Barco Xlm Hd30 Owners Manual

							A. Specifications
A. SPECIFICATIONS
A.1 XLM HD30
Overview
Ambient TemperatureMax 35°C (95°F)
Brightness uniformity>80%
Communication
• 1x RS-232C IN (D-9 connector)
• 1x RS-232C OUT (D-9 connector)
• 1x 2way prop. protocol to Rugged remote (5 pins XLR connector)
• 2x prop. protocol (RJ45 connector)
• xlr and mini-jack for wired remote control
• 2x base-T 10/100 (RJ45 connector)
Compatibility
• All current video sources (PAL, SECAM, NTSC) in Composite, S-VHS, Component
or RGB formats
• All currently proposed HDTV, extended and improved television standards (1080i,
720p)
• All computer graphics formats from VGA, SVGA, XGA, SXGA,full HD to UXGA
• Most Macintosh computers
• Electronic workstations with a resolution up to 1600 x 1200 pixels at 75 Hz
• Most computer sources with a pixel clock up to 200 MHz
• DVI sources up to DC2K (2048x1080)
Contrast ratio2000:1 fullfield – high contrast mode: 2800:1 (fullfield)
ConvergenceMax allowed convergence drift is 0.5 pixel.
This is checked on vertical and horizontal midlines only.
Corners are not applicable for convergence error.
This is measured with TLD 1.2 lens on axis
DimensionsWxLxH:
810 x 1563 x 631 mm
(31.9 x 61.5 x 24.8 inch)
Display3 Chip DLP DC2K (resolution of 2048 x 1080 pixels (aspect ratio 16:9)).
Dustfiltersmetalfilters
Electromagnetic Interferencecomplies with FCC rules & regulations, part 15 Class A and CE EN55022 Class A
Features
• Advanced multi windowing
• Colorkey between inputs
• Standard light shutter
• rigging point
• carrying handle
• motorized tilt
• fully sealed optics
• easy adjustable convergence
• P7 color processing
• use of a safe quickly replaceable lamphouse
Input source compatibility2048x1080 (max. input)
R59770014 XLM HD30 25/05/2009117 
						

							A. Specifications
InputsModular inputs:
Standard:
1x DVI
1x SDI
1x (HD)SDI (+ loop through)
1x RGB Analogue (up to UXGA)
Optional:
1x composite video/S-Video
1x RGB/YUV (both + loop through)
Lamp6.3 kW Xenon
Lamp warranty: 750 hrs
Lens encodersOn zoom and focus (with TLD lenses)
Lens ShiftVertical: -10% to +110%
Horizontal: -50% to +50%
(samll differences exist per lens type)
Lenses
Fixed focal lenses:
XLD 1.0 - R9852950
Zoom lenses:
XLD 1.45 - 1.8 - R9852090
XLD 1.8 - 2.4 - R9852092
XLD 2.2 - 3.0 - R9852094
XLD 2.8 - 5.5 - R9852100
XLD 5.5 - 8.5 - R9852920
Light Output30 000 Center Lumen
27 000 ANSI Lumen
Mains Voltage3 x 400 V + N or 3 x 220 V 50/60 HZ
Network connectionStandard (10/100 base-T; 2 ports; internal HUB)
Noise Level64dba @ 40°C
On board display serverEthernet control standard
remote control projector over ethernet via Projector Toolset
Order InformationR9004460 (incl. 4 inputs)
R9004461 (incl. 1 DVI)
R9852411 (Spare Lamp)
OutputsDB15 out (2048*1080 @ 60 HZ)
Picture-in-picture
Up to 4 sources simultaneous (with alpha blending; z-order; color keying)
Power consumption8000 W
Power Dissipation
max 25100 BTU/h
Resolution
2048 x 1080 (native)
Safety RegulationsCompliant with UL1950 and EN60950
Scan Frequenciespixel clock >162Mhz (uxga 60hz)
including true HD 1920 * 1080@ 50/60 Hz and 2048* 1080@ 50/60Hz
ScenergiXStandard horizontal and vertical electronic edge blending
Screen sizeFrom 1-16m and higher / 3-52ft.recommended
Sealed DLP™ coreStandard
118R59770014 XLM HD30 25/05/2009 
						

