Barco Xlm Hd30 Owners Manual
Have a look at the manual Barco Xlm Hd30 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 183 Barco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
6. Adjustment Mode
6.7.4 ScenergiX overlap zone (horizontal scenergix)
Definitions
Image 6-22
Scenergix set up
Overlap : number of pixels that overlap
Horizontal resolution of 1 projector : 1024 for Graphics versions, 1280 for Reality versions, 1400 for SXGA projectors.
Total horizontal screen resolution : [(horizontal resolution of 1 projector) x 2] minus overlap.
Horizontal Resolution source : number of active pixels of the source.
Adjustment of Active pixels (Pact) of thefirst projector
1. Go toFile...](http://img.usermanuals.tech/thumb/733/58620/w64_barco_xlm_hd30-owner-s-manual-85.png "Page 86
6. Adjustment Mode
6.7.4 ScenergiX overlap zone (horizontal scenergix)
Definitions
Image 6-22
Scenergix set up
Overlap : number of pixels that overlap
Horizontal resolution of 1 projector : 1024 for Graphics versions, 1280 for Reality versions, 1400 for SXGA projectors.
Total horizontal screen resolution : [(horizontal resolution of 1 projector) x 2] minus overlap.
Horizontal Resolution source : number of active pixels of the source.
Adjustment of Active pixels (Pact) of thefirst projector
1. Go toFile...")
![Page 87
6. Adjustment Mode
6.7.5 ScenergiX overlap zone (vertical scenergix)
Definitions
Image 6-23
Scenergix overlap zone vertical
Overlap : number of pixels that overlap
Vertical resolution of 1 projector : 768 for Graphics versions, 1024 for Reality versions, 1050 for SXGA projectors.
Total vertical screen resolution : [(Vertical resolution of 1 projector) x 2] minus (overlap)
Vertical Resolution source : number of active lines of the source
Adjustment of Active lines (Lact) of thefirst projector
1. Go toFile...](http://img.usermanuals.tech/thumb/733/58620/w64_barco_xlm_hd30-owner-s-manual-86.png "Page 87
6. Adjustment Mode
6.7.5 ScenergiX overlap zone (vertical scenergix)
Definitions
Image 6-23
Scenergix overlap zone vertical
Overlap : number of pixels that overlap
Vertical resolution of 1 projector : 768 for Graphics versions, 1024 for Reality versions, 1050 for SXGA projectors.
Total vertical screen resolution : [(Vertical resolution of 1 projector) x 2] minus (overlap)
Vertical Resolution source : number of active lines of the source
Adjustment of Active lines (Lact) of thefirst projector
1. Go toFile...")
![Page 88
6. Adjustment Mode
A pattern with the different areas will be displayed. (image 6-24)
3. Use the cursor keys to move the border of the overlap area to the desired position (value between 0 and 255).
Setfirst the width of thefirst projector and repeat for the second one. (image 6-25, image 6-26)
SCENERGIX
STATUS [ON]
- size -
TOP
BOTTOM
LEFT
RIGHT
- black level -
LEVEL
Select with↑or↓
then
to return
Menu 6-82
Image 6-24
Width selections
84R59770014 XLM HD30 25/05/2009](http://img.usermanuals.tech/thumb/733/58620/w64_barco_xlm_hd30-owner-s-manual-87.png "Page 88
6. Adjustment Mode
A pattern with the different areas will be displayed. (image 6-24)
