Barco Xlm Hd30 Owners Manual

7. Installation
7. INSTALLATION
Overview
• Start up of the installation mode
• Input slots
•Configuration
• Lens
• Tilt adjustment
• Internal Patterns
• Quick Access Keys
• Buttons
•Macros
7.1 Start up of the installation mode
Start up
1. Push the cursor key↑or↓to highlightInstallation. (menu 7-1)
2. PressENTERto select.
TheInstallationmode will be displayed. (menu 7-2)
MAIN
Select a path from
below :
ADJUSTMENT MODE
INSTALLATION
SERVICE
Select with↑or↓
then 
 to return
Menu 7-1
INSTALLATION
INPUT SLOTS...

7. Installation
Possible results
SourceIndication
Video
d320 cvbs/S-vid [cvbs]
S-Video d320 cvbs/S-vid [s-vid]
RGB analogd320 an uxga
d320 yuv/rgsb [rgsb]
Component Video d320 yuv/rgsb [yuv]
DVI d320 dvi
SDId320 sdi
HD-SDId320 hdsdi
7.3 Configuration
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
• front/table
• front/ceiling
• rear/table
• rear/table
Set up the Correct Configuration
1. Push the...

7. Installation
The lens menu will be displayed. (menu 7-7)
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-6
LENS ADJUSTMENT
LENS TYPE
ZOOM/FOCUS
SHIFT
- Lens files -
RUN
SAVE
RENAME
COPY
DELETE
ABSOLUTE POSITIONING
Select with↑or↓
then 
 to return
Menu 7-7
7.4.2 Lens selection
What can be done ?
The current used lens can be selected out of a list of possible lenses for the projector. Once a lens is selected,...

7. Installation
4. Whenfinished, pressEXITto return to the lens adjustment menu or pressENTERto go to the shift function.
LENS ADJUSTMENT
LENS TYPE
ZOOM/FOCUS
SHIFT
- Lens files -
RUN
SAVE
RENAME
COPY
DELETE
ABSOLUTE POSITIONING
Select with↑or↓
then 
 to return
Menu 7-10
LENS ADJUSTMENT
ZOOM/FOCUS
ZOOM with↑or↓
FOCUS with←or→
ENTER to SHIFT
 to return
Menu 7-11
How to shift the image?
1. When on the Zoom/Focus menu, pressENTERto switch to the shift menu or
2. When on the Lens Adjustment menu, push the...

7. Installation
The selectedfile will be loaded.
LENS ADJUSTMENT
LENS TYPE
ZOOM/FOCUS
SHIFT
- Lens files -
RUN
SAVE
RENAME
COPY
DELETE
ABSOLUTE POSITIONING
Select with↑or↓
then 
 to return
Menu 7-14
RUN LENS
L
ens-settingsnameAttr.File 1 rw-
File 2 rw-
Select with↑or↓
 to select
 to return
Menu 7-15
7.4.4.2 Save lens settings
What can be done ?
A typical lens setting (zoom/focus and shift) can be stored in afile for future recalls.
How to save ?
1. Push the cursor key↑or↓to highlightSave. (menu 7-16)
2....

7. Installation
6. PressENTERto confirm the changes.
Thefile will be renamed.
LENS ADJUSTMENT
LENS TYPE
ZOOM/FOCUS
SHIFT
- Lens files -
RUN
SAVE
RENAME
COPY
DELETE
ABSOLUTE POSITIONING
Select with↑or↓
then 
 to return
Menu 7-18
RENAME LENS
L
ens-settingsnameAttr.File 1 rw-
File 2 rw-

Select with↑or↓
 to select
 to return
Menu 7-19
RENAME FILE
From filename:
B
To filename:
B
Select with←or→
Reprogram with↑,↓or
numeric keys
 to confirm
 to return
Menu 7-20
7.4.4.4 Copy lensfile
How to copy ?
1. Push the...

7. Installation
5. PressENTERto confirm the delete action.
LENS ADJUSTMENT
LENS TYPE
ZOOM/FOCUS
SHIFT
- Lens files -
RUN
SAVE
RENAME
COPY
DELETE
ABSOLUTE POSITIONING
Select with↑or↓
then 
 to return
Menu 7-24
DELETE LENS
L
ens-settingsnameAttr.File 1 rw-
File 2 rw-
Select with↑or↓
 to select
 to return
Menu 7-25
CONFIRM DELETE FILE
Delete file
B
 to confirm
 to return
Menu 7-26
7.4.5 Lens absolute positioning
What can be done ?
The projector can detect the limits for the zoom, focus and shift of the...

7. Installation
3. PressEXITto return to the installation menu.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-29
94R59770014 XLM HD30 25/05/2009 

7. Installation
Tilt adjustment
Tilt with   or 
 to return
Image 7-1
7.6 Internal Patterns
About internal test patterns
2 types of test patterns are available, the ACSAR test patterns and the TI test patterns.
How to select a pattern
1. Push the cursor key↑or↓to highlightInternal Patterns. (menu 7-30)
2. PressENTERto select.
TheInternal Patternsmenu will be displayed. (menu 7-31)
3. Push the cursor key↑or↓to highlight the desired pattern. When on the last item in the list, just push↓key to scroll to...

7. Installation
7.7 Quick Access Keys
About quick access keys
The function keys F1 to F5 can be customer programmed to directly open a pre-stored menu. That menu can be any independent
menu out of the list of menus. A menu which is built up by the content of a previous menu cannot be stored behind a shortcut.
How to create a shortcut key
Scroll to the desired menu. Press the function key behind which the menu must be stored for 5 seconds. When the creation is
successfully, a confirmation message appears...