							A. Specifications
Shipping DimensionsWidth: 104 cm
Height: 104 cm
Depth: 176 cm
Floor Space: 1,8304 m²
Volume: 1,903616 m³
Gross Weight: 252 kg
Throw RatioLens Throw ratio
XLD 1.0 - 1.0
Zoom lenses:
XLD 1.45 - 1.8 -> 1.45 - 1.8
XLD 1.8 - 2.4 -> 1.8 - 2.4
XLD 2.2 - 3.0 -> 2.2 - 3.0
XLD 2.8 - 5.5 -> 2.8- 5.5
XLD 5.5 - 8.5 -> 5.5 - 8.5
Weight
180 kg (400 lbs)
R59770014 XLM HD30 25/05/2009119 
						

							A. Specifications
120R59770014 XLM HD30 25/05/2009 
						

							B. Standard Source Set up files
B. STANDARD SOURCE SET UP FILES
B.1 Table overview
Ta b l e o v e r v i e w
The following standard sourcefiles are pre-programmed in the projector.
Name
1Fvert
Hz
2
FHor
kHz
3
Fpix
MHz
4
Ptot5Pact6Ltot7Lact8
640x200-cga 59,924 15.700 14.318 912 640 262 200
640x350-ega 59,702 21,851 16,257 744 640 366 350
640x480@72 72,888 30,288 19,687 832 640 520 480
640x480@75 74,999 37,500 31,500 840 640 500 480
640x480@85 85,009 43,270 36,000 832 640 509 480
640x480-graph 59,941 31,469 25,175 800 640 525 480
640x480-txt 70,087 31,469 28,322 900 720 449 400
640x480@75-
iso75,000 39,375 31,500 800 640 525 480
800x600@56v56,251 35,157 36,001 1024 800 625 600
800x600@60v60,317 37,879 40,000 1056 800 628 600
800x600@72v72,188 48,077 50,000 1040 800 666 600
800x600@EOS46,228 48,077 32,067 1024 800 667 600
1024x768@6060,004 48,363 65,000 1344 1024 806 768
[email protected] 56,475 74,999 1328 1024 806 768
1024x768@70V69,705 56,182 74,610 1328 1024 806 768
1024x768@7271,955 58,140 80,000 1376 1024 808 768
1024x768@7575,030 60,024 78,751 1312 1024 800 768
1024x768@75-GS74,534 59,701 79,284 1328 1024 801 768
1024x768@8584,996 68,677 94,499 1376 1024 808 768
1024x768@100100,000 80,802 110,54 1368 1024 808 768
1024x768-EOS62,814 50,000 67,200 1344 1024 796 768
1152x864@7070,014 63,853 94,502 1480 1152 912 864
1152x864@7574,999 67,499 107,999 1600 1152 900 864
1152x864@8585,000 77,095 121,502 1576 1152 907 864
1280x800@6060,000 49,310 71,01 1440 1280 823 800
1280x1024@5031,161 52,350 54,811 1680 1280 1047 1024
1280x1024@6060,018 63,980 107,997 1688 1280 1066 1024
1280x1024@60V36,839 63,658 67,222 1728 1280 1056 1024
1280x1024@7272,002 76,970 130,08 1690 1280 1069 1024
1280x1024@7575,023 79,974 134,997 1688 1280 1066 1024
1. Name: name of file, contains the settings.
2. Fvert Hz: vertical frame frequency of the source
3. FHor kHz: horizontal frequency of the source
4. Fpix MHz: pixel frequency
5. Ftot : total pixels on one horizontal line.
6. Pact: active pixels on one horizontal line.
7. Ltot: total lines in one field
8. Lact: active lines in one field.
R59770014 XLM HD30 25/05/2009121 
						

