reset
2.ExitRestores the printer 
settings to the original 
factory default 
settings.
1See Software User’s Guide.
 The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Options Descriptions Page
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features
125
C
Level 1 Level 2 Level 3 Options Descriptions Page
4.Print 
Reports
(MFC-7360N and 
MFC-7460DN)
5.Print 
Reports
(MFC-7860DW)1.XMIT Verify 1.View on LCD— Prints a Report for 
your last 
transmission.See
1.
2.Print Report—
2.Help List— — Prints the Help List so 
you can see at-a-
glance how to quickly 
program your 
machine.
3.Tel Index 
List1.Numeric— Lists names and 
numbers stored in the 
One Touch and 
Speed Dial memory, 
in numerical or 
alphabetical order. 2.Alphabetic—
4.Fax Journal— — Lists information 
about your last 200 
incoming and 
outgoing faxes. (TX 
means Transmit. RX 
means Receive.)
5.User 
Settings— — Lists your settings.
6.Network 
Config— — Lists your Network 
settings.
7.Order Form— — You can print an 
accessories order 
form to fill out and 
send to you Brother 
dealer.
8.WLAN Report
(MFC-7860DW)— — Prints the result of 
wireless LAN 
connectivity 
diagnosis.See
2.
1See Advanced Users Guide.
2See Quick Setup Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							126
Level 1 Level 2 Level 3 Level 4 Options Descriptions
5.Network
(MFC-7360N 
and 
MFC-7460DN)1.TCP/IP 1.Boot 
Method—Auto*
Static
RARP
BOOTP
DHCPChooses the Boot 
method that best 
suits your needs.
2.IP Address— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet 
Mask— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node Name—BRNXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
Config—Auto*
StaticChooses the WINS 
configuration mode.
7.WINS 
Server—Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS Server—Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA—On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6—On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
See Network User’s Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features
127
C
5.Network
(MFC-7360N 
and 
MFC-7460DN)
(Continued)2.Ethernet——Auto*
100B-FD
100B-HD
10B-FD
10B-HDChooses the 
Ethernet link mode.
3.Status——Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFFShows the Ethernet 
link status.
4.MAC 
Address— — — Shows the MAC 
address of the 
machine.
5.Scan To 
FTP
(MFC-7460DN)——Color 100 dpi*
Color 200 dpi
Color 300 dpi
Color 600 dpi
Gray 100 dpi
Gray 200 dpi
Gray 300 dpi
B&W 200 dpi
B&W 200x100 dpiChooses the file 
format to send the 
scanned data via 
FTP.
0.Network 
Reset——1.Reset
2.ExitRestore all network 
settings to factory 
default.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
6.Network
(MFC-7860DW)1.Wired LAN 1.TCP/IP 1.Boot 
MethodAuto*
Static
RARP
BOOTP
DHCPChooses the Boot 
method that best 
suits your needs.
2.IP Address[000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
See Network User’s Guide.
 The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network User’s Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							128
6.Network
(MFC-7860DW)
(Continued)1.Wired LAN
(Continued)1.TCP/IP
(Continued)3.Subnet 
Mask[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node NameBRNXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
ConfigAuto*
StaticChooses the WINS 
configuration mode.
7.WINS 
ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
2.Ethernet—Auto*
100B-FD
100B-HD
10B-FD
10B-HDChooses the 
Ethernet link mode. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network User’s Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features
129
C
6.Network
(MFC-7860DW)
(Continued)1.Wired LAN
(Continued)3.Wired 
Status—Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFFYou can see the 
current wired status.
4.MAC 
Address— — Shows the MAC 
address of the 
machine.
5.Set to 
Default—1.Reset
2.ExitRestore the wired 
network setting to 
factory default.
6.Wired 
Enable—On*
OffEnable or Disable the 
Wired LAN manually.
2.WLAN 1.TCP/IP 1.Boot 
MethodAuto*
Static
RARP
BOOTP
DHCPChooses the BOOT 
method that best 
suits your needs.
2.IP Address[000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet 
Mask[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node NameBRWXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
ConfigAuto*
StaticChooses the WINS 
configuration mode. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network User’s Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							130
6.Network
(MFC-7860DW)
(Continued)2.WLAN
(Continued)1.TCP/IP
(Continued)7.WINS 
ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
2.Setup 
Wizard— — You can configure 
your print server.
3.WPS/AOSS— — You can easily 
configure your 
wireless network 
settings using the 
one-button push 
method.
4.WPS w/PIN 
Code— — You can easily 
configure your 
wireless network 
settings using WPS 
with a PIN code. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network User’s Guide.
 The factory settings are shown in Bold with an asterisk.