3. Use the cursor keys to move the border of the overlap area to the desired position (value between 0 and 255).
Setfirst the width of thefirst projector and repeat for the second one. (image 6-25, image 6-26)
SCENERGIX
STATUS [ON]
- size -
TOP
BOTTOM
LEFT
RIGHT
- black level -
LEVEL
Select with↑or↓
then
to return
Menu 6-82
Image 6-24
Width selections
84R59770014 XLM HD30 25/05/2009")
![Page 92
7. Installation
Possible results
SourceIndication
Video
d320 cvbs/S-vid [cvbs]
S-Video d320 cvbs/S-vid [s-vid]
RGB analogd320 an uxga
d320 yuv/rgsb [rgsb]
Component Video d320 yuv/rgsb [yuv]
DVI d320 dvi
SDId320 sdi
HD-SDId320 hdsdi
7.3 Configuration
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
• front/table
• front/ceiling
• rear/table
• rear/table
Set up the Correct Configuration
1. Push the...](http://img.usermanuals.tech/thumb/733/58620/w64_barco_xlm_hd30-owner-s-manual-91.png "Page 92
7. Installation
Possible results
SourceIndication
Video
d320 cvbs/S-vid [cvbs]
S-Video d320 cvbs/S-vid [s-vid]
RGB analogd320 an uxga
d320 yuv/rgsb [rgsb]
Component Video d320 yuv/rgsb [yuv]
DVI d320 dvi
SDId320 sdi
HD-SDId320 hdsdi
7.3 Configuration
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
• front/table
• front/ceiling
• rear/table
• rear/table
Set up the Correct Configuration
1. Push the...")
7. Installation 7. INSTALLATION Overview • Start up of the installation mode • Input slots •Configuration • Lens • Tilt adjustment • Internal Patterns • Quick Access Keys • Buttons •Macros 7.1 Start up of the installation mode Start up 1. Push the cursor key↑or↓to highlightInstallation. (menu 7-1) 2. PressENTERto select. TheInstallationmode will be displayed. (menu 7-2) MAIN Select a path from below : ADJUSTMENT MODE INSTALLATION SERVICE Select with↑or↓ then to return Menu 7-1 INSTALLATION INPUT SLOTS CONFIGURATION LENS TILT INTERNAL PATTERNS QUICK ACCESS KEYS BUTTONS MACROS OSD Select with↑or↓ then to return Menu 7-2 7.2 Input slots What can be done ? The input configuration of the variable inputs is shown in theInput slotsmenu. To view or the change the input configuration. 1. Push the cursor key↑or↓to highlightInput Slots. 2. PressENTERto select. The input slots menu will be displayed. (menu 7-3) INPUT SLOTS Slot Module type [config] 1. d320 SDI 2. d320 HDSDI 3. d320 DVI 4. d320 RGB AN UXGA Select with↑or↓ to toggle to return Menu 7-3 R59770014 XLM HD30 25/05/200987
7. Installation Possible results SourceIndication Video d320 cvbs/S-vid [cvbs] S-Video d320 cvbs/S-vid [s-vid] RGB analogd320 an uxga d320 yuv/rgsb [rgsb] Component Video d320 yuv/rgsb [yuv] DVI d320 dvi SDId320 sdi HD-SDId320 hdsdi 7.3 Configuration What can be done? The way of physical installation of the projector can be defined to the projector. The following installation configurations are possible: • front/table • front/ceiling • rear/table • rear/table Set up the Correct Configuration 1. Push the cursor key↑or↓to highlightConfiguration. (menu 7-4) 2. PressENTERto select. The configuration menu will be displayed. (menu 7-5) INSTALLATION INPUT SLOTS CONFIGURATION LENS TILT INTERNAL PATTERNS QUICK ACCESS KEYS BUTTONS MACROS OSD Select with↑or↓ then to return Menu 7-4 CONFIGURATION FRONT/TABLE FRONT/CEILING REAR/TABLE REAR/CEILING Select with↑or↓ then to return Menu 7-5 For more information, see Installation Guidelines . 7.4 Lens 7.4.1 Start up the lens functions How to start up. 1. Push the cursor key↑or↓to highlightLens. (menu 7-6) 2. PressENTERto select. 88 R59770014 XLM HD30 25/05/2009