							B. Standard Source Set up files
Name1Fvert
Hz
2
FHor
kHz
3
Fpix
MHz
4
Ptot5Pact6Ltot7Lact8
1280x1024@85 85,027 91,149 157,506 1728 1280 1072 1024
1280x1024@100 62,039 107,207 124,923 1728 1280 1072 1024
1400x1050@50 50,015 54,517 94,641 1736 1400 1090 1050
1400x1050@60v 59,979 65,317 121,751 1864 1400 1089 1050
1400x1050@75v 74,866 82,277 155,998 1896 1400 1099 1050
1400x1050@85v 84,958 93,879 179,497 1912 1400 1105 1050
1440x900@60 60,000 55,463 88,74 1600 1440 926 900
1600x1200@48V 96,006 62,500 135,000 2160 1600 651 600
1600x1200@60v 60,001 75,002 162,004 2160 1600 1250 1200
1600x1200@65v 64,998 81,248 175,496 2160 1600 1250 1200
1600x1200@70v 69,997 87,497 188,993 2160 1600 1250 1200
1920x1200@60 59,883 74,555 193,235 2592 1920 1245 1200
hd-1280x720@60p60,001 45,000 74,251 1650 1280 750 720
hd-1920x1035@30i60,000 33,720 74,184 2200 1920 562 517
hd-1920x1080@24p24,000 27,000 74,250 2750 1920 1125 1080
hd-1920x1080@24sf48,001 54,002 148,504 2750 1920 1125 1080
hd-1920x1080@25i50,044 28,125 74,249 2640 1920 562 540
hd-1920x1080@25p25,000 28,125 74,249 2640 1920 1125 1080
hd-1920x1080@30i60,000 33,720 74,184 2200 1920 562 540
hd-1920x1080@30p30,000 33,750 74,249 2200 1920 1125 1080
hd-1920x1080@60p60,011 67,513 148,528 2200 1920 1125 1080
VIDEO525 62,437 15,734 13,500 858 712 252 242
VIDEO625 50,080 15,625 13,500 864 702 312 287
8514_A 43,479 35,522 44,900 1264 1024 409 384
COMPUSC4 29,945 30,694 39,779 1296 1024 512 480
ED 59,943 31,470 28,638 910 735 525 480
FMR 42,323 36,440 28,570 784 640 431 400
FMTO_2 55,370 24,370 21,056 864 640 440 400
FOLSOM
2048x1080-5050,000 56,24 139,72 2488 2048 1124 1080
FOLSOM
2048x1080-6060,000 67,518 157,18 2328 2048 1125 1080
HDMAC25,020 31,250 39,125 1252 1024 625 570
INTER_GR67,170 61,796 92,941 1504 1184 920 886
MAC_266,667 35,000 30,240 864 640 525 480
MAC_360,147 24,480 15,667 640 512 407 384
MAC_460,147 24,480 17,234 704 560 407 384
MAC_560,158 22,259 16,670 704 512 370 342
MAC_674,546 49,722 57,280 1152 832 667 624
MAC_774,907 60,150 80,000 1330 1024 803 768
MAC_LC66,619 34,975 31,338 896 640 525 480
MAC_POR74,996 68,846 57,280 932 640 918 870
PAM500 60,000 26,400 22,810 864 640 440 400
PAM800 44,936 36,443 50,000 1372 1120 406 375
122R59770014 XLM HD30 25/05/2009 
						

