Brother Mfc 490cw User Manual

Making copies79
11
Using a scanned paper document as 
your watermark
11
aPress (Copy).
bEnter the number of copies you want.
cPress  aor b to choose 
Watermark Copy .
Press  OK.
dPress  dor c to choose  On.
ePress  aor b to choose 
Current Setting .
Press  OK.
fPress  aor b to choose  Scan. Press  OK, 
and place the page that you want to use 
as a watermark on the scanner glass.
gPress  Mono Start  or Colour Start .
hTake out the watermark document you 
scanned and load the document you 
want to copy....

Chapter 11
80
‘Out of Memory’ 
message
11
If the  Out of Memory  message appears 
while scanning documents, press  Stop/Exit 
to cancel or  Mono Start or Colour Start  to 
copy the scanned pages.
You will need to clear some jobs from the 
memory before you can continue.
To free up extra memory, do the following:
„ Turn off Memory Receive. (See  Turning 
off Memory Receive Operations  
on page 42.)
„ Print the faxes that are in the memory. 
(See  Printing a fax from the memory  
on page 44.)
When you get...

Section IV
Direct Photo PrintingIV
Printing photos from a memory card or 
USB Flash memory drive
82
Printing photos from a camera101
 

82
12
PhotoCapture Center™ 
Operations
12
Printing from a memory card 
or USB Flash memory drive 
without a PC12
Even if your machine is not connected to your 
computer, you can print photos directly from 
digital camera media or a USB Flash memory 
drive. (See Print Images  on page 85.)
Scanning to a memory card or 
USB Flash memory drive 
without a PC12
You can scan documents and save them 
directly to a memory card or USB Flash 
memory drive. (See  Scan to a memory card 
or USB Flash memory drive  on...

Printing photos from a memory card or USB Flash memory drive83
12
Memory cards or a USB Flash 
memory drive folder structure12
Your machine is designed to be compatible 
with modern digital camera image files, 
memory cards and USB Flash memory drive; 
however, please read the points below to 
avoid errors:
„ The image file extension must be .JPG 
(Other image file extensions like .JPEG, 
.TIF, .GIF and so on will not be 
recognized).
„ PhotoCapture Center™ printing must be 
performed separately from...

Chapter 12
84
Getting started12
Firmly put a memory card or USB Flash 
memory drive into the correct slot.
 
1 USB Flash memory drive
2 CompactFlash
®
3 SD, SDHC
4Memory Stick
®, Memory Stick Pro™
5 xD-Picture Card™
CAUTION 
The USB direct interface supports only a 
USB Flash memory drive, a PictBridge 
compatible camera, or a digital camera that 
uses the USB mass storage standard. Any 
other USB devices are not supported.
 
Photo Capture  key indications:
 
„Photo Capture  light is on, the memory...

Printing photos from a memory card or USB Flash memory drive85
12
Entering PhotoCapture mode12
After you insert the memory card or USB 
Flash memory drive, press the (Photo Capture ) key to illuminate it in 
blue and display the PhotoCapture options on 
the LCD.
The LCD shows:
 
Press  aor b to scroll through the 
PhotoCapture key options.
„ View Photo(s)  (See page 85.)
„ Print Index  (See page 86.)
„ Print Photos  (See page 86.)
„ Enhance Photos  (See page 87.)
„ Search by Date  (See page 90.)
„ Print...

Chapter 12
86
Print Index (Thumbnails)12
The PhotoCapture Center™ assigns 
numbers for images (such as No.1, No.2, 
No.3, and so on).
 
The PhotoCapture Center™ uses these 
numbers to identify each picture. You can 
print a thumbnail page to show all the pictures 
on the memory card or USB Flash memory 
drive.
Note
Only file names that are 8 characters or 
less will be printed correctly on the index 
sheet.
 
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press...

Printing photos from a memory card or USB Flash memory drive87
12
eRepeat stepd until you have entered 
the image numbers that you want to 
print.
Note
• You can enter the numbers at one time by  using the  l key for a comma or the  # key 
for a hyphen. For example, Enter  1, l, 3, 
l ,  6 to print images No.1, No.3 and No.6. 
Enter  1,  #, 5 to print images No.1 to No.5.
• You can enter up to 12 characters  (including commas) for the image 
numbers you want to print.
 
fAfter you have chosen the image...

Chapter 12
88
Enhance Skin-Tone12
Enhance Skin-Tone is best used for adjusting 
portrait photographs. It detects human skin 
colour in your photos and adjusts the image.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( Photo Capture ). 
bPress aor b to choose 
Enhance Photos .
Press  OK.
cPress  dor c to choose your photo.
Press  OK.
dPress  aor b to choose 
Enhance Skin-Tone .
Press  OK.
eDo one of the following:
„ Press  OK if you do not want to 
change...