7. Installation The lens menu will be displayed. (menu 7-7) INSTALLATION INPUT SLOTS CONFIGURATION LENS TILT INTERNAL PATTERNS QUICK ACCESS KEYS BUTTONS MACROS OSD Select with↑or↓ then to return Menu 7-6 LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-7 7.4.2 Lens selection What can be done ? The current used lens can be selected out of a list of possible lenses for the projector. Once a lens is selected, the settings for this lens are loaded. How to select 1. Push the cursor key↑or↓to selectLens type. (menu 7-8) 2. PressENTERto select. TheLens typemenu will be displayed. (menu 7-9) 3. Push the cursor key↑or↓to highlight the current mounted lens. 4. PressENTERto select. The settings for the selected lens will be loaded and next to Active lens, the number of the lens will befilled out. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-8 LENS TYPE L ENSARTICLENUMBERR9852950 XLD (1.0) R9852090 XLD (1.45–1.8) R9852092 XLD (1.8–2.4) R9852094 XLD (2.2–3.0) R9852100 XLD (2.8–5.5) R9852920 XLD (5.5–8.5) Active lens : R9852090 Select with↑or↓ then to return Menu 7-9 7.4.3 Lens adjustment What can be done ? All lens adjustments are motorized and can be adjusted with the RCU. The following items can be adjusted: • zoom/focus •shift How to Zoom/Focus ? 1. Push the cursor key↑or↓to select Zoom/Focus. (menu 7-10) 2. PressENTERto select. The lens adjustment pattern will be displayed with the adjustment instructions. (menu 7-11) 3. Push the cursor key↑or↓to zoom and←or→to focus the image. R59770014 XLM HD30 25/05/2009 89
7. Installation 4. Whenfinished, pressEXITto return to the lens adjustment menu or pressENTERto go to the shift function. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-10 LENS ADJUSTMENT ZOOM/FOCUS ZOOM with↑or↓ FOCUS with←or→ ENTER to SHIFT to return Menu 7-11 How to shift the image? 1. When on the Zoom/Focus menu, pressENTERto switch to the shift menu or 2. When on the Lens Adjustment menu, push the cursor key↑or↓to highlightShiftand pressENTERto display the shift menu. (menu 7-12) 3. PressENTERto select. The lens adjustment pattern will be displayed with the adjustment instructions. (menu 7-13) 4. Push the cursor key↑or↓to shift the image up or down and←or→to shift the image left or right. 5. Whenfinished, pressEXITto go to the lens adjustment menu or pressENTERto go to the zoom/focus function. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-12 LENS ADJUSTMENT SHIFT V SHIFT with↑or↓ H SHIFT with←or→ ENTER to ZOOM/FOCUS to return Menu 7-13 7.4.4 Lensfiles What is possible ? Lens settings can be stored infiles. These settings can be recalled and will be loaded. This recall can be added as item in a macro. 7.4.4.1 Run a lensfile How to run a lensfile ? 1. Push the cursor key↑or↓to highlightRun. (menu 7-14) TheRun lensmenu will be displayed. (menu 7-15) 2. Push the cursor key↑or↓to highlight the desiredfile. 3. PressENTERto select. 90 R59770014 XLM HD30 25/05/2009
7. Installation The selectedfile will be loaded. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-14 RUN LENS L ens-settingsnameAttr.File 1 rw- File 2 rw- Select with↑or↓ to select to return Menu 7-15 7.4.4.2 Save lens settings What can be done ? A typical lens setting (zoom/focus and shift) can be stored in afile for future recalls. How to save ? 1. Push the cursor key↑or↓to highlightSave. (menu 7-16) 2. PressENTERto start the save action. The save menu will be displayed. (menu 7-17) 3. Push the cursor key↑or↓to highlight. 4. PressENTERto select. Thefirst digit will be highlighted. 5. Use the↑or↓key to change the digit. Use the←or→key to go the next digit. 6. PressENTERto accept the new name. The lens settings will be saved with the new name. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-16 SAVE LENS L ens-settingsnameAttr.File 1 rw- File 2 rw- Select with↑or↓ to select to return Menu 7-17 7.4.4.3 Rename lensfile What can be done ? An existing lensfile can be renamed. When thisfile is used in a macro, the macro must be changed too. How to rename ? 1. Push the cursor key↑or↓to highlightRename. (menu 7-18) 2. PressENTERto select. Thefile selection menu will be displayed. (menu 7-19) 3. Push the cursor key↑or↓to highlight thefile which must be renamed. 4. PressENTERto select. The rename menu will be displayed. (menu 7-20) 5. Thefirst character will be highlighted. Reprogram with↑,↓or numeric keys. Select another character with←or→. R59770014 XLM HD30 25/05/2009 91