							B. Standard Source Set up files
Name1Fvert
Hz
2
FHor
kHz
3
Fpix
MHz
4
Ptot5Pact6Ltot7Lact8
PC98_1 56,416 24,823 21,050 848 640 440 400
PC98_2 39,994 32,835 47,840 1457 1120 411 375
PC98_3 60,000 50,000 78,569 1571 1120 833 750
SG_50 50,000 62,500 130,313 2085 1600 1250 1200
SG_60_1 60,002 63,902 107,355 1680 1280 1065 1024
SG_60_2 60,000 48,780 64,390 1320 1024 813 768
SG_60_3 60,000 43,200 54,432 1260 960 720 680
SG_60_4 60,000 75,000 156,375 2085 1600 1250 1200
SUN
1152x900-6666,000 61,847 64,502 1528 1152 937 900
SUN
1152x900-7676,63 74,808 107,992 1504 1152 937 900
SUN
1600x1280-6766,931 89,286 200,000 2240 1600 1334 1280
SUN-SXGA-67 67,188 71,690 116,998 1632 1280 1067 1024
SUN-SXGA-67 76,106 81,129 134,999 1664 1280 1066 1024
SUNXGA60 59,984 48,287 64,125 1328 1024 805 768
SUNXGA70 70,041 56,596 74,250 1312 1024 808 768
SUNXGA77 77,069 62,040 84,375 1360 1024 805 768
SUP_MAC 60,000 48,780 63,999 1312 1024 813 768
no-signal 100,00 20,000 8,000 400 300 200 100
no-signal-i 100,00 20,000 8,000 400 300 200 100
Ta b l e B - 1
R59770014 XLM HD30 25/05/2009123 
						

							B. Standard Source Set up files
124R59770014 XLM HD30 25/05/2009 
						

							C. Maintenance
C. MAINTENANCE
Overview
• Pressure check of cooling liquid circuit
• Cleaning the dustfilters
• Cleaning the lens
C.1 Pressure check of cooling liquid circuit
When should it be done ?
The pressure of the cooling circuit should be checked on regular times. At least when replacing the lamp.
How to check
1. Unplug the projector from the wall outlet.
2. On the input side of the projector, remove the side by turning the 3 quarter turn fastener studs a quarter turn counter clockwise.
(image C-1)
3. Pull the top side of the cover out of its spring locks.
4. Check the manometer. The manometer is situate on the top right of the lamp house compartment. (image C-2)
The pressure should be ± 1 bar (with projector in OFF state). When lower than 0.5 bar, a corrective action should be taken by
qualified service personnel.
Any significant drops in pressure indicates leakage of liquid in the cooling circuit.
5. Hook on the side cover and close the 3 quarter turn fastener studs a quarter turn clockwise.
Image C-1
Removing the side cover
R59770014 XLM HD30 25/05/2009125 
						

							C. Maintenance
Image C-2
Pressure control
C.2 Cleaning the dustfilters
These items should be cleaned monthly under normal environment conditions. Equipment in very dusty or
otherwise contaminated areas may require more frequent maintenance.
If the airfilters are not regularly cleaned, the airflow inside the projector could be disrupted and cause over-
heating. Overheating may lead to the projector shutting down during operation.
Location of the airfilters
Two dustfilters are situated in the side cover on the opposite side of the inputs.
One dustfilter is situate on the front side but can be reached by opening the side cover on the input side.
Removing the airfilters
1. Unplug the projector from the wall outlet.
2. On the input side of the projector, remove the side by turning the 3 quarter turn fastener studs a quarter turn counter clockwise.
(image C-3)
3. Pull the top side of the cover out of its spring locks.
4. Take the dustfilter by the handles and slide out the dustfilter on the front side of the projector. (image C-4)
5. Clean that dustfilter and reinstall. Close the side cover.
6. Open the side cover on the opposite side in the same way and lay down the cover.
7. To take out thefirst dustfilter : left up both handles a little bit so that the frame of thefilter comes out of its socket and pull out
thefilter. (image C-5, image C-6)
8. To take out the second dustfilter which is cover by a metal plate, handle in the same way as for the previous dustfilter. (image C-7)
9. Clean thefilters and reinstall. Close the side cover.
126
R59770014 XLM HD30 25/05/2009