7. Installation 6. PressENTERto confirm the changes. Thefile will be renamed. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-18 RENAME LENS L ens-settingsnameAttr.File 1 rw- File 2 rw- Select with↑or↓ to select to return Menu 7-19 RENAME FILE From filename: B To filename: B Select with←or→ Reprogram with↑,↓or numeric keys to confirm to return Menu 7-20 7.4.4.4 Copy lensfile How to copy ? 1. Push the cursor key↑or↓to highlightCopy. (menu 7-21) Thefile selection menu will be displayed. (menu 7-22) 2. Push the cursor key↑or↓to highlight thefile which must be copied. The Copy lensfile menu will be displayed. (menu 7-23) 3. Thefirst character of theTofilenamewill be highlighted. Reprogram with↑,↓or numeric keys. Select another character with←or→ 4. PressENTERto confirm the copy action. The initialfile will be copied to a newfile. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-21 COPY LENS L ens-settingsnameAttr.File 1 rw- File 2 rw- Select with↑or↓ to select to return Menu 7-22 COPY FILE From filename: B To filename: B Select with←or→ Reprogram with↑,↓or numeric keys to confirm to return Menu 7-23 7.4.4.5 Delete lensfile How to delete ? 1. Push the cursor key↑or↓to highlightDelete.(menu 7-24) 2. PressENTERto select. Thefile selection menu will be displayed. (menu 7-25) 3. Push the cursor key↑or↓to highlight thefile which must be deleted. 4. PressENTERto select. The delete confirm menu will be displayed. (menu 7-26) 92 R59770014 XLM HD30 25/05/2009
7. Installation 5. PressENTERto confirm the delete action. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-24 DELETE LENS L ens-settingsnameAttr.File 1 rw- File 2 rw- Select with↑or↓ to select to return Menu 7-25 CONFIRM DELETE FILE Delete file B to confirm to return Menu 7-26 7.4.5 Lens absolute positioning What can be done ? The projector can detect the limits for the zoom, focus and shift of the current mounted lens. It will use these limits for the lens calibration and for the zoom, focus and shift values during a lens adjustment. How to select 1. Push the cursor key↑or↓to select Absolute positioning. (menu 7-27) 2. PressENTERto select. TheAbsolute positioningmenu will be displayed. (menu 7-28) 3. Push the cursor key↑or↓to select Absolute positioning and pressENTERto toggle between ON and OFF. When ON, zoom, focus and shift calibration can be set to ON and a calibration can be executed for the activated item. When ON and all calibration items are set to OFF, no calibration will take place whenExecute calibration. No calibration will be done at startup. However the lens absolute positioning is still functioning (the latest saved calibrations are used). 4. To activate a calibration, push the cursor key↑or↓to select the desired calibrationand pressENTERto toggle between ON and OFF. The following calibrations can be selected: - Zoom calibration - Focus calibration - Shift calibration 5. To execute the calibration, push the cursor key↑or↓to selectExecute calibration Calibration of the lens is started. This process can take several minutes when all calibration items areON. LENS ADJUSTMENT LENS TYPE ZOOM/FOCUS SHIFT - Lens files - RUN SAVE RENAME COPY DELETE ABSOLUTE POSITIONING Select with↑or↓ then to return Menu 7-27 LENS ABSOLUTE POSITIONING ABSOLUTE POSITIONING : OFF ZOOM CALIBRATION : OFF FOCUS CALIBRATION : OFF SHIFT CALIBRATION : OFF EXECUTE CALIBRATION Select with↑or↓ then to return Menu 7-28 7.5 Tilt adjustment How to tilt the image ? 1. Push the cursor key↑or↓to highlightTilt.(menu 7-29) The tilt pattern will be displayed. (image 7-1) 2. Push the cursor key↑or↓to tilt the image. R59770014 XLM HD30 25/05/2009 93
7. Installation 3. PressEXITto return to the installation menu. INSTALLATION INPUT SLOTS CONFIGURATION LENS TILT INTERNAL PATTERNS QUICK ACCESS KEYS BUTTONS MACROS OSD Select with↑or↓ then to return Menu 7-29 94R59770014 XLM HD30 25/05/2009
7. Installation Tilt adjustment Tilt with or to return Image 7-1 7.6 Internal Patterns About internal test patterns 2 types of test patterns are available, the ACSAR test patterns and the TI test patterns. How to select a pattern 1. Push the cursor key↑or↓to highlightInternal Patterns. (menu 7-30) 2. PressENTERto select. TheInternal Patternsmenu will be displayed. (menu 7-31) 3. Push the cursor key↑or↓to highlight the desired pattern. When on the last item in the list, just push↓key to scroll to more hidden items in the list. 4. PressENTERto display the selected pattern. The following ACSAR test patterns are available: -None - Alternating checker board - Checker board - Color bars - Convergence -Focus - Focus Blue -FocusRed - Focus Green - Full Screen Black - Full Screen Blue - Full Screen Green - Full Screen Red - Full Screen White -Hatch - Hatch Blue on Green - Hatch Blue on Red - HatchRedonGreen - Outline -Purity Next to it, a lot of TI test patterns are available. These test patterns will appear in the list with a prefix TI/ in their name. INSTALLATION INPUT SLOTS CONFIGURATION LENS TILT INTERNAL PATTERNS QUICK ACCESS KEYS BUTTONS MACROS OSD Select with↑or↓ then to return Menu 7-30 INTERNAL PATTERNS None Checkerboard Color bars Convergence Focus Full Screen Black Select with↑or↓ to accept to return Menu 7-31 R59770014 XLM HD30 25/05/200995
7. Installation 7.7 Quick Access Keys About quick access keys The function keys F1 to F5 can be customer programmed to directly open a pre-stored menu. That menu can be any independent menu out of the list of menus. A menu which is built up by the content of a previous menu cannot be stored behind a shortcut. How to create a shortcut key Scroll to the desired menu. Press the function key behind which the menu must be stored for 5 seconds. When the creation is successfully, a confirmation message appears on the screen. E.g. : Lens. Menus displaying a variable list cannot be selected for quick access. If a menu cannot be stored for quick access, no notification is displayed, the quick access functionality will not work. How to clear a quick access key 1. Push the cursor key↑or↓to highlightQuick access keys. (menu 7-32) 2. PressENTERto select. TheQuick access keysmenu will be displayed. (menu 7-33) 3. Push the cursor key↑or↓to select a quick access key or to selectClear all. 4. PressENTERto delete. INSTALLATION INPUT SLOTS CONFIGURATION LENS TILT INTERNAL PATTERNS QUICK ACCESS KEYS BUTTONS MACROS OSD Select with↑or↓ then to return Menu 7-32 Quick Access keys F1 : Input slots F2 : Lens F3 : Scenergix F4 : F5 : Clear all Select with↑or↓ then to delete to return Menu 7-33 7.8 Buttons What is possible ? Macros can be associated to buttons of the remote control. How to associate ? 1. Push the cursor key↑or↓to highlightButtons. (menu 7-34) 2. PressENTERto select. The buttons menu will be displayed. (menu 7-35) 3. Push the cursor key↑or↓to select the desired button. 4. PressENTERto select. TheChange buttonmenu will be displayed. (menu 7-36) 5. Push the cursor key↑or↓to select the desired macro. 6. PressENTERto select. 96 R59770014 XLM HD30 25/